40 anos da UA
via aberta

informação para...
 

Publicações 2013

Livros

1.      José Carlos Noronha, Ligamento Cruzado Anterior, 2013. ISBN:978-989-98508-0-4

2.      José Carlos Noronha, Anterior Cruciate Ligament", 2013. ISBN:978-989-98508-1-1

 

Capítulos de Livros

1.      Noronha J., Platelet-Rich Plasma: Clinical Experience. In: Platelet-Rich Plasma, Lana JFSD, Andrade Santana MH, Dias Belangero W, Malheiros Luzo AC (eds). Springer Berlin Heidelberg, 2014; 203-213.

2.      Bandeira, J., Pereira, S.R., Fontes, T., Fernandes, P., Khattak, A.J., Coelho, M.C., An “Eco-traffic” assignment tool, Springer series “Advances in Intelligent Systems and Computing”, 10 pp., in press.

3.      Fontes, T., Silva L.M., Pereira, S.R., Coelho, M.C. Neural Networks to Predict Human Health Impacts of Traffic Emissions. Capítulo do livro “Progress in Artificial Intelligence”, Correia, Reis & Cascalho (Eds), Springer, pp. 21-29.

Artigos em Jornais Internacionais

1.      Barlat, F., Ha, J., Grácio, J.J., Lee, M.-G., Rauch, E.F., Vincze, G., Extension of homogeneous anisotropic hardening model to cross-loading with latent effects, International Journal of Plasticity 46 , pp. 130-142

2.      Borodachenkova, M., Santos, S.,Barlat, F., Gracio, J.J., A microstructure-based model for describing softening process during compression of Al-30%wt Zn alloy, International Review of Mechanical Engineering 7 (6) , pp. 1115-1120,

3.      Borodachenkova, M., Gracio, J.,Barlat, F., Picu, C.R., Transient negative strain hardening during severe plastic deformation of Al-30wt%Zn alloys, Key Engineering Materials 554-557 , pp. 3-11

4.      Borodachenkova, M., Gracio, J.,Picu, R., Barlat, F., A microstructure-based model for describing strain softening during compression of Al-30%wt Zn alloy, International Journal of Multiphysics7 (1) , pp. 77-86

5.      Butuc, M., Barlat, F., Gracio, J.,Vincze, G., A theoretical study of the effect of the double strain path change on the forming limits of metal sheet, Key Engineering Materials 554-557 , pp. 127-138

6.      De Morais, A.B., Cardoso, C.M.,Pereira, A.B., Evaluation of in-plane ply shear properties from unidirectional plate torsion tests, Composites Part A: Applied Science and Manufacturing 53 , pp. 168-175

7.      Grácio, J.J., Picu, C.R., Vincze, G.,Mathew, N., Schubert, T., Lopes, A.,Buchheim, C., Mechanical behavior of Al-SiC nanocomposites produced by ball milling and spark plasma sintering, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 44 (11) , pp. 5259-5269

8.      Kitayama, K., Tomé, C.N., Rauch, E.F., Gracio, J.J., Barlat, F., A crystallographic dislocation model for describing hardening of polycrystals during strain path changes. Application to low carbon steels, International Journal of Plasticity 46 , pp. 54-69

9.      Lee, M.G., Lee, J.W., Gracio, J.J.,Vincze, G., Rauch, E.F., Barlat, F., A dislocation-based hardening model incorporated into an anisotropic hardening approach, Computational Materials Science 79 , pp. 570-583

10.  Liao, J., Xue, X., Zhou, C., Barlat, F.,Gracio, J.J., A springback compensation strategy and applications to bending cases, Steel Research International 84 (5) , pp. 463-472

11.  Vincze, G., Barlat, F., Rauch, E.F.,Tomé, C.N., Butuc, M.C., Grácio, J.J., Experiments and modeling of low carbon steel sheet subjected to double strain path changes, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 44 (10) , pp. 4475-4479

12.  Wen, W., M'Guil, S., Ahzi, S., Gracio, J.J., Coupled effects of the lattice rotation definition, twinning and interaction strength on the FCC rolling texture evolution using the viscoplastic f-model, International Journal of Plasticity 46 , pp. 23-36

13.  Vitor Basto-Fernandes, V.B. Iryna Yevseyeva,: Information Resources Management Journal (IRMJ), Volume 26, Issue 1. Copyright © 2012. 14 pages. DOI: 10.4018/irmj.2013010105

14.  Caseiro, J.F., Valente, R.A.F.,Andrade-Campos, A., Yoon, J.W., On the elasto-plastic buckling of Integrally Stiffened Panels (ISP) joined by Friction Stir Welding (FSW): Numerical simulation and optimization algorithms, International Journal of Mechanical Sciences 76 , pp. 49-59

15.  Caseiro, J.F., Alves De Sousa, R.J.,Valente, R.A.F., A systematic development of EAS three-dimensional finite elements for the alleviation of locking phenomena, Finite Elements in Analysis and Design 73 , pp. 30-41

16.  De Sousa, R.A., Valente, R., Preface  Key Engineering Materials 554-557

17.  Duarte, I., Oliveira, M., Garcia-Moreno, F., Mukherjee, M., Banhart, J., Foaming of AA 6061 using multiple pieces of foamable precursor, Colloids and Surfaces A: Physicochemical and Engineering Aspects 438 , pp. 47-55

18.  Farias, J.B.S., Martins, M.A.B.E.,Afonso, D.G., Marabuto, S.R.H.,Ferreira, J.A.F., Alves De Sousa, R.J. CAD/CAM strategies for a parallel kinematics SPIF machine, Key Engineering Materials 554-557 , pp. 2221-2229

19.  Fernandesa, F.A.O., De Sousa, R.J.A., Finite element analysis of helmeted oblique impacts and head injury evaluation with a commercial road helmet, Structural Engineering and Mechanics 48 (5) , pp. 661-679

20.  Ferreira, E., Pinho-Da-cruz, J.,Andrade-Campos, A., Development of an optimized loading path for material parameters identification, Key Engineering Materials 554-557, pp. 2200-2211

21.  Fonseca, M.A., Abreu, B., Gonçalves, F.A.M.M., Ferreira, A.G.M., Moreira, R.A.S., Oliveira, M.S.A., Shape memory polyurethanes reinforced with carbon nanotubes, Composite Structures 99 , pp. 105-111

22.  Gil Andrade-Campos, A., Lopes, N.,Valente, R.A.F., Varum, H., Editorial, nternational Journal of Materials Engineering Innovation 4 (2) , pp. 81-83

23.  Grilo, T.J., Paulo, R.M.F., Silva, C.R.M., Davim, J.P., Experimental delamination analyses of CFRPs using different drill geometries, Composites Part B: Engineering 45 (1) , pp. 1344-1350

24.  Grilo, T.J., Valente, R.A.F., Alves De Sousa, R.J., On the study of distinct algorithmic strategies in the implementation of advanced anisotropic models with mixed hardening, Key Engineering Materials 554-557 , pp. 1174-1183

25.  Grilo, T.J., Souto, N., Valente, R.A.F.,Andrade-Campos, A., Thuillier, S.,Alves De Sousa, R.J., On the development and computational implementation of complex constitutive models and parameters' identification procedures, Key Engineering Materials 554-557 , pp. 936-948

26.  Guedes, R.M., Pereira, C.M.C.,Fonseca, A., Oliveira, M.S.A. The effect of carbon nanotubes on viscoelastic behaviour of biomedical grade ultra-high molecular weight polyethylene, Composite Structures 105 , pp. 263-268

27.  Lamas, B., Abreu, B., Fonseca, A.,Martins, N., Oliveira, M., Numerical analysis of percolation formation in carbon nanotube based nanofluids, International Journal for Numerical Methods in Engineering 95 (3) , pp. 257-270

28.  Lamas, B., Abreu, B., Fonseca, A.,Martins, N., Oliveira, M., Long-term MWCNTs nanofluids toward heat transfer capability improvement, Journal of Physical Chemistry C 117 (24) , pp. 12826-12834

29.  Mata, H., Natal Jorge, R., Santos, A.D., Parente, M.P.L., Valente, R.A.F.,Fernandes, A.A., Study of formability of sandwich shells with metal foam cores, Key Engineering Materials 554-557 , pp. 2252-2255

30.  Paulo, R.M.F., Teixeira-Dias, F.,Valente, R.A.F., Numerical simulation of aluminium stiffened panels subjected to axial compression: Sensitivity analyses to initial geometrical imperfections and material properties, Thin-Walled Structures 62 , pp. 65-74

31.  Paulo, R.M.F., Carlone, P., Valente, R.A.F., Teixeira-Dias, F., Palazzo, G.S., Integrated design and numerical simulation of stiffened panels including friction stir welding effects, Key Engineering Materials 554-557 , pp. 2237-2242

32.  Rah, K., Paepegem, W.V.,Habraken, A.M., Degrieck, J., De Sousa, R.J.A., Valente, R.A.F., Optimal low-order fully integrated solid-shell elements, Computational Mechanics 51 (3) , pp. 309-326

33.  Sher, B.R., Moreira, R.A.S. Dimensionless analysis of constrained damping treatments Composite Structures 99 , pp. 241-254

34.  Souto, N., Andrade-Campos, A.,Thuillier, S., Shape optimization of the conventional simple shear specimen, Key Engineering Materials 554-557 , pp. 2156-2164

35.  Zhiltsova, T.V., Oliveira, M.S.A.,Ferreira, J.A., Vasco, J.C., Pouzada, A.S., Pontes, A.J., Polymer flow dynamics in microimpressions: An experimental approach, Polymer Testing 32 (3) , pp. 567-574

36.  Zhiltsova, T.V., Oliveira, M.S.A.,Vasco, J.C., Pouzada, A.S., Pontes, A.J., Influence of mesh discretization on the prediction of polymer flow behaviour in microcavities, Materials Science Forum 730-732 , pp. 525-530

37.  Zhiltsova, T.V., Oliveira, M.S.A.,Ferreira, J.A., Integral approach for production of thermoplastics microparts by injection moulding Journal of Materials Science 48 (1) , pp. 81-94

38.  R.M. Coelho, R.J. Alves de Sousa,  F.A.O. Fernandes, F. Teixeira-Dias, New composite liners for energy absorption purposes, Materials & Design, Volume 43, January 2013, Pages 384–392

39.   I. Alcântara, F. Teixeira-Dias,  M. Paulino, Cork composites for the absorption of impact energy, Composite Structures, Volume 95, January 2013, Pages 16–27

40.  Ahmad, I., Singh, M.K., Pereira, M.L.,Pacheco, M., Santos, M.A., Duarte, A.C., Pereira, E., Grácio, J., Morphological, compositional and ultrastructural changes in the Scrobicularia plana shell in response to environmental mercury - An indelible fingerprint of metal exposure?, Chemosphere 90 (11) , pp. 2697-2704

41.  Alberto, N.J., Simões, R., De Oliveira, V., Kalinowski, H.J., Neto, V.F., Nogueira, R.N. Thermal monitoring of the diamond deposition process using regenerated FBG, Proceedings of SPIE - The International Society for Optical Engineering 8794 , art. no. 879408

42.  Araújo, E.B., Lima, E.C., Bdikin, I.K.,Kholkin, A.L., Thickness dependence of structure and piezoelectric properties at nanoscale of polycrystalline lead zirconate titanate thin films, Journal of Applied Physics 113 (18) , art. no. 187206

43.  Ball, V., Gracio, J., Vila, M., Singh, M.K., Metz-Boutigue, M.-H., Michel, M., Bour, J., (...), Buehler, M.J., Comparison of synthetic dopamine-eumelanin formed in the presence of oxygen and Cu2+ cations as oxidants, Langmuir 29 (41) , pp. 12754-12761

44.  Bystrov, V.S., Paramonova, E.V.,Bdikin, I.K., Bystrova, A.V., Pullar, R.C., Kholkin, A.L., Molecular modeling of the piezoelectric effect in the ferroelectric polymer poly(vinylidene fluoride) (PVDF), Journal of Molecular Modeling 19 (9) , pp. 3591-3602

45.  Chen, C.-T., Ball, V., De Almeida Gracio, J.J., Singh, M.K., Toniazzo, V., Ruch, D., Buehler, M.J., Self-assembly of tetramers of 5,6-dihydroxyindole explains the primary physical properties of eumelanin: Experiment, simulation, and design, ACS Nano 7 (2) , pp. 1524-1532

46.  Dias, P.A.N., Nasani, N., Horozov, T.S., Fagg, D.P., Non-aqueous stabilized suspensions of BaZr0.85Y0.15O3-d proton conducting electrolyte powders for thin film preparation, Journal of the European Ceramic Society 33 (10) , pp. 1833-1840

47.  Daniel Araújo de Macedo, Moises R Cesário, Dulce Maria de Araujo Melo, Rubens M. Nascimento, Carlos A. Paskocimas, Antonio Eduardo Martinelli,Duncan Paul Fagg, Microwave Assisted Self-Combustion Synthesis and Electrochemical Performance of LSCF-SDC Composite Cathodes ECS Trans. 2013 53(22): 7-15; doi:10.1149/05322.0007ecst

48.  Gonçalves, G., Portolés, M.-T.,Ramírez-Santillán, C., Vallet-Regí, M., Serro, A.P., Grácio, J., Marques, P.A.A.P., Evaluation of the in vitro biocompatibility of PMMA/high-load HA/carbon nanostructures bone cement formulations, Journal of Materials Science: Materials in Medicine , Volume: 24   Issue: 12   Pages: 2787-2796   DOI: 10.1007/s10856-013-5030-2

49.  Gonçalves, G., Vila, M., Portolés, M.-T., Vallet-Regi, M., Gracio, J.,Marques, P.A.A.P., Nano-graphene oxide: A potential multifunctional platform for cancer therapy, Advanced Healthcare Materials 2 (8) , pp. 1072-1090

50.  Khoryushin, A.V., Mozhaev, P.B.,Mozhaeva, J.E., Bdikin, I.K., Zhao, Y.,Andersen, N.H., Jacobsen, C.S.,Hansen, Jø.B., Substrate decoration for improvement of current-carrying capabilities of YBa2Cu3Ox thin films, Physica C: Superconductivity and its Applications 486 , pp. 1-8

51.  Kopyl, S., Bystrov, V., Bdikin, I.,Maiorov, M., Sousa, A.C.M., Filling carbon nanotubes with magnetic particles, Journal of Materials Chemistry C 1 (16) , pp. 2860-2866

52.  Krishna, R., Chandra, S., Bardhan, N., Salimian, M., Yang, Y.Y., Titus, E.,Gracio, J., Bahadur, D., Design of an amperometric glucose biosensor based on glucose oxidase/arginated-Fe3O4/ glassy carbon electrode, Science of Advanced Materials 5 (4), pp. 333-340

53.  Jat, S.K., Vijayan, N., Krishna, A.,Philip, J., Verma, S., Bdikin, I., Singh, B., (...), Halder, S.K., Nucleation kinetics, growth, mechanical, thermal and optical characterization of sulphamic acid single crystal, CrystEngComm 15 (46) , pp. 10034-10042

54.  Matesanz, MC ; Vila, M  ; Feito, MJ  ; Linares, J  ; Goncalves, G Vallet-Regi, M  ; Marques, PAAP  ; Portoles, MT, The effects of graphene oxide nanosheets localized on F-actin filaments on cell-cycle alterations, BIOMATERIALS  Volume: 34   Issue: 5   Pages: 1562 1569 DOI: 10.1016/j.biomaterials.2012.11.001

55.  Narendar, N., Mather, G.C., Dias, P.A.N., Fagg, D.P., The importance of phase purity in Ni-BaZr0.85Y 0.15O3-d cermet anodes - Novel nitrate-free combustion route and electrochemical study, RSC Advances 3 (3) , pp. 859-869

56.  Nasani, N., Dias, P.A.N., Saraiva, J.A., Fagg, D.P., Synthesis and conductivity of Ba(Ce,Zr,Y)O3-d electrolytes for PCFCs by new nitrate-free combustion method, International Journal of Hydrogen Energy 38 (20) , pp. 8461-8470

57.  Neto, V., Sousa, A., In focus on polymer behavior, Polymer International 62 (11) , pp. 1543

58.  Okhay, O., Krishna, R., Salimian, M.,Titus, E., Gracio, J., Guerra, L.M.,Ventura, J., Conductivity enhancement and resistance changes in polymer films filled with reduced graphene oxide, Journal of Applied Physics 113 (6) , art. no. 064307

59.  Rai, R., Valente, M.A., Bdikin, I.,Kholkin, A.L., Sharma, S., Enhanced ferroelectric and magnetic properties of perovskite structured Bi1-x-yGdxLayFe1-yTi yO3 magnetoelectric ceramics, Journal of Physics and Chemistry of Solids 74 (7) , pp. 905-912

60.  Rai, R., Coondoo, I., Rani, R.,Bdikin, I., Sharma, S., Kholkin, A.L., Impedance spectroscopy and piezoresponse force microscopy analysis of lead-free (1 - X) K 0.5Na 0.5NbO 3 - XLiNbO 3 ceramics, Current Applied Physics 13 (2) , pp. 430-440

61.  Sá, P., Barbosa, J., Bdikin, I.,Almeida, B., Rolo, A.G., Gomes, E.D.M., Belsley, M., (...), Isakov, D., Ferroelectric characterization of aligned barium titanate nanofibres, Journal of Physics D: Applied Physics 46 (10) , art. no. 105304

62.  Salimian, M., Okhay, O., Krishna, R.,Titus, E., Gracio, J., Guerra, L.,Ventura, J., (...), Khairnar, R.S., Electrical conductivity of LTA-zeolite in the presence of poly(vinyl alcohol) and poly(vinyl pyrrolidone) polymers, Polymer International 62 (11) , pp. 1583-1588

63.  Vila, M  ; Portoles, MT  ; Marques, PAAP ; Feito, MJ ; Matesanz, MC; Ramirez-Santillan, C ; Goncalves, G ; Cruz, SMA ; Nieto, A  ; Vallet-Regi, M NANOTECHNOLOGY  Volume: 23   Issue: 46     Article Number: 465103   DOI: 10.1088/0957-4484/23/46/465103

64.  L. Syam Sundar,  Md. Hashim Farookyb, S. Naga Saradab, M.K. Singha, Experimental thermal conductivity of ethylene glycol and water mixture based low volume concentration of Al2O3 and CuO nanofluids, International Communications in Heat and Mass Transfer, Volume 41, February 2013, Pages 41–46

65.  Bandeiras, C., Completo, A., Comparison between constitutive models for the solid phase of biphasic agarose/chondrocytes constructs for knee cartilage engineering, Computer Methods in Biomechanics and Biomedical Engineering 16 (SUPPL 1) , pp. 262-263

66.  Completo, A., Duarte, R., Fonseca, F., Simões, J.A., Ramos, A., Relvas, C., Biomechanical evaluation of different reconstructive techniques of proximal tibia in revision total knee arthroplasty: An in-vitro and finite element analysis, Clinical Biomechanics 28 (3) , pp. 291-298

67.  Ramos, A., Relvas, C., Completo, A.,Simões, J.A., Prediction of cement damage for the Stanmore and Charnley femoral stems, International Journal of Damage Mechanics 22 (5) , pp. 719-736

68.  Ramos, A., Duarte, R.J., Relvas, C.,Completo, A., Simões, J.A., The influence of acetabular bone cracks in the press-fit hip replacement: Numerical and experimental analysis, Clinical Biomechanics 28 (6) , pp. 635-641

69.  Ramos, A., Relvas, C., Completo, A.,Simões, J.A., Mesnard, M., The importance of the geometry of the screws in TMJ implant fixation, Computer Methods in Biomechanics and Biomedical Engineering 16 (SUPPL 1) , pp. 258-259

70.  Silva, N.M., Santos, P.M., Ferreira, J.A.F., Soares Dos Santos, M.P.,Ramos, A., Simões, J.A.O., Reis, M.J.C.S., Morais, R., Power management architecture for smart hip prostheses comprising multiple energy harvesting systems, Sensors and Actuators, A: Physical202 , pp. 183-192

71.  Soares dos Santos, M.P., Ferreira, J.A.F., Ramos, A., Simões, J.A.O.,Morais, R., Silva, N.M., Santos, P.M., (...), Oliveira, T., Instrumented hip implants: Electric supply systems Journal of Biomechanics 46 (15) , pp. 2561-2571

72.  Marques, H. R., Ramos, A., Mesnard, M., How can the orientation of CT scanning undermine the biomechanical performance of the intact mandible? A Finite element study, Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization, DOI: 10.1080/21681163.2013

73.  António Ramos, Hugo Marques and Michel Mesnard, 2013, The effect of mechanical properties of bone in the mandible, a numerical case study. Advances in Biomechanics & Applications, An Int'l Journal Vol. 1 No. 1,pp: 67-76.

74.  Ramos, A., Completo, A., Relvas, C., Simões, J. A., 2013. The formation of cracks at cement interfaces of different femoral stem designs.  European Orthopaedics and Traumatology: Volume 4, Issue 4 (2013), Page 205-215. DOI: 10.1007/s12570-013-0190-6

75.  Michel Mesnard, Antonio Ramos, Towards a Rigorous Approach to Designing a TemporoMandibular Joint Prosthesis. From Clinical Challenge to Numerical Prototype, Procedia CIRP, Volume 5, 2013, Pages 141-146. DOI: http://dx.doi.org/10.1016/j.procir.2013.01.029

76.  R.J. Duarte, A. Ramos & M. Mesnard (2013) Evaluation of a primary TMJ implant fixation using screws: a numerical study, Computer Methods in Biomechanics and Biomedical Engineering, 16:sup1, 242-243, DOI:10.1080/10255842.2013.815847

77.  Ines, L.; Duarte, C.; Silva, R. S.; et al., Identification of clinical predictors of flare in systemic lupus erythematosus patients: a 24-month prospective cohort study,  Rheumatology (Oxford) Volume: 53 Issue: 1 Pages: 85-9 Published: 2014  DOI: 10.1093/rheumatology/ket322

78.  Fonseca, Fernando; Oliveira, Joao Pedro; Marques, Pinho,  Maquet III procedure: what remains after initial complications - long-term results, Journal of Orthopaedic Surgery and Research Volume: 8 Published: MAY 1 2013  DOI: 10.1186/1749-799X-8-11  

79.  Santos, MarcoP Soares; Ferreira, JorgeA F.; Ramos, A.; et al.Multi-source Harvesting Systems for Electric Energy Generation on Smart Hip Prostheses, Biomedical Engineering Systems and Technologies Volume: 357 Pages: 80-96 DOI: 10.1007/978-3-642-38256-7_6

80.  Duarte, R.J.; Ramos, A.; Completo, A.; et al., The importance of femur/acetabulum cartilage in the biomechanics of the intact hip: experimental and numerical assessment, Computer Methods in Biomechanics and Biomedical Engineering Pages: 1-10 Published:2013 DOI: 10.1080/10255842.2013.854335

81.  Ramos, A.; Mesnard, M.; Relvas, C.; et al Theoretical assessment of an intramedullary condylar component versus screw fixation for the condylar component of a hemiarthroplasty alloplastic TMJ replacement system, J ournal of Cranio-Maxillofacial Surgery Published: 2013 DOI: 10.1016/j.jcms.2013.04.007

82.  Alloui, Z., Vasseur, P., Costa, V.A.F.,Sousa, A.C.M., Effect of a non-constant magnetic field on natural convection in a horizontal porous layer heated from the bottom, Journal of Engineering Mathematics81 (1) , pp. 141-155

83.  Costa, V.A.F., On the energy conservation formulation for flows in porous media including viscous dissipation effects Springer Proceedings in Mathematics and Statistics 28 , pp. 55-66

84.  Boeri, C.N., Neto Da Silva, F.J.,Ferreira, J.A.F., Saraiva, J.M.A.,Moreira, R.S., Equilibrium moisture content isotherms of codfish (gadus morhua), Journal of Aquatic Food Product Technology 22 (6) , pp. 551-563

85.  Hadavand, M., Nabovati, A., Sousa, A.C.M., Ferrofluid Permeation into Three-Dimensional Random Porous Media: A Numerical Study Using the Lattice Boltzmann Method, Transport in Porous Media 99 (1) , pp. 191-206

86.  Sundar, L.S., Singh, M.K., Sousa, A.C.M., Thermal conductivity of ethylene glycol and water mixture based Fe3O4 nanofluid, International Communications in Heat and Mass Transfer 49 , pp. 17-24,

87.  Syam Sundar, L., Singh, M.K.,Sousa, A.C.M., Investigation of thermal conductivity and viscosity of Fe3O4 nanofluid for heat transfer applications, International Communications in Heat and Mass Transfer 44 , pp. 7-14

88.  L. Syam Sundar, M. K Singh (2013) Convective heat transfer and friction factor correlations of nanofluid in a tube and with inserts: A review, Renewable and Sustainable Energy Reviews vol. 20, 23-35, 2013. URL: http://dx.doi.org/10.1016/j.rser.2012.11.041

89.  Margarida C. Coelho, Tânia Fontes, Jorge M. Bandeira, Sérgio R. Pereira, Oxana Tchepel, Daniela Dias, Elisa Sá, Jorge H. Amorim, Carlos Borrego. How to improve air quality regional simulations using detailed methodology of road traffic emission estimation, Science of the Total Environment, Volumes 470–471, February 2014, pp. 127–137.

90.  Barros, N., Fontes, T., Silva, M., Manso, M.C. (2013). How wide should be the adjacent area to an urban highway to prevent potential health impacts from traffic emissions?, Transportation Research Part A: Policy and Practise 50, 113-128.

91.  Sérgio Ramos Pereira, Margarida C. Coelho, Life cycle analysis of hydrogen – A well-to-wheels analysis for Portugal, International Journal for Hydrogen Energy, Volume 38(5), pp. 2029–2038.

92.  J. Bandeira, Tiago G. Almeida, Asad J. Khattak, Nagui M. Rouphail & Margarida C. Coelho, Generating emissions information for route selection – Experimental monitoring and routes characterization, Journal of Intelligent Transportation Systems: Technology, Planning, and Operations, Special Issue: Intelligent Transportation Systems Applications for the Environment and Energy Conservation (Part 1), Volume 17(1), pp. 1-15.

93.  Paulo Fernandes, Jorge Bandeira, Tânia Fontes, Sérgio Pereira, Bastian J. Schroeder, Nagui M. Rouphail, Margarida C. Coelho, Traffic restriction policies in an urban avenue: A methodological overview for a trade-off analysis of traffic and emission impacts using microsimulation, International Journal of Sustainable Transportation. In press.

94.  Bandeira, J., Carvalho, D., Khattak, A., Rouphail, N., Fontes, T., Fernandes, P., Pereira, S., Coelho, M. C. Empirical assessment of route choice impact on emissions over different congestion scenarios, International Journal of Sustainable Transportation. In press.

95.  Tânia Fontes, Paulo Fernandes, Hugo Rodrigues, Jorge Bandeira, Sérgio Ramos Pereira, Asad J. Khattak & Margarida C. Coelho, Are eco-lanes a sustainable option to reducing emissions in a medium-sized European city?, Journal of Transportation Research A: Policy and Practise. In press.

96.  Margarida C. Coelho, Smritikana Dutta & Fernando Neto da Silva, Biodiesel from microalgae in lagoons: an acceptable alternative fuel to the transportation crunch?, Transportation Research Record: Journal of the Transportation Research Board of the National Academies, Washington, D.C., No. 2385, 2013, pp. 11–18, DOI: 10.3141/2385-02

97.  Katayoun Salamati, Margarida C. Coelho, Paulo J. Fernandes, Nagui M. Rouphail, H.C. Frey, & Jorge Bandeira, Emission Estimation at Multilane Roundabouts: Effect of Movement and Approach Lane, Transportation Research Record: Journal of the Transportation Research Board of the National Academies, Washington, D.C., 2013, pp. 12–21, DOI: 10.3141/2389-02.

98.  J. Pinto, H. Varum, V.F. Neto, A. Paiva, P. Tavares, L. Fernandes, F. M. Nunes – “Performance improvement of earth-based building materials by adding domestic sugar - an experimental testing campaign”, NED University Journal of Research-Materials, September 6th 2013, in press.

99.  R. Velazquez, V.F. Neto, K. Uppireddi, B.R. Weiner, G. Morell, “Fabrication of Nanodiamond Coating on Steel”, Coatings 3 (2013) 243-252. DOI: 10.3390/coatings3040243

100.                     Raul Simões, J.C. Mendes, L. Pereira, Victor Neto, "Diamond and other Carbon Related Materials Applications in Photovoltaic Solar Cells", IEEE International Electro-Information Technology, DOI: 10.1109/EIT.2013.6632676

 

Artigos em Jornais Nacionais

1.      Ricardo, D., Ramos, A., Relvas, C., Completo, A., Simões, J. 2013. Avaliação numérica e experimental da transferência de carga na articulação total da anca com e sem prótese, Revista Portuguesa de Ortopedia e Traumatologia 21(3): 249-258.

 

 

 

Comunicações

Comunicações em Encontros Internacioanis

1.      Gavazzo, D., Completo, A., Nascimento, A., 2013. Biomechanical Analysis of Surgical Treatment of the Cervical Spine - Arthrodesis. Proceedings of the 4th International Confrence on Integrity, Reliability and Failure, Funchal, Portugal, 23-27 June 2013, pp. 347-348.

2.      Completo, A., Pereira, J., Ramos, A., Relvas, C., Simões, J., 2013. Biomechanical Analysis of Intrinsic Parameters in Knee Cartilage. Proceedings of the 4th International Confrence on Integrity, Reliability and Failure, Funchal, Portugal, 23-27 June 2013, pp. 353-354.

3.      Pereira, J., Completo, A., Ramos, A., Relvas, C., Simões, J., 2013. Biomechanical Analysis of the Wrist's Radiocarpal Joint. Proceedings of the Congress on Numerical Method in Engineering - CMN 2013. June 25-28, 2013 Bilbao, Spain, pp. 1101-1109, ISBN: 978-84-941531-4-3.

4.      Pereira, J., Completo, A., Ramos, A., Relvas, C., Simões, J., 2013. A finite element model analysis on the mechanical behavior of the radiocarpal bones under two physiological loading conditions. ESB2013- 19th Congress of the European Society of Biomechanics, August 24-29, Patras, Grécia, P59. EBook.

5.      Pereira, J., Completo, A., Ramos, A., Relvas, C., Simões, J., 2013.A biomechanical analysis of the radiocarpal arthroplasty under physiological load condition. ESB2013- 19th Congress of the European Society of Biomechanics, August 24-29, Patras, Grécia, P45 EBook.

6.      Completo, A., Pereira, J., Ramos, A., Relvas, C., Simões, J., 2013.Compuational evaluation of the mechanical stimuli in a specific patient knee cartilage. ESB2013- 19th Congress of the European Society of Biomechanics, August 24-29, Patras, Grécia, P53 EBook.

7.      Completo, A., Pereira, J., Ramos, A., Relvas, C., Simões, J., 2013.Numerical analysis of the effective mechanical stimuli in agarose cell constructs. ESB2013- 19th Congress of the European Society of Biomechanics, August 24-29, Patras, Grécia, P161 EBook.

8.      Bandeiras, C., Completo, A., 2013. Comparison between constitutive models for the solid phase of biphasic agarose/chondrocytes constructs for knee cartilage engineering. 38ème Congrès de la Société de Biomécanique – Marseille, France, 04-06 september. Computer Methods in Biomechanics and Biomedical Engineering, 16, 262-263.

9.      Ramos, A., Relvas, C., Completo, A., Simões, A., Mesnard, M., 2013. “The importance of the geometry of the screws in TMJ implant fixation”. 38ème Congrès de la Société de Biomécanique – Marseille, France, 04-06 september - Computer Methods in Biomechanics and Biomedical Engineering, 16, 258-259.

10.  Gavazzo, D., Completo, A., Nascimento, A., 2013. Biomechanical Analysis of Surgical Treatment of the Cervical Spine Arthroplasty. 38ème Congrès de la Société de Biomécanique – Marseille, France, 04-06 september. EBook.

11.  Cortez S., Completo, A., Alves, J., 2013. A numerical modelling approach to study the articular cartilage at different scales. ESB2013- 19th Congress of the European Society of Biomechanics, August 24-29, Patras, Grécia, S-544. EBook.

12.  Completo, A., Ramos, A., Relvas, C., Pereira, J., Simões, J., 2013. Numerical analysis of the biomechanical parameters in a specific patient knee cartilage. ISB 2013, XXIV Congress of International Society of Biomechanics, Natal, Brazil,  August 4-9, 2013, pp:184

13.  Completo, A., Ramos, A., Relvas, C., Pereira, J., Simões, J., 2013. A biomechanical analysis of the wrist under two physiological loading conditions of gripping action. ISB 2013, XXIV Congress of International Society of Biomechanics, Natal, Brazil,  August 4-9, 2013, pp: 96

14.  Completo, A., Ramos, A., Relvas, C., Pereira, J., Simões, J., 2013. A 3D finite element model of the radius, with the radial component of maestro prosthesis, under a maximal grip loading condition. ISB 2013, XXIV Congress of International Society of Biomechanics, Natal, Brazil, August 4-9, 2013, pp: 234.

15.  Marco P. Soares dos Santos, Jorge A.F. Ferreira, A. Ramos, José A.O. Simões, Raul Morais, Nuno M. Silva, M.J.C.S. Reis, T. Oliveira, 2013, OPTIMALITY ANALYSIS OF ORTHOPAEDIC IMPLANTS, in Proceedings of the 19th Congress of the European Society of Biomechanics (ESB2013), Patras, Greece, August 25-28.

16.  Tatiana Oliveira , Marco P. Soares dos Santos, Jorge A.F. Ferreira, A. Ramos, José A.O. Simões, Raul Morais, Nuno M. Silva, M.J.C.S. Reis, Paulo Santos, THERAPEUTIC METHODOLY FOR THE PREVENTION OF ASEPTIC LOOSENING OF PROSTHESIS, in Proceedings of the 19th Congress of the European Society of Biomechanics (ESB2013), Patras, Greece, August 25-28. 

17.  R.J.Duarte, A.Ramos and M.Mesnard, (2013), Evaluation of a primary TMJ implant fixation using screws: a numerical study, 38ème Congrès de la Société de Biomécanique, Marseille, France, 4- 6 September.

18.  António Ramos, Michel Mesnard, LOAD TRANSFER IN THE FOSSA COMPONENT IN TMJ ARTHROPLASTY. - ISB 2013, XXIV Congress of International Society of Biomechanics, Natal, Brazil,  August 4-9, 2013, pp:216.

19.  Lucie Monède-Hocquard, 1* Michel Mesnard, 3 António Ramos, 4 Olivier Gille, Optimization of a dynamic spinal implant: Selection of a polymer material, ISB 2013, XXIV Congress of International Society of Biomechanics, Natal, Brazil,  August 4-9, 2013, pp:70.

20.  Mesnard, M. and Ramos, A. Towards a Rigorous Approach to Designing a TemporoMandibular Joint Prosthesis, From clinical challenge to numerical prototype, First CIRP Conference in Biomanufacturing, 3-5 March, 2013, Tokyo Japan.

21.  Guilhermina Torrão, Nagui M. Rouphail, Margarida C. Coelho, “SEG” Indicator: An Innovative Tool for a Scenario-based Analysis on Crash Injury Risk Prediction and Sustainable Mobility, hEART 2013 - 2nd Symposium of the European Association for Research in Transportation, Stockholm, September 2013.

22.  Bandeira, J., Pereira, S.R., Fontes, T., Fernandes, P., Khattak, A.J., Coelho, M.C., An “Eco-traffic” assignment tool, 16th Euro Working Group on Transportation, Porto, September 2013.

23.  Guilhermina Torrão, Margarida C. Coelho & Nagui Rouphail, Binary Classification and Logistic Regression Models Application to Crash Severity, Word Conference for Transport Research - WCTR2013, Rio de Janeiro, July 2013.

24.  Smritikana Dutta, Fernando Neto da Silva, Margarida C. Coelho, Feasibility of microalgae biodiesel production using local water resources, 21st European Biomass Conference & Exhibition – Setting the course for a biobased economy, Copenhagen, June 2013.

25.  Katayoun Salamati, Margarida C. Coelho, Paulo J. Fernandes, Nagui M. Rouphail, H.C. Frey & Jorge Bandeira, Emission Estimation at Multilane Roundabouts: Effect of Movement and Approach Lane, 92nd Transportation Research Board Annual Meeting, Washington D.C., January 2013.

26.  Tânia Fontes, Paulo Fernandes, Hugo Rodrigues, Jorge Bandeira, Sérgio Ramos Pereira, Asad J. Khattak & Margarida C. Coelho, Are eco-lanes a sustainable option to reducing emissions in a medium-sized European city?, 92nd Transportation Research Board Annual Meeting, Washington D.C., January 2013.

27.  Margarida C. Coelho, Smritikana Dutta & Fernando Neto da Silva, Biodiesel from microalgae in lagoons: an acceptable alternative fuel to the transportation crunch?, 92nd Transportation Research Board Annual Meeting, Washington D.C., January 2013.

28.  José Grácio, Plasticity 2013

29.  Frederic Barlat, Plasticity 2013

30.  Gabriela Vincze, Plasticity 2013

31.  Gil Andrade de Campos - Plasticity 2013

32.  Marina Borodachenkova - Plasticity 2013

33.  Marina Borodachenkova – World Conference on Al, Milan

34.  Jose Gracio, COBEF, Brasil

35.  Jose Gracio, COBEF, Brasil

36.  Alexandra Bintu – ESAFORM 2013

37.  Diane du Perce - ESAFORM 2013

38.  Carmen Butuc - ESAFORM 2013

39.  Gabriela Vincze - ESAFORM 2013

40.  Saeed Tamimi - ESAFORM 2013

41.  Raul Simões, J.C. Mendes, L. Pereira, Victor Neto, "Diamond and other Carbon Related Materials Applications in Photovoltaic Solar Cells", IEEE International Electro-Information Technology Conference 2013, May 9-11 2013, Rapid City, SD, USA, DOI: 10.1109/EIT.2013.6632676

42.  Raul Simões, J.C. Mendes, L. Pereira, V.F. Neto, "Application of Diamond and other Carbon Related Materials Photovoltaic Solar Cells", International Conference on Diamond and Carbon Materials, 2-5 September 2013, Riva del Garda, Italy

43.  Nélia Alberto, Raul Simões, Rogério Nogueira, Victor Neto, “Diamond chemical vapour deposition on optical fibres - Deposition parameters optimization through Taguchi method”, International Conference on Diamond and Carbon Materials, 2-5 September 2013, Riva del Garda, Italy

44.  G Gonçalves, M Vila, PAAP Marques. Nano-graphene oxide: potentialities on cancer therapy. XXII International Materials Research Congress (IMRC) 2013, August 11-15, 2013, Cancun, Mexico

45.  Helena Nogueira, Paula Marques, Tito Trindade. SERS studies using hybrid nanostructures, SAVVY project training workshop “Applications of SERS to biodetection”, Centro de Investigación Cooperativa en Biomateriales - CIC biomaGUNE, August 29-30, 2013, San Sebastian, Spain

46.  Sandra M. A. Cruz, Helena I. S. Nogueira, Paula A. A. P. Marques Synthesis of graphene-based nanocomposites as SERS substrates in biodetection, , SAVVY project training workshop “Applications of SERS to biodetection”, Centro de Investigación Cooperativa en Biomateriales - CIC biomaGUNE, August 29-30, 2013, San Sebastian, Spain

47.  Sandra M. A. Cruz, Helena I. S. Nogueira, and Paula A. A. P. Marques, Ag-PVA membranes as new active SERS substrates to detect nucleic acids SAVVY project training workshop “Applications of SERS to biodetection”, Centro de Investigación Cooperativa en Biomateriales - CIC biomaGUNE , August 29-30, 2013, San Sebastian, Spain

48.  Sandra M. A. Cruz, Helena I. S. Nogueira, and Paula A. A. P. Marques. Ag-PVA polymer composites as new active SERS substrates for nucleic acids detection. Nanoscience and Nanotechnology International Conference, NanoPT 2013, February, 13-15 Porto, PT

 

Comunicações em Encontros Nacionais

1.      G. A. Torrão, N. M. Rouphail, M.C. Coelho, Desenvolvimento de um Indicador para Análise Integrada da Segurança, Eficiência e Desempenho Ambiental do Veículo. 10.ª Conferência Nacional do Ambiente, Aveiro, November 2013.

2.      S.R. Pereira, M.C. Coelho, Qual a tecnologia de propulsão elétrica mais sustentável? – Uma abordagem baseada na avaliação do ciclo de vida. 10.ª Conferência Nacional do Ambiente, Aveiro, November 2013.

3.      T. Fontes, J. Bandeira, S.R. Pereira, O. Tchepel, D. Dias, E. Sá, J.H. Amorim, C. Borrego, M.C. Coelho, Aplicação de modelos de emissões de tráfego para a modelação da qualidade do ar à escala regional. 10.ª Conferência Nacional do Ambiente, Aveiro, November 2013.

4.      T. Fontes, P. Fernandes, H. Rodrigues, J. Bandeira, S.R. Pereira, M.C. Coelho, Existência de painéis de mensagem variável para gestão de incidentes de tráfego urbano: Impacte nas emissões de poluentes. 10.ª Conferência Nacional do Ambiente, Aveiro, November 2013.

5.      Margarida C. Coelho, Jorge Bandeira, Tânia Fontes, Sérgio Pereira, Oxana Tchepel, Daniela Dias, Elisa Sá, Jorge H. Amorim, Carlos Borrego, Eco-Routing: Desenvolvimento de um sistema inteligente de suporte à decisão na escolha de rotas, 11.º Congresso Nacional ADFERSIT “Os transportes, a energia e o ambiente”, Estoril, October 2013.

6.      Fontes, T., Pereira, S.R., Coelho, M.C. Neural Networks to Predict Human Health Impacts of Traffic Emissions, EPIA 2013 – XVI Portuguese Conference on Artificial Intelligence, Angra do Heroísmo, September 2013.

7.      Paulo Fernandes, Jorge Bandeira, Margarida C. Coelho, Katayoun Salamati, Nagui Rouphail, H.C. Christopher Frey, Ana Bastos Silva, Emission Estimation at Multilane Roundabouts in Corridors, 10.º Encontro do Grupo de Estudos de Transportes, Alcobaça, January 2013.

8.      Tânia Fontes, Paulo Fernandes, Hugo Rodrigues, Jorge Bandeira, Sérgio Pereira, Margarida C. Coelho, Asad Khattak, Introduction of eco-lanes in a medium-sized city – Impact on Emissions, Atas do 10.º Encontro do Grupo de Estudos de Transportes, Alcobaça, January 2013.

9.      Castro, A., Flores, P., Completo, A., Alves, J., 2013. The role of poroelasticity on the biomechanics of the intervertebral disc: A finite element study. 5º Congresso Nacional de Biomecânica, IDMEC, Espinho, 8 a 9 de fevereiro, Livro de atas pp. 7-8 (ISBN978-989-96276-3-5)

10.  Pereira, J., Completo, A., Ramos, A., Relvas, C., Simões, J. 2013. Estudo do estímulo mecânico em construções celulares de agarose. 5º Congresso Nacional de Biomecânica, IDMEC, Espinho, 13 a 14 de fevereiro, Livro de atas pp. 7-8 (ISBN978-989-96276-3-5)

11.   Pereira, J., Completo, A.,, Ramos, A., Relvas, C., Simões, J. 2013. Articulação Radiocarpal – Estudo Numérico de um modelo específico de paciente. 5º Congresso Nacional de Biomecânica, IDMEC, Espinho, 8 a 9 de fevereiro, Livro de atas pp. 17-18 (ISBN978-989-96276-3-5)

12.  Cortez, S., Completo, A., Alves, J-L. 2013. From macro to subdomain modelling and numerical simulation of the biomechanical behavior of native cartilage. 5º Congresso Nacional de Biomecânica, IDMEC, Espinho, 8 a 9 de fevereiro, Livro de atas pp. 67-68 (ISBN978-989-96276-3-5)

13.  Duarte, R., Ramos, A., Mesnard, M., Marques, H., Relvas, C., Completo, A., Simões, J. 2013. Desenvolvimento de um simulador da articulação temporomandibular. 5º Congresso Nacional de Biomecânica, IDMEC, Espinho, 8 a 9 de fevereiro, Livro de atas pp. 113-114 (ISBN978-989-96276-3-5)

14.  Duarte, R., Ramos, A., Mesnard, M., Relvas, C., Completo A., Simões, J. 2013. Estudo Numérico da Fixação de Implante Temporomandibular, Influencia do número de parafusos. 5º Congresso Nacional de Biomecânica, IDMEC, Espinho, 8 a 9 de fevereiro , Livro de atas pp. 113-114 (ISBN978-989-96276-3-5)

15.  Rodrigues, F., Ramos, A., Duarte, R. J., Relvas, C., Completo, A., Simões, J. A. 2013. Comportamento Biomecânico do Pé Traumático Pré e Pós Ortótese Plantar. 5º Congresso Nacional de Biomecânica, IDMEC, Espinho, 8 a 9 de fevereiro, Livro de atas pp. 569-570  (ISBN978-989-96276-3-5)

16.  Ramos, A., Mesnard, M., Relvas, C., Completo, A., Simões, J. A. 2013. Influência da geometria do parafuso na transferência de carga na prótese TMJ, estudo numérico. 5º Congresso Nacional de Biomecânica, IDMEC, Espinho, 8 a 9 de fevereiro, Livro de atas pp. 591-592  (ISBN978-989-96276-3-5)

17.   Bola, M., Ramos, A., Relvas, C., Completo, A., Simões J.A. 2013. Estudo Numérico da Influencia da Resolução da TAC no Comportamento do Úmero. Um caso Clínico. 5º Congresso Nacional de Biomecânica, IDMEC, Espinho, 8 a 9 de fevereiro, Livro de atas pp. 659-660  (ISBN978-989-96276-3-5)

18.  Pereira J, Completo A., Ramos A., Relvas, C., Simões, J., 2013. “Estudo Biomecânico da artroplastia do punho”. XXXIII Congresso Nacional de Ortopedia e Traumatologia, Centro de Congressos do Algarve – Herdade dos salgados, Albufeira 31 de outubro a 2 de novembro, Livro de atas pp. - CL137 (p-121).

19.  Victor Neto, “Statistics Tools in Engineering - The Surface Roughness Evaluation and the Design of Experimental Planning”, 1st Workshop of Probability and Statistics Group - Interdisciplinarity and applications, May 15th 2013, Mathematics Department of the University of Aveiro.

20.  Paula AAP Marques, Interfacing graphene-based nanomaterials with health and environmental sciences, Workshop on graphene and other 2D materials: A roadmap for Portugal, Anfiteatro da Escola de Ciências, 18-06-2013, Braga University. PT

21.  Sandra M. A. Cruz, Helena I. S. Nogueira, and Paula A. A. P. Marques, Ag-PVA membranes as new active SERS substrates to detect nucleic acids, X CICECO Meeting, Aveiro, Portugal, April 18-19, 2013

22.  Sandra M. A. Cruz, Helena I. S. Nogueira, Paula A. A. P. Marques, Synthesis of graphene-based nanocomposites as SERS substrates in biodetection, XXIII Encontro Nacional da Sociedade Portuguesa de Química, Aveiro, Portugal, June 12-14, 2013

 

Relatórios

No reports published

 

Organização de Seminários e Conferências

1.      Plasticity 2013, Bahamas January 2013 http://goo.gl/xt8TzH

2.      ESAFORM 2013, Portugal, April 2013 http://esaform2013.com/

Educação

Teses de Douturamento

1.      André Paulo Galvão de Castro, Development of a Biomimetic FE Model to Study the InterVertebral Disc Diseases and Regeneration

2.      Branca Rosa Ribeiro Leite Sousa Sher, Passive damping treatments optimization using genetic algorithms

3.      Bruno Cardoso Lamas, Nanofluids development and characterization for heat exchanging intensification

4.      Cláudia Sofia de Andrade Redondo Murilhas Buchheim, Mechanical behavior of AlSiC nanocomposites produced by ball milling and spark plasma sintering http://hdl.handle.net/10773/11645

5.      Guilhermina Torrão, Effect of Vehicle Characteristics on Safety, Fuel Use and Emissions

6.      Hugo Miguel Filipe Calisto, Radiómetro por transpiração transitória - Desenvolvimento de um sensor de fluxo de calor para ambientes de elevada agressividade

7.      Joa~o Alexandre Dias Oliveira, Development of numerical and topological optimization methodologies in structural parallel calculations http://hdl.handle.net/10773/10675

8.      Jorge Bandeira, Road traffic information platform for energy and emissions savings

9.      Maria Margarida Fernandes Machado, A multibody approach to the contact dynamics: A knee joint application

10.  Miguel Armando Riem de Oliveira, Automatic information and safety systems for driving assistance http://hdl.handle.net/10773/10658

11.  Procópio Silveira Stein, Navigation in Dynamic Environments taking Advantage of Moving Agents

12.  Saeed Tamimi, Aumento da resistência mecânica e formabilidade do aço através da laminagem assimétrica

13.  Tatiana Ziltsova, Optimização de processos de moldarão para obtenção de peças microestruturadas

14.  Victor Manuel dos Santos Miranda, Experimental characterization and numerical modelling of metallic foams

Dissertações de Mestrado

Engenharia Mecânica

1.      André Matos da Silva, Desenvolvimento de um biciclo infantil de caracteristicas modulares (Orientador(es): Carlos Alberto Moura Relvas, António Manuel Amaral Monteiro Ramos)

2.      Bruno João Fonseca Barroqueiro, Modelação e análise numérica de tratamentos térmicos (Orientador(es): António Gil Campos, )

3.      Bruno Daniel Cordeiro Pereira, Análise e optimização de sistemas de abastecimento de água (Orientador(es): António Gil Campos, José Paulo Santos)

4.      Carlos Alberto Pinho Resende, Estudo da substituição óssea com cunhas e excertos no fémur na ATJ (Orientador(es): António Completo, Fernando Manuel Pereira Fonseca)

5.      Duarte Nuno Fernandes Garcia Lima, Controlo dinâmico ativo piezoelétrico de estruturas: atuação pulsada (Orientador(es): Rui Moreira, José Paulo Santos)

6.      Gustavo Kapusta, Estudo de revestimentos em materiais para dispositivos biomecânicos (Orientador(es): Victor Fernando Santos Neto, António Ramos e Ana Sofia C. M. d' Oliveira)

7.      João Alexandre David Fonseca e Bessa Carvalho, Sistema transfere de 3 eixos servomecanizados (Orientador(es): Francisco Queirós de Melo, António Silva Guedes)

8.      João Nuno Delgado Torrão, Controlo e execução de estampagem incremental com cinemática paralela (Orientador(es): Ricardo Sousa, Jorge Ferreira)

9.      José Fernando de Matos Pires, Modelação semi-empírica da secagem de bacalhau salgado verde (Orientador(es): Fernando José Neto da Silva, )

10.  José João Pereira Duarte, Controlo de tempertaura na artroplastia cimentada da anca (Orientador(es): António Completo, António Ramos)

11.  Marlene Liliana da Silva Airosa, Estudo da flexibilidade de tubos curvos sob momentos generalizados (Orientador(es): Francisco Queirós de Melo, )

12.  Paulo Ricardo Rosa Marcelo da Glória, Armazenamento de hidrogénio num aparelho Sievert com controlo térmico (Orientador(es): Duncan Paul Fagg, José António de la Torre)

13.  Pedro José Dias Moreira, Análise de vigas sandwich de alumínio-aglomerado de cortiça (Orientador(es): Francisco Queirós de Melo, Rui Moreira)

14.  Ricardo Filipe Dias Seara Afonso, Sistema de monitorização de dados de veículos (Orientador(es): José Paulo Santos, Margarida Coelho)

15.  Ricardo Miguel Santos Neta, Análise e simulação dum pistão automóvel sob diferentes condições (Orientador(es): Francisco Queirós de Melo, )

16.  André Cardoso de Melo, Estudo da flexibilidade em tubos curvos obtidos por gomos retos (Orientador(es): Francisco Queirós de Melo, )

17.  André Gomes Pinho, Modelação e otimização de ferramentas de conformação plástica de chapa (Orientador(es): António Gil Campos, Robertt Valente)

18.  André Lemos dos Santos, Cenários de tráfego em mesoescala: impacto nas emissões e consumos (Orientador(es): Margarida Coelho, Tânia Daniela Lopes da Rocha Fontes)

19.  Cátia Sofia Castanheira dos Santos, Análise do fluxo polimérico em micro cavidades revestidas com diamante (Orientador(es): Victor Fernando Santos Neto, Mónica Oliveira)

20.  César Filipe Duarte Cardoso, Controlo de acessos (Orientador(es): José Paulo Santos, )

21.  Daniel Rodrigues Jesus Fernandes, Estudo comparativo de geradores eletromagnéticos para prótese de anca (Orientador(es): Jorge Augusto Fernandes Ferreira, António Manuel Amaral Ramos)

22.  Diogo Dinis Grilo, Geração de energia a partir das ondas do mar (Orientador(es): José Paulo Santos, Francisco Queirós de Melo)

23.  Fábio Alexandre Teixeira Fernandes, Caracterização da transferência de calor em nanofluídos (Orientador(es): Maria Alexandra Lopes de Fonseca, Mónica Sandra Abrantes de Oliveira Correia)

24.  Fábio André Macedo Rodrigues, Comportamento biomecânico do pé traumático pré e pós ortótese plantar (Orientador(es): António Ramos, Carlos Alberto Moura Relvas)

25.  Fábio Ribeiro André, Projeto de estruturas tipo "sandwich" rígidas para prensas mecânicas (Orientador(es): Francisco Queirós de Melo, )

26.  Hugo Alexandre de Almeida Lourenço, Monitorização dos consumos de energia eléctrica (Orientador(es): José Paulo Santos, Nelson Martins)

27.  Jaime Tiago Almeida Araújo, Dispositivo de ensaio biaxial de provetes cruciformes (Orientador(es): António Bastos Pereira, Alfredo Balacó de Morais)

28.  João José Poito Coelho, Sistemas distribuídos para a monitorização em ambiente industrial (Orientador(es): José Paulo Santos, )

29.  José André Alves Sousa, Delaminagem à fadiga em modo I e II de laminados compósitos

30.  Melhoramento e testes de máquina de ensaios à fadiga (Orientador(es): António Bastos Pereira, Alfredo Balacó de Morais)

31.  Luís Filipe Coutinho da Silva, Estrutura de um torno com caixa de velocidades de seleção eletromagnética

32.  Estrutura de um torno de velocidades de seleção eletromagnética (Orientador(es): Francisco Queirós de Melo, )

33.  Marco Paulo Tavares de Matos, Percurso de um projecto no sector automóvel - caso de estudo (Orientador(es): Carlos Alberto Moura Relvas, António Manuel Amaral Ramos)

34.  Mário André Amaro Vasco, Análise energético-ambiental de rotundas (Orientador(es): Margarida Coelho, )

35.  Marlon Filipe Tavares da Seca, Caraterização de deformações em cascas cilíndricas sob esforços radiais

36.  Deformação em cascas cilíndricas sob esforços radiais (Orientador(es): Francisco Queirós de Melo, )

37.  Mauro Alexandre Nogueira Coutinho, Biomecânica da artroplastia e sua relação com o alinhamento protésico (Orientador(es): António Completo, )

38.  Pedro José Ramos Lopes, Aplicação de sensores FBG em moldes para microinjeção (Orientador(es): Vítor Fernando Santos Neto, Nélia Jordão Alberto e Joel Oliveira Correia Vasco)

39.  Pedro Miguel Baptista Teixeira, Materiais de mudança de fase em processos de aquecimento: propriedades (Orientador(es): Fernando Neto, )

40.  Ricardo da Cunha Norte Mendes, Materiais de mudança de fase para aquecimento em escoamentos laminares (Orientador(es): Fernando Neto, )

41.  Richard Daniel Carvalhais de Jesus, Cadeira para auxílio à mobilidade de pessoas séniores (Orientador(es): Francisco Queirós de Melo, Carlos Relvas)

42.  Rui Alexandre de Oliveira Pais, Pesagem e identificação automática no auxílio à agropecuária (Orientador(es): José Paulo Santos, )

43.  Rui Gabriel Lopes Bártolo, Integração de sistemas de rastreabilidade em ambiente industrial (Orientador(es): José Paulo Santos, )

44.  Rui Gabriel Ribeiro Margarido, O papel da mobilidade pedonal na eficiência energética (Orientador(es): Margarida Coelho, )

45.  Telmo Miguel Jorge Marques, Ensaio biaxial sob tensões normais (Orientador(es): António Bastos Pereira, Alfredo Balacó de Morais)

46.  Tiago Filipe Pereira Godinho, Regulação de energia produzida nas unidades de microgeração FV (Orientador(es): José Paulo Oliveira Santos, Joaquim José Borges Gouveia)

47.  Tiago Manuel Rodrigues Valente, Sensores sem fios (Orientador(es): José Paulo Santos, Fernando Neto)

 

Sistemas Energéeticos Sustentáveis

48.  Elena Casian, Recuperação de Energia em Processos de Incineração de Resíduos (Orientador(es): Manuel Arlindo Amador de Matos, Fernando José Neto da Silva)

49.  Mario Alejandro Heredia Salgado, Drying of biological sludges for combustion with energy recovery (Orientador(es): Luís António da Cruz Tarelho, Fernando José Neto da Silva)

 

Engenharia de Automação Industrial

50.  Ruben Gonçalves Brites, Sistema de monitorização e análise da rede eléctrica (Orientador(es): João Paulo Oliveira Santos, )

Engenharia e Design de Produto

51.  Henrique Abrantes Moreira Baptista da Cunha, Desenvolvimento e coceção de uma passadeira de manutenção (Orientador(es): António Completo, Francisco Maria Santarém)

 

Outros

No other training

 

Modelos

1.      RGVB – Microstructure-based model for the prediction of mechanical behavior of metals during linear and complex loading

2.      Softmar - A microstructure-based model for describing softening process during compression of Al-30%wt Zn alloy;

3.      MARISOL – A microstructure-based model for describing softening process during compression of Al-30%wt Zn alloy during Hot Pressure Torsion

4.      A crystallographic dislocation model for describing hardening of polycrystals during strain path changes.

5.      Integrated model of safety, energy and emissions domains.

 

Software

1.      Development of a computational tool towards the objective of assessing emission impacts of different routes.

 

Pilot plants

1.      Hydrogen-storage plant for the investigation of fuel cells

 

Protótipos

1.      Prototype for Incremental forming operations

2.      Equipment for bi-axial tensile tests

3.      Fatigue testing machine for composite laminates

 

Patentes

1.      Completo, A., Medes, A., 2013 – “Biorreator de estímulo para caracterização biomecânica de engenharia de tecidos”, Pedido de patente nacional INPI nº106827 J de 11 de março de 2013.

2.      Ramos, A and Mesnard, M., 2013, Registo de patente internacional/PCT, PROTHESE CONDYLIENNE POUR UNE ARTICULATION TEMPOROMANDIBULAIRE. http://patentscope.wipo.int/search/en/WO2014023903

3.      Ashok Kumar and Manoj Kumar Singh, US Patent Awarded on “Synthesis of Nanocrystalline Diamond Fibers” (Patent No.: US 8,404,313 B1; Date of Patent Awarded: Mar. 26, 2013)
última atualização a 20-12-2016
Este sítio web utiliza cookies sem recolher informação pessoal que permita a identificação dos utilizadores. Ao navegar neste sítio está a consentir a sua utilização.saber mais
Para que esta página funcione corretamente deve ativar a execução de Javascript. Se tal não for possível, algumas funcionalidades poderão estar limitadas.