44 anos da UA
via aberta

informação para...
 

Publicações 2017

Livros

Machado, C. and Davim, J.P., Productivity and organizational management, (2017), Productivity and Organizational Management, pp. 1-167.
Davim, J.P., Computational methods and production engineering: Research and development, (2017), Computational Methods and Production Engineering: Research and Development, pp. 1-228.
Machado, C.F. and Davim, J.P., Managing organizational diversity: Trends and challenges in management and engineering, (2017), Managing Organizational Diversity: Trends and Challenges in Management and Engineering, pp. 1-158, (DOI: 10.1007/978-3-319-54925-5).
Completo, A. and De Melo, F.Q., Introdução ao Projeto Mecânico (in portuguese), (2017), Engebook, Publindustria Editors, ISBN 9789897232251. Dixit, U.S., Hazarika, M. and Davim, J.P., A Brief History of Mechanical Engineering, Springer, (2017), Heidelberg, ISBN: 978-3-319-42916-8.
Ramos, A., Relvas, C., Simões, J.A. and Mota, L.M., Engenharia + Design: da ideia ao produto, (2017), editora Publindústria, ISBN: 9789897232398.
Relvas, C., Design & Engenharia: Da Ideia ao Produto, (2017), (eBook). Editora: PUBLINDUSTRIA, ISBN:9789897232404.
Davim, J.P., Sustainable Machining, (2017), Heidelberg: Springer, ISBN 978-3-319-51959-3, (DOI: 10.1007/978-3-319-51961-6).
Davim, J.P., Progress in Green Tribology, (2017), DE Gruyter, Berlin, ISBN: 978-3-11-036705-8.
De Sousa, R.A. and Anjos, O., Cork Science and its Applications, (2017), Materials Research Proceedings, Vol.3, Print ISBN 978-1-945291-40-1, ePDF ISBN 978-1-945291-41-8, (DOI: 10.21741/9781945291418).
Goncalves, G., Marques, P.A.A.P. and Vila, M., Graphene-based Materials in Health and Environment: New Paradigms, (2017), Springer, ISBN 978-3-319-45639-3, (DOI: 10.1007/978-3-319-45639-3).
Duarte, I., Peixinho, N., Andrade-Campos, A. and Valente, R., Cellular Materials: Structural Behaviour, (2017), Modelling and Characterisation, 101 pages. University of Aveiro, Aveiro, Portugal. ISBN 978-972-99784-5-6 (print version); ISBN978-972-99784-6-3 (electronic version).


Capítulos de Livros

Roy, S., Kumar, K. and Davim, J.P., Optimization of process parameters using soft computing techniques: A case with wire electrical discharge machining, (2017), Handbook of Research on Soft Computing and Nature-Inspired Algorithms, pp. 177-220, (DOI: 10.4018/978-1-5225-2128-0.ch006).
Gaitonde, V.N., Manjaiah, M., Maradi, S., Karnik, S.R., Petkar, P.M. and Davim, J.P., Multiresponse optimization in wire electric discharge machining (WEDM) of HCHCr steel by integrating response surface methodology (RSM) with differential evolution (DE), (2017), Computational Methods and Production Engineering: Research and Development, pp. 199-221, (DOI: 10.1016/B978-0-85709-481-0.00007-0).
Borodachenkova, M., Wen, W. and Pereira, A.B., (2017). High‐Pressure Torsion: Experiments and Modeling, Severe Plastic Deformation Techniques, Prof. Marcello Cabibbo (Ed.), InTech, (DOI: 10.5772/intechopen.69173).
Babu, J., Philip, J. and Davim, J.P., Machining defects in green composites, (2017), Chapter 4, (115-131), Green Composites, DE Gruyter, ISBN: 978-3-11-044194-9, (DOI: 10.1515/9783110435788-005).
Silibin, M.V., Bystrov, V.S., Karpinsky, D.V., Nasani, N., Goncalves, G., Sysa, A.V., Solnyshkin, A.V., Marques, P.A.A.P., Singh, B. and Bdikin, I.K., Piezoresponse force microscopy of p(VDF-TrFE)- graphene oxide films, (2017), Smart Materials for Smart Living, pp. 191-203.
Rai, R., Sharma, A., Bdikin, I., Valente, M.A. and Sharma, S., Ferrroelectric and ferromagnetic properties of BI1-X-YDYXCYFE1-YTIYO3 solid solution, (2017), Smart Materials for Smart Living, pp. 291-302.
Gabriel, B., Valente, R., Dias-de-Oliveira, J., Neto, V. and Andrade-Campos, A., Methodologies for Engineering Learning and Teaching (MELT): An Overview of Engineering Education in Europe and a Novel Concept for Young Students, Book chapter of the book: Handbook of Research on Entrepreneurial Development and Innovation within Smart Cities, 2017, Luisa Cagica Carvalho (Editor), Volume of the book series: Advances in Environmental Engineering and Green Technologies (AEEGT), IGI Global.
Sundar, L.S., Singh, M.K. and Sousa, A.C.M., Heat Transfer Augmentation with Nanocomposite Based Hybrid Nanofluids Flowing in a Tube with Inserts, (2017), (Book Title: Advances in Heat transfer Fluids: From Numerical to Experimental Techniques; Taylor and Francis Group, CRC Press) Published 21 March 2017, Imprint CRC Press, Pages 546 pages.
Macedo, E. and Tchemisova, T., A Generator of Nonregular Semidefinite Programming Problems, In: Vaz et al (eds.) Operational Research, Springer Proceedings in Mathematics & Statistics, Chapter 13, 2017. GRIDS
Maia, A., Ferreira, E., Oliveira, M.C., Menezes, L.F. and Andrade-Campos, A., Numerical optimization strategies for springback compensation in sheet metal forming, (2017), Computational Methods and Production Engineering: Research and Development, pp. 51-82, (DOI: 10.1016/B978-0-85709-481-0.00003-3).
Schicariol, S., Fonseca, M.A. and Neto, V., Development of a Nanopaint for Polymeric Auto Components, (2017), in book: Micro and Nanomanufacturing Volume II, (DOI 10.1007/978-3-319-67132-1_7).


Outras Publicações

Pereira, A.B., Gabriel, B., Completo, A., Valente, R. and Neto, V., Centre for Mechanical Technology and Automation, UA Editora, 2017. ISBN: 978-972-789-498-7.

Artigos


Santos, P.T., Pinto, S., Marques, P.A.A.P., Pereira, A.B. and de Sousa, R.J.A., Agglomerated cork: A way to tailor its mechanical properties, (2017), Composite Structures, 178, pp. 277-287, (DOI: 10.1016/j.compstruct.2017.07.035).
Xue, X., Pereira, A.B., Amorim, J. and Liao, J., Effects of pulsed Nd: YAG laser welding parameters on penetration and microstructure characterization of a DP1000 steel butt joint, (2017), Metals, 7 (8), 292, (DOI: 10.3390/met7080292).
Silva, D., Mendes, J.C., Pereira, A.B., Gégot, F. and Alves, L.N., Measuring torque and temperature in a rotating shaft using commercial saw sensors, (2017), Sensors (Switzerland), 17 (7), 1547, (DOI: 10.3390/s17071547).
Liao, J., Sousa, J.A., Lopes, A.B., Xue, X., Barlat, F. and Pereira, A.B., Mechanical, microstructural behavior and modelling of dual phase steels under complex deformation paths, (2017), International Journal of Plasticity, 93, pp. 269-290, (DOI: 10.1016/j.ijplas.2016.03.010).
Liao, J., Xue, X., Lee, M.-G., Barlat, F., Vincze, G. and Pereira, A.B., Constitutive modeling for path-dependent behavior and its influence on twist springback, (2017), International Journal of Plasticity, 93, pp. 64-88, (DOI: 10.1016/j.ijplas.2017.02.009).
Xue, X., Liao, J., Vincze, G. and Pereira, A.B., Control strategy of twist springback for aluminum alloy hybrid thin-walled tube under mandrel-rotary draw bending, (2017), International Journal of Material Forming, pp. 1-13, In Press, available online, (DOI: 10.1007/s12289-017-1346-7).
Ptak, M., Kaczynski, P., Fernandes, F.A.O. and de Sousa, R.J.A., Assessing impact velocity and temperature effects on crashworthiness properties of cork material, (2017), International Journal of Impact Engineering, 106, pp. 238-248, (DOI: 10.1016/j.ijimpeng.2017.04.014).
Vincze, G. and Barlat, F., In Memoriam: Professor José Joaquim de Almeida Grácio (1959–2014), (2017), International Journal of Material Forming, p. 1. In Press, available online, (DOI: 10.1007/s12289-017-1389-9).
Xue, X., Liao, J., Vincze, G. and Barlat, F., Twist springback characteristics of dual-phase steel sheet after non-axisymmetric deep drawing, (2017), International Journal of Material Forming, 10 (2), pp. 267-278, (DOI: 10.1007/s12289-015-1275-2). 
Pereira, R.B.D., Leite, R.R., Alvim, A.C., de Paiva, A.P., Balestrassi, P.P., Ferreira, J.R. and Davim, J.P., Multivariate robust modeling and optimization of cutting forces of the helical milling process of the aluminum alloy Al 7075, (2017), International Journal of Advanced Manufacturing Technology, pp. 1-25, In Press, available online, (DOI: 10.1007/s00170-017-1398-3).
Singh, R., Sharma, R. and Davim, J.P., Mechanical properties of bio compatible functional prototypes for joining applications in clinical dentistry, (2017), International Journal of Production Research, pp. 1-11, In Press, available online, (DOI: 10.1080/00207543.2017.1405167).
Niknam, S.A., Davoodi, B., Davim, J.P. and Songmene, V., Mechanical deburring and edge-finishing processes for aluminum parts —a review, (2017), International Journal of Advanced Manufacturing Technology, pp. 1-25 In Press, available online, (DOI: 10.1007/s00170-017-1288-8).
Rocha, L.C.S., de Paiva, A.P., Rotela Junior, P., Balestrassi, P.P., da Silva Campos, P.H. and Davim, J.P., Robust weighting applied to optimization of AISI H13 hardened-steel turning process with ceramic wiper tool: A diversity-based approach, (2017), Precision Engineering, 50, pp. 235-247, (DOI: 10.1016/j.precisioneng.2017.05.011).
Pereira, R.B.D., Brandão, L.C., de Paiva, A.P., Ferreira, J.R. and Davim, J.P., A review of helical milling process, (2017), International Journal of Machine Tools and Manufacture, 120, pp. 27-48, (DOI: 10.1016/j.ijmachtools.2017.05.002).
Pereira, R.B.D., Leite, R.R., Alvim, A.C., Paiva, A.P.D., Ferreira, J.R. and Davim, J.P., Multi-objective robust optimization of the sustainable helical milling process of the aluminum alloy Al 7075 using the augmented-enhanced normalized normal constraint method, (2017), Journal of Cleaner Production, 152, pp. 474-496, (DOI: 10.1016/j.jclepro.2017.03.121).
Dinaharan, I., Kalaiselvan, K., Akinlabi, E.T. and Davim, J.P., Microstructure and wear characterization of rice husk ash reinforced copper matrix composites prepared using friction stir processing, (2017), Journal of Alloys and Compounds, 718, pp. 150-160, (DOI: 10.1016/j.jallcom.2017.05.117).
Pillai, N., Karthikeyan, R. and Davim, J.P., A review on effects of cryogenic treatment of AISI 'D' series cold working tool steels, (2017), Reviews on Advanced Materials Science, 51 (2), pp. 149-159.
Carou, D., Rubio, E.M., Herrera, J., Lauro, C.H. and Davim, J.P., Latest advances in the micro-milling of titanium alloys: a review, (2017), Procedia Manufacturing, 13, pp. 275-282, (DOI: 10.1016/j.promfg.2017.09.071).
Shirvanimoghaddam, K., Hamim, S.U., Karbalaei Akbari, M., Fakhrhoseini, S.M., Khayyam, H., Pakseresht, A.H., Ghasali, E., Zabet, M., Munir, K.S., Jia, S., Davim, J.P. and Naebe, M., Carbon fiber reinforced metal matrix composites: Fabrication processes and properties, (2017), Composites Part A: Applied Science and Manufacturing, 92, pp. 70-96, (DOI: 10.1016/j.compositesa.2016.10.032).
Afonso, D., Alves de Sousa, R. and Torcato, R., Integration of design rules and process modelling within SPIF technology-a review on the industrial dissemination of single point incremental forming, (2017), International Journal of Advanced Manufacturing Technology, pp. 1-13, In Press, available online, (DOI: 10.1007/s00170-017-1130-3).
Fritzen, D., Daleffe, A., Do Santos de Lucca, G., Castelan, J., Schaeffer, L. and Alves de Sousa, R.J., Incremental forming of Cu-35Zn brass alloy, (2017), International Journal of Material Forming, pp. 1-16, In Press, available online, (DOI: 10.1007/s12289-017-1373-4).
Behera, A.K., de Sousa, R.A., Ingarao, G. and Oleksik, V., Single point incremental forming: An assessment of the progress and technology trends from 2005 to 2015, (2017), Journal of Manufacturing Processes, 27, pp. 37-62, (DOI: 10.1016/j.jmapro.2017.03.014).
Jeong, Y., Barlat, F., Tomé, C.N. and Wen, W., A comparative study between micro- and macro-mechanical constitutive models developed for complex loading scenarios, (2017), International Journal of Plasticity, 93, pp. 212-228, (DOI: 10.1016/j.ijplas.2016.07.015).
Fetene, B.N., Uday S. Dixit and Davim, J.P., Laser-assisted bending by magnetic force, (2017), The Journal of Engineering, (DOI: 10.1049/joe.2017.0145).
Ptak, M., Kaczyński, P., Fernandes, F. and de Sousa, R.A., Computer simulations for head injuries verification after impact, (2017), Lecture Notes in Mechanical Engineering, Part F10, Proceedings of the 13th International Scientific Conference: Computer Aided Engineering, Springer pp. 431-440, (DOI: 10.1007/978-3-319-50938-9_45).
Pan, J.-Y. and Xue, X., Numerical investigation of an arc inlet structure extrusion die for large hollow sections, (2017), International Journal of Material Forming, pp. 1-12, In Press, available online, (DOI: 10.1007/s12289-017-1374-3). 
Yang, T., Shaula, A., Pukazhselvan, D., Ramasamy, D., Deng, J., da Silva, E.L., Duarte, R. and Saraiva, J.A., Bias polarization study of steam electrolysis by composite oxygen electrode Ba0.5Sr0.5Co0.8Fe0.2O3-δ/BaCe0.4Zr0.4Y0.2O3-δ, (2017), Applied Surface Science, 424, pp. 82-86, (DOI: 10.1016/j.apsusc.2017.02.080).
Nasani, N., Pukazhselvan, D., Kovalevsky, A.V., Shaula, A.L. and Fagg, D.P., Conductivity recovery by redox cycling of yttrium doped barium zirconate proton conductors and exsolution of Ni-based sintering additives, (2017), Journal of Power Sources, 339, pp. 93-102, (DOI: 10.1016/j.jpowsour.2016.11.036).
Ehtiwesh, I.A.S. and Sousa, A.C.M., Numerical model for the thermal behavior of thermocline storage tanks, (2017), Heat and Mass Transfer / Waerme- und Stoffuebertragung, pp. 1-9, In Press, available online, (DOI: 10.1007/s00231-017-2181-6).
Syam Sundar, L., Singh, M.K., Ferro, M.C. and Sousa, A.C.M., Experimental investigation of the thermal transport properties of graphene oxide/Co3O4 hybrid nanofluids, (2017), International Communications in Heat and Mass Transfer, 84, pp. 1-10, (DOI: 10.1016/j.icheatmasstransfer.2017.03.001).
Sundar, L.S., Sharma, K.V., Singh, M.K. and Sousa, A.C.M., Hybrid nanofluids preparation, thermal properties, heat transfer and friction factor – A review, (2017), Renewable and Sustainable Energy Reviews, 68, pp. 185-198, (DOI: 10.1016/j.rser.2016.09.108).
Ravi Kumar, N.T., Bhramara, P., Addis, B.M., Sundar, L.S., Singh, M.K. and Sousa, A.C.M., Heat transfer, friction factor and effectiveness analysis of Fe3O4/water nanofluid flow in a double pipe heat exchanger with return bend, (2017), International Communications in Heat and Mass Transfer, 81, pp. 155-163, (DOI: 10.1016/j.icheatmasstransfer.2016.12.019).
Syam Sundar, L., Bhramara, P., Ravi Kumar, N.T., Singh, M.K. and Sousa, A.C.M., Experimental heat transfer, friction factor and effectiveness analysis of Fe3O4 nanofluid flow in a horizontal plain tube with return bend and wire coil inserts, (2017), International Journal of Heat and Mass Transfer, 109, pp. 440-453, (DOI: 10.1016/j.ijheatmasstransfer.2017.02.022).
Ravi Kumar, N.T., Bhramara, P., Sundar, L.S., Singh, M.K. and Sousa, A.C.M., Heat transfer, friction factor and effectiveness of Fe3O4 nanofluid flow in an inner tube of double pipe U-bend heat exchanger with and without longitudinal strip inserts, (2017), Experimental Thermal and Fluid Science, 85, pp. 331-343, (DOI: 10.1016/j.expthermflusci.2017.03.019).
Nasani, N., Oliveira Rocha, C.M., Kovalevsky, A.V., Otero Irurueta, G., Populoh, S., Thiel, P., Weidenkaff, A., Neto da Silva, F. and Fagg, D.P., Exploring the Thermoelectric Performance of BaGd2NiO5 Haldane Gap Materials, (2017), Inorganic Chemistry, 56 (4), pp. 2354-2362, (DOI: 10.1021/acs.inorgchem.7b00049).
Merkulov, O.V., Naumovich, E.N., Patrakeev, M.V., Markov, A.A., Shalaeva, E.V., Kharton, V.V., Tsipis, E.V., Waerenborgh, J.C., Leonidov, I.A. and Kozhevnikov, V.L., Defect formation, ordering, and transport in SrFe1–xSixO3–δ (x = 0.05–0.20), (2017), Journal of Solid State Electrochemistry, pp. 1-11, In Press, available online, (DOI: 10.1007/s10008-017-3797-7).
Tsipis, E.V., Waerenborgh, J.C. and Kharton, V.V., Grain-boundary states in solid oxide electrolyte ceramics processed using iron oxide sintering aids: a Mössbauer spectroscopy study, (2017), Journal of Solid State Electrochemistry, 21 (10), pp. 2965-2974, (DOI: 10.1007/s10008-017-3622-3).
Lopes, M.A.R., Antunes, C.H., Reis, A. and Martins, N., Estimating energy savings from behaviours using building performance simulations, (2017), Building Research and Information, 45 (3), pp. 303-319, (DOI: 10.1080/09613218.2016.1140000).
Santos, T., Amaral, J.S., Costa, V.A.F. and Amaral, V.S., Thermal Conductivity of Agglomerate Cork, (2017), Materials Research Proceedings, 3, pp. 1-10, (DOI: 10.21741/9781945291418-1).
Sundar, L.S., Singh, M.K. and Sousa, A.C.M., Turbulent heat transfer and friction factor of nanodiamond-nickel hybrid nanofluids flow in a tube: An experimental study, (2017), International Journal in Heat and Mass Transfer, 117, 2018, pp. 223-234, (DOI: 10.1016/j.ijheatmasstransfer.2017.09.109).
Sundar, L.S., Singh, M.K., Punnaiah, V. and Sousa, A.C.M., Experimental Investigation of Al2O3/Water Nanofluid on the Effectiveness of Solar Flat-Plate Collectors with and without Twisted Tape Inserts, (2018), Renewable Energy, RENE-D-17-02607R3 (published online), (DOI: 10.1016/j.renene.2017.10.056). 
Completo, A., Pereira, J., Nascimento, A. and Almeida, F., Strain shielding in distal radius after wrist arthroplasty with a current generation implant: An in vitro analysis, (2017), Journal of Biomechanics, 52, pp. 169-175, (DOI: 10.1016/j.jbiomech.2016.12.011).
Cortez, S., Freitas, F.L., Completo, A. and Alves, J.L., A 3D finite element model to predict the arcade-like collagen structure in a layered PCL scaffold for cartilage tissue engineering, (2017), Computer Methods in Biomechanics and Biomedical Engineering, 20, pp. 47-48, (DOI: 10.1080/10255842.2017.1382854).
Completo, A., Fonseca, F., Ramos, A. and Simões, J., Comparative assessment of different reconstructive techniques of distal femur in revision total knee arthroplasty, (2017), Knee Surgery, Sports Traumatology, Arthroscopy, 25 (8), pp. 2559-2566, (DOI: 10.1007/s00167-015-3652-2).
Completo, A., Bandeiras, C. and Fonseca, F., Comparative assessment of intrinsic mechanical stimuli on knee cartilage and compressed agarose constructs, (2017), Medical Engineering and Physics, 44, pp. 87-93, (DOI: 10.1016/j.medengphy.2017.02.013).
Bandeiras, C. and Completo, A., A mathematical model of tissue-engineered cartilage development under cyclic compressive loading, (2017), Biomechanics and Modeling in Mechanobiology, 16 (2), pp. 651-666, (DOI: 10.1007/s10237-016-0843-9).
Ferreira, F.M., Simamoto-Júnior, P.C., Soares, C.J., Ramos, A.M.A.M. and Fernandes-Neto, A.J., Effect of occlusal splints on the stress distribution on the temporomandibular joint disc, (2017), Brazilian Dental Journal, 28 (3), pp. 324-329, (DOI: 10.1590/0103-6440201601459).
Ramos, A., Nyashin, Y. and Mesnard, M., Influences of geometrical and mechanical properties of bone tissues in mandible behaviour–experimental and numerical predictions, (2017), Computer Methods in Biomechanics and Biomedical Engineering, 20 (9), pp. 1004-1014, (DOI: 10.1080/10255842.2017.1322072). 
Zeng, A., Shrestha, M., Wang, K., Neto, V.F., Gabriel, B. and Fan, Q.H., Plasma Treated Active Carbon for Capacitive Deionization of Saline Water, (2017), Journal of Nanomaterials, 1934724, (DOI: 10.1155/2017/1934724).
Silibin, M.V., Bystrov, V.S., Karpinsky, D.V., Nasani, N., Goncalves, G., Gavrilin, I.M., Solnyshkin, A.V., Marques, P.A.A.P., Singh, B. and Bdikin, I.K., Local mechanical and electromechanical properties of the P(VDF-TrFE)-graphene oxide thin films, (2017), Applied Surface Science, 421, pp. 42-51, (DOI: 10.1016/j.apsusc.2017.01.291).
Pukazhselvan, D., Nasani, N., Sandhya, K.S., Singh, B., Bdikin, I., Koga, N. and Fagg, D.P., Role of chemical interaction between MgH2 and TiO2 additive on the hydrogen storage behavior of MgH2, (2017), Applied Surface Science, 420, pp. 740-745, (DOI: 10.1016/j.apsusc.2017.05.182).
Rathee, S.P., Dhas, S.A.M.B., Singh, B., Bdikin, I. and Ahlawat, D.S., Investigations on crystal perfection, mechanical and thermo-electric properties of L-ornithine mono-hydrochloride single crystal: A promising material for nonlinear optical applications, (2017), Materials Chemistry and Physics, 200, pp. 376-383, (DOI: 10.1016/j.matchemphys.2017.08.004).
Goel, S., Yadav, H., Sinha, N., Singh, B., Bdikin, I., Rao, D.C., Gopalaiah, K. and Kumar, B., An insight into the synthesis, crystal structure, geometrical modelling of crystal morphology, Hirshfeld surface analysis and characterization of N-(4-methylbenzyl) benzamide single crystals, (2017), Journal of Applied Crystallography, 50 (5), pp. 1498-1511, (DOI: 10.1107/S1600576717012316).
Kaushal, A., Olhero, S.M., Singh, B., Bhardwaj, C., Sharma, I., Bdikin, I., Button, T. and Ferreira, J.M.F., 3D multiscale controlled micropatterning of lead-free piezoelectric electroceramics via Epoxy Gel Casting and lift-off, (2017), Journal of the European Ceramic Society, 37 (9), pp. 3079-3087, (DOI: 10.1016/j.jeurceramsoc.2017.03.037).
Yadav, H., Sinha, N., Goel, S., Singh, B., Bdikin, I., Saini, A., Gopalaiah, K. and Kumar, B., Growth, crystal structure, Hirshfeld surface, optical, piezoelectric, dielectric and mechanical properties of bis (l-Asparaginium hydrogensquarate) single crystal, (2017), Acta Crystallographica Section B: Structural Science, Crystal Engineering and Materials, 73 (3), pp. 347-359, (DOI: 10.1107/S2052520617002906).
Zamiri, R., Kaushal, A., Rebelo, A., Singh, B., Bdikin, I., Shabani, M. and Ferreira, J.M.F., Enhanced local piezoelectric response in the erbium-doped ZnO nanostructures prepared by wet chemical synthesis, (2017), Journal of Asian Ceramic Societies, 5 (1), pp. 1-6, (DOI: 10.1016/j.jascer.2016.10.002).
Krishna, A., Sonia, Vijayan, N., Verma, S., Singh, B., Bidkin, I., Jayalakshmy, M.S., Sridhar, B. and Das, S., Crystalline perfection, thermal, mechanical and optical investigations on solution grown l-arginine monohydrochloride single crystal, (2017), Journal of Materials Science: Materials in Electronics, 28 (5), pp. 4306-4312, (DOI: 10.1007/s10854-016-6054-4).
Krishna, A., Vijayan, N., Sonia, Vij, M., Sridhar, B., Soumya, H., Singh, B., Das, S. and Maurya, K.K., An in-depth study into the growth aspects and characteristic properties of ethyl 4-amino benzoate: A potential candidate for electro-optical applications, (2017), New Journal of Chemistry, 41 (19), pp. 10908-10918, (DOI: 10.1039/c7nj02137b).
Pukazhselvan, D., Selvaraj, N.B., Bdikin, I., Saravanan, R.S.S., Jakka, S.K., Soares, M.J. and Fagg, D.P., Unique dielectric features of a ceramic-semiconductor nanocomposite MgNb2O6 + 0.25Zn0.5Cd0.5S, (2017), Applied Surface Science, 424, pp. 127-131, (DOI: 10.1016/j.apsusc.2017.01.124).
Antunes, I., Amador, U., Alves, A., Correia, M.R., Ritter, C., Frade, J.R., Pérez-Coll, D., Mather, G.C. and Fagg, D.P., Structure and Electrical-Transport Relations in Ba(Zr,Pr)O3-δ Perovskites, (2017), Inorganic Chemistry, 56 (15), pp. 9120-9131, (DOI: 10.1021/acs.inorgchem.7b01128).
Ferreira, N.M., Ferro, M.C., Fagg, D.P., Costa, F.M., Frade, J.R. and Kovalevsky, A.V., Exploring the effects of silica and zirconia additives on electrical and redox properties of ferrospinels, (2017), Journal of the European Ceramic Society, 37 (7), pp. 2621-2628, (DOI: 10.1016/j.jeurceramsoc.2017.02.037).
Sousa, A.R.O., Araujo, A.J.M., Souza, G.S., Grilo, J.P.F., Loureiro, F.J.A., Fagg, D.P. and Macedo, D.A., Electrochemical assessment of one-step Cu-CGO cermets under hydrogen and biogas fuels, (2017), Materials Letters, 191, pp. 141-144, (DOI: 10.1016/j.matlet.2016.12.087).
Pukazhselvan, D., Nasani, N., Yang, T., Bdikin, I., Kovalevsky, A.V. and Fagg, D.P., Dehydrogenation Properties of Magnesium Hydride Loaded with Fe, Fe−C, and Fe−Mg Additives, (2017), ChemPhysChem, 18 (3), pp. 287-291, (DOI: 10.1002/cphc.201601078).
Santos, T.H., Grilo, J.P.F., Loureiro, F.J.A., Fagg, D.P., Fonseca, F.C. and Macedo, D.A., Structure, densification and electrical properties of Gd3+ and Cu2+ co-doped ceria solid electrolytes for SOFC applications: Effects of Gd2O3 content, (2017), Ceramics International, In Press, available online, (DOI: 10.1016/j.ceramint.2017.11.009).
Pukazhselvan, D., Nasani, N., Correia, P., Carbó-Argibay, E., Otero-Irurueta, G., Stroppa, D.G. and Fagg, D.P., Evolution of reduced Ti containing phase(s) in MgH2/TiO2 system and its effect on the hydrogen storage behavior of MgH2, (2017), Journal of Power Sources, 362, pp. 174-183, (DOI: 10.1016/j.jpowsour.2017.07.032).
Kovalevsky, A.V., Aguirre, M.H., Populoh, S., Patrício, S.G., Ferreira, N.M., Mikhalev, S.M., Fagg, D.P., Weidenkaff, A. and Frade, J.R., Designing strontium titanate-based thermoelectrics: insight into defect chemistry mechanisms, (2017), Journal of Materials Chemistry A, 5 (8), pp. 3909-3922, (DOI: 10.1039/c6ta09860f).
Krishna, R. and Titus, E., Nickel induced re-structuring of 2D graphene to 1D graphene nanotubes: Role of radical hydrogen in catalyst assisted growth, (2017), Applied Surface Science, 424, pp. 87-92, (DOI: 10.1016/j.apsusc.2017.02.060).
Konda, R., Deshmukh, A., Titus, E. and Chaudhari, A., Alkali, alkaline earth and transition metal doped B6H6 complexes for hydrogen storage, (2017), International Journal of Hydrogen Energy, 42 (37), pp. 23723-23730, (DOI: 10.1016/j.ijhydene.2017.05.023).
Deshmukh, A., Konda, R., Titus, E. and Chaudhari, A., Electronic structure calculations and molecular dynamics simulations of hydrogen adsorption on Beryllium doped complexes, (2017), International Journal of Hydrogen Energy, 42 (37), pp. 23708-23715, (DOI: 10.1016/j.ijhydene.2017.02.118).
Krishna, R., Fernandes, D.M., Marinoiu, A., Ventura, J., Freire, C. and Titus, E., Facile synthesis of well dispersed Pd nanoparticles on reduced graphene oxide for electrocatalytic oxidation of formic acid, (2017), International Journal of Hydrogen Energy, 42 (37), pp. 23639-23646, (DOI: 10.1016/j.ijhydene.2017.04.263).
Kalamse, V., Tavhare, P., Deshmukh, A., Krishna, R., Titus, E. and Chaudhari, A., Effect of boron substitution on hydrogen storage capacity of Li and Ti decorated naphthalene, (2017), International Journal of Hydrogen Energy, 42 (37), pp. 23716-23722, (DOI: 10.1016/j.ijhydene.2017.02.107).
Bystrov, V.S., Bdikin, I.K., Silibin, M., Karpinsky, D., Kopyl, S., Paramonova, E.V. and Goncalves, G., Molecular modeling of the piezoelectric properties of ferroelectric composites containing polyvinylidene fluoride (PVDF) and either graphene or graphene oxide, (2017), Journal of Molecular Modeling, 23 (4), 128, (DOI: 10.1007/s00894-017-3291-2).
Bystrov, V.S., Bdikin, I.K., Silibin, M.V., Karpinsky, D.V., Kopyl, S.A., Goncalves, G., Sapronova, A.V., Kuznetsova, T. and Bystrova, V.V., Graphene/graphene oxide and polyvinylidene fluoride polymer ferroelectric composites for multifunctional applications, (2017), Ferroelectrics, 509 (1), pp. 124-142, (DOI: 10.1080/00150193.2017.1295745).
Bdikin, I., Sharma, D.K., Otero-Irurueta, G., Hortigüela, M.J., Tyagi, P.K., Neto, V. and Singh, M.K., Charge injection in large area multilayer graphene by ambient Kelvin probe force microscopy, (2017), Applied Materials Today, 8, pp. 18-25, (DOI: 10.1016/j.apmt.2016.11.005).
Sharma, D.K., Fateixa, S., Hortigüela, M.J., Vidyasagar, R., Otero-Irurueta, G., Nogueira, H.I.S., Singh, M.K. and Kholkin, A., Defect concentration in nitrogen-doped graphene grown on Cu substrate: A thickness effect, (2017), Physica B: Condensed Matter, 513, pp. 62-68, (DOI: 10.1016/j.physb.2017.03.004).
Sousa, M.G., da Cunha, A.F., Teixeira, J.P., Leitão, J.P., Otero-Irurueta, G. and Singh, M.K., Optimization of post-deposition annealing in Cu2ZnSnS4 thin film solar cells and its impact on device performance, (2017), Solar Energy Materials and Solar Cells, 170, pp. 287-294, (DOI: 10.1016/j.solmat.2017.05.065).
Syam Sundar, L., Anjum, N.A., Ferro, M.C., Pereira, E., Singh, M.K. and Sousa, A.C.M., Biocompatibility and biotoxicity of in-situ synthesized carboxylated nanodiamond-cobalt oxide nanocomposite, (2017), Journal of Materials Science and Technology, 33 (8), pp. 879-888, (DOI: 10.1016/j.jmst.2017.03.016).
Kumari, R., Singh, A., Yadav, B.S., Mohapatra, D.R., Ghosh, A., Guha, P., Satyam, P.V., Singh, M.K. and Tyagi, P.K., Filled-carbon nanotubes: 1 D nanomagnets possessing uniaxial magnetization axis and reversal magnetization switching, (2017), Carbon, 119, pp. 464-475, (DOI: 10.1016/j.carbon.2017.04.053).
Tobaldi, D.M., Hortigüela Gallo, M.J., Otero-Irurueta, G., Singh, M.K., Pullar, R.C., Seabra, M.P. and Labrincha, J.A., Purely Visible-Light-Induced Photochromism in Ag-TiO2 Nanoheterostructures, (2017), Langmuir, 33 (20), pp. 4890-4902, (DOI: 10.1021/acs.langmuir.6b04474).
Ramana, E.V., Prasad, N.V., Tobaldi, D.M., Zavašnik, J., Singh, M.K., Hortigüela, M.J., Seabra, M.P., Prasad, G. and Valente, M.A., Effect of samarium and vanadium co-doping on structure, ferroelectric and photocatalytic properties of bismuth titanate, (2017), RSC Advances, 7 (16), pp. 9680-9692, (DOI: 10.1039/c7ra00021a).
Cicuéndez, M., Silva, V.S., Hortigüela, M.J., Matesanz, M.C., Vila, M. and Portolés, M.T., MC3T3-E1 pre-osteoblast response and differentiation after graphene oxide nanosheet uptake, (2017), Colloids and Surfaces B: Biointerfaces, 158, pp. 33-40, (DOI: 10.1016/j.colsurfb.2017.06.019).
Ayán-Varela, M., Pérez-Vidal, O., Paredes, J.I., Munuera, J.M., Villar-Rodil, S., Díaz-González, M., Fernández-Sánchez, C., Silva, V.S., Cicuéndez, M., Vila, M., Martínez-Alonso, A. and Tascón, J.M.D., Aqueous exfoliation of transition metal dichalcogenides assisted by DNA/RNA nucleotides: Catalytically active and biocompatible nanosheets stabilized by acid-base interactions, (2017), ACS Applied Materials and Interfaces, 9 (3), pp. 2835-2845, (DOI: 10.1021/acsami.6b13619).
Santos, N.F., Cicuendez, M., Holz, T., Silva, V.S., Fernandes, A.J.S., Vila, M. and Costa, F.M., Diamond-graphite nanoplatelet surfaces as conductive substrates for the electrical stimulation of cell functions, (2017), ACS Applied Materials and Interfaces, 9 (2), pp. 1331-1342, (DOI: 10.1021/acsami.6b14407).
Alberto, N., Fonseca, M.A., Neto, V., Nogueira, R., Oliveira, M. and Moreira, R., Incorporation of fiber bragg sensors for shape memory polyurethanes characterization, (2017), Sensors (Switzerland), 17 (11), 2600, (DOI: 10.3390/s17112600).
Díaz, C.A.R., Leitão, C., Marques, C.A., Domingues, M.F., Alberto, N., Pontes, M.J., Frizera, A., Ribeiro, M.R.N., André, P.S.B. and Antunes, P.F.C., Low-cost interrogation technique for dynamic measurements with FBG-based devices, (2017), Sensors (Switzerland), 17 (10), 2414, (DOI: 10.3390/s17102414).
Domingues, M.F., Tavares, C., Leitão, C., Frizera-Neto, A., Alberto, N., Marques, C., Radwan, A., Rodriguez, J., Postolache, O., Rocon, E., André, P. and Antunes, P., Insole optical fiber Bragg grating sensors network for dynamic vertical force monitoring, (2017), Journal of Biomedical Optics, 22 (9), 091507, (DOI: 10.1117/1.JBO.22.9.091507).
Domingues, M.F., Alberto, N., Leitao, C., Tavares, C., de Lima, E.R., Radwan, A., Sucasas, V., Rodriguez, J., Andre, P. and Antunes, P., Insole optical fiber sensor architecturefor remote gait analysis - an eHealth Solution, (2017), IEEE Internet of Things Journal, In Press, available online, (DOI: 10.1109/JIOT.2017.2723263).
Alberto, N., Kalinowski, H.J., Neto, V. and Nogueira, R., Diamond-coated fiber Bragg grating through the hot filament chemical vapor process for chemical durability improvement, (2017), Applied Optics, 56 (6), pp. 1603-1609, (DOI: 10.1364/AO.56.001603).
Tkach, A., Okhay, O., Almeida, A. and Vilarinho, P.M., Giant dielectric permittivity and high tunability in Y-doped SrTiO3 ceramics tailored by sintering atmosphere, (2017), Acta Materialia, 130, pp. 249-260, (DOI: 10.1016/j.actamat.2017.03.051).
Pinto, R.J.B., Lucas, J.M.F., Morais, M.P., Santos, S.A.O., Silvestre, A.J.D., Marques, P.A.A.P. and Freire, C.S.R., Demystifying the morphology and size control on the biosynthesis of gold nanoparticles using Eucalyptus globulus bark extract, (2017), Industrial Crops and Products, 105, pp. 83-92, (DOI: 10.1016/j.indcrop.2017.05.003).
Amaral, C., Vicente, R., Marques, P.A.A.P. and Barros-Timmons, A., Phase change materials and carbon nanostructures for thermal energy storage: A literature review, (2017), Renewable and Sustainable Energy Reviews, 79, pp. 1212-1228, (DOI: 10.1016/j.rser.2017.05.093).
De Marchi, L., Neto, V., Pretti, C., Figueira, E., Brambilla, L., Rodriguez-Douton, M.J., Rossella, F., Tommasini, M., Furtado, C., Soares, A.M.V.M. and Freitas, R., Physiological and biochemical impacts of graphene oxide in polychaetes: The case of Diopatra neapolitana, (2017), Comparative Biochemistry and Physiology Part - C: Toxicology and Pharmacology, 193, pp. 50-60, (DOI: 10.1016/j.cbpc.2017.01.005).
De Marchi, L., Neto, V., Pretti, C., Figueira, E., Chiellini, F., Soares, A.M.V.M. and Freitas, R., The impacts of emergent pollutants on Ruditapes philippinarum: biochemical responses to carbon nanoparticles exposure, (2017), Aquatic Toxicology, 187, pp. 38-47, (DOI: 10.1016/j.aquatox.2017.03.010).
De Marchi, L., Neto, V., Pretti, C., Figueira, E., Chiellini, F., Soares, A.M.V.M. and Freitas, R., Physiological and biochemical responses of two keystone polychaete species: Diopatra neapolitana and Hediste diversicolor to Multi-walled carbon nanotubes, (2017), Environmental Research, 154, pp. 126-138, (DOI: 10.1016/j.envres.2016.12.018).
De Marchi, L., Neto, V., Pretti, C., Figueira, E., Chiellini, F., Morelli, A., Soares, A.M.V.M. and Freitas, R., The impacts of seawater acidification on: Ruditapes philippinarum sensitivity to carbon nanoparticles, (2017), Environmental Science: Nano, 4 (8), pp. 1692-1704, (DOI: 10.1039/c7en00335h).
De Marchi, L., Neto, V., Pretti, C., Figueira, E., Chiellini, F., Morelli, A., Soares, A.M.V.M. and Freitas, R., Toxic effects of multi-walled carbon nanotubes on bivalves: Comparison between functionalized and nonfunctionalized nanoparticles, (2017), Science of the Total Environment, In Press, (DOI: 10.1016/j.scitotenv.2017.10.031).
Qu, J., Wang, W., Yang, T., Chen, Y. and Shao, Z., One-pot synthesis of silver-modified sulfur-tolerant anode for SOFCs with an expanded operation temperature window, (2017), AIChE Journal, 63 (10), pp. 4287-4295, (DOI: 10.1002/aic.15649).
V., K., Prakash, S., Rajesh, R., Rammasamy, D., Selvaraj, N.B., Yang, T., Prabakaran, B. and Jothi, S., Electrodeposition of r-GO/SiC nano-composites on Magnesium and its Corrosion Behavior in Aqueous Electrolyte, (2017), Applied Surface Science, 424, pp. 63-71, (DOI: 10.1016/j.apsusc.2017.02.082).
Wang, Z., Liu, Y., Yang, T., Deng, J., Xie, S. and Dai, H., Catalytic performance of cobalt oxide-supported gold-palladium nanocatalysts for the removal of toluene and oxylene, (2017), Cuihua Xuebao/Chinese Journal of Catalysis, 38(2), pp. 207-216, (DOI: 10.1016/S1872-2067(16)62569-X).
Thankachan, T., Prakash, K.S., David Pleass, C., Rammasamy, D., Prabakaran, B. and Jothi, S., Artificial neural network to predict the degraded mechanical properties of metallic materials due to the presence of hydrogen, (2017), International Journal of Hydrogen Energy, 42(47), pp. 28612-28621, (DOI: 10.1016/j.ijhydene.2017.09.149).
Sonia, Vijayan, N., Vij, Mahak, Kumar, Prashant, Singh, Budhendra, Das, Subhasis, Rajnikant and Soumya H., Assessment of the imperative features of an l-arginine 4-nitrophenolate 4-nitrophenol dihydrate single crystal for nonlinear optical applications, (2017), Mater. Chem. Front., 1, pp. 1107-1117, (DOI: 10.1039/C6QM00217J).
Mukherjee, D., Polini, R., Valentini, V., Rotter, S.Z. and Mendes, J.C., HFCVD nanostructured diamond films deposited by a combination of seeding suspensions and novel nucleation process, (2017), International Journal of Surface Science and Engineering, 11 (3), pp. 225-240, (DOI: 10.1504/IJSURFSE.2017.085622).
C. Amaral, R. Vicente, J. Eisenblätter and P.A.A.P. Marques, Thermal characterization of polyurethane foams with phase change material, (2017), Ciência & Tecnologia dos Materiais, 29(2), pp. 1-7, (DOI: 10.1016/j.ctmat.2016.06.015).
Cruz, S.M.A. and Marques, J.M.C., Low-energy structures of clusters modeled with competing repulsive and either long- or moderate short-range attractive interactions, (2017), Computational and Theoretical Chemistry, 1107, pp. 82-93, (DOI: 10.1016/j.comptc.2017.01.035).
Xia, Y., Xia, L., Liu, Y., Yang, T., Deng, J. and Dai, H., Concurrent catalytic removal of typical volatile organic compound mixtures over Au-Pd/α-MnO2 nanotubes, (2017), Journal of Environmental Sciences, available online, (DOI: 10.1016/j.jes.2017.06.025).
Azpeitia, J., Otero-Irurueta, G., Palacio, I., Martinez, J.I., Ruiz del Árbol, N., Santoro, G., Gutierrez, A., Aballe, L., Foerster, M., Kalbac, M., Vales, V., Mompeán, F.J., García-Hernández, M., Martín-Gago, J.A. and López, M.F., High-quality PVD graphene growth by fullerene decomposition on Cu foils, (2017), Carbon, 119, pp. 535–543, (DOI: 10.1016/j.carbon.2017.04.067).
Krishna, R. and Titus, E, Ni nanoparticles intercalated LTA-type nanozeolite (KZ) supported on reduced graphene oxide for 4-nitrophenol reduction, (2017), International Journal of Hydrogen Energy, vol. 42, ed. 37, pp. 23664-23669, (DOI: 10.1016/j.ijhydene.2017.04.262).
Mukherjee, D., Polini, M.F., Valentini, V., Rotter, S.Z. and Mendes, J.C., HFCVD nanostructured diamond films deposited by a combination of seeding suspensions and novel nucleation process, (2017), Int. J. of Surface Science and Engineering, Vol.11, No.3, pp.225 – 240, (DOI: 10.1504/IJSURFSE.2017.10006721).
Fernandes, P., Rouphail, N.M., and Coelho, M.C., Turbo-Roundabouts Along Corridors: Analysis of Operational and Environmental Impacts, (2017), Transportation Research Record, No. 2627, pp. 46-56, (DOI: 10.3141/2627-06).
Fernandes, P., Coelho, M.C. and Rouphail, N.M. Assessing the impact of closely-spaced intersections on traffic operations and pollutant emissions on a corridor level, (2017), Transportation Research Part-D: Transport and Environment, Volume 54, July 2017, pp. 304-320, (DOI: 10.1016/j.trd.2017.05.016).
Fernandes, P.J., Salamati, K., Rouphail, N.M. and Coelho, M.C., The effect of a roundabout corridor’s design on selecting the optimal crosswalk location: a multi-objective impact analysis, (2017), International Journal of Sustainable Transportation, Volume 11, No. 3, pp. 206-220, (DOI: 10.1080/15568318.2016.1237689).
Biga, N., Bandeira, J.M. and Abrantes, V., Improving public transport management through optimizing use of resources: A case study, (2017), International Journal for Housing Science and Its Applications, 41 (1), pp. 13-23.
Martins, J.M.P., Neto, D.M., Alves, J.L., Oliveira, M.C., Laurent, H., Andrade-Campos, A. and Menezes, L.F., A new staggered algorithm for thermomechanical coupled problems, (2017), International Journal of Solids and Structures, 122-123, pp. 42-58, (DOI: 10.1016/j.ijsolstr.2017.06.002).
Coelho, B. and Andrade-Campos, A., Numerical tool for hydraulic modelling - An educational approach, (2017), International Journal of Mechanical Engineering Education, 45 (3), pp. 260-285, (DOI: 10.1177/0306419017708637).
Souto, N., Andrade-Campos, A. and Thuillier, S., Mechanical design of a heterogeneous test for material parameters identification, (2017), International Journal of Material Forming, 10 (3), pp. 353-367, (DOI: 10.1007/s12289-016-1284-9).
Pehilj, A., Krstulovic-Opara, L., Bagavac, P., Vesenjak, M., Duarte, I. and Domazet, Z., The detection of plastic flow propagation based on the temperature gradient, (2017), Materials Today: Proceedings, 4 (5), pp. 5925-5930, (DOI: 10.1016/j.matpr.2017.06.071).
Zhiltsova, T., Daga, B., Frontini, P., Neto, V. and Oliveira, M., Mechanical testing of micromolded plastic parts by nanoindentation, (2017), Polymer Engineering and Science, In Press, available online, (DOI: 10.1002/pen.24799).
Paulo, R.M.F., Carlone, P., Paradiso, V., Valente, R.A.F. and Teixeira-Dias, F., Prediction of friction stir welding effects on AA2024-T3 plates and stiffened panels using a shell-based finite element model, (2017), Thin-Walled Structures, 120, pp. 297-306, (DOI: 10.1016/j.tws.2017.09.009).
Duarte, R., Mesnard, M., De Miollis, F., Ramos, A., Wentzy, P. and De Sèze, M., Influência do Posicionamento de elétrodos eletromiográficos superficiais durantes testes de actividade muscular, (2017), Revista Portuguesa de Mecânica experimental, vol. 28, pág. 9-14. ISSN 1646-7078.


Artigos em Conferência, Eventos Nacionais e Internacionais

Barlat, F., Vincze, G. and Tomé, C.N., (Guest Editors), Constitutive Descriptions of Plasticity at Various Scales in memory of Prof. José J. Grácio, (2017), International Journal of Plasticity, 93, pp. 1-290 (http://www.sciencedirect.com/science/journal/07496419/93?sdc=1).
Sousa, R.J.A., and Anjos, O., Cork in Science and Applications, (2017), International Conference on Cork Science and Applications (CSA2017), Materials Research Forum, ISSN 2474-3941 (print), available online, 2474-395X.
Carou, D., Rubio, E.M., Lauro, C.H., Brandão, L.C. and Davim, J.P., Study Based on Sound Monitoring as a Means for Superficial Quality Control in Intermittent Turning of Magnesium Workpieces, (2017), Procedia CIRP, 62, pp. 262-268, (DOI: 10.1016/j.procir.2016.06.061).
Afonso, D., Sousa, R.J.A. and Torcato, R., Incremental Forming of Tunnel Type Parts, (2017), Procedia Engineering, 183, pp. 137-142, (DOI: 10.1016/j.proeng.2017.04.036).
Benedicto, E., Carou, D. and Rubio, E.M., Technical, Economic and Environmental Review of the Lubrication/Cooling Systems Used in Machining Processes, (2017), Procedia Engineering, 184, pp. 99-116, (DOI: 10.1016/j.proeng.2017.04.075).
Afonso, D., Pires, L., Sousa, R.J.A. and Torcato, R., Direct rapid tooling for polymer processing using sheet metal tools, (2017), Procedia Manufacturing, 13, pp. 102-108, (DOI: 10.1016/j.promfg.2017.09.016).
Fernandes, F.A.O. and Sousa, R.J.A., The Applicability of Agglomerated Cork in Protective Helmets, (2017), International Conference on Cork in Science and Applications, Materials Research Forum, available online, 2474-395X.
Fernandes, F.A.O., Tavares, J.P., Sousa, R.J.A., Pereira, A.B. and Esteves, J.L., Manufacturing and testing composites based on natural materials, (2017), Procedia Manufacturing, 13, pp. 227-234, (DOI: 10.1016/j.promfg.2017.09.055).
Fernandes, F.A.O., Oliveira, D.F. and Pereira, A.B., Optimal parameters for laser welding of advanced high-strength steels used in the automotive industry, (2017), Procedia Manufacturing, 13, pp. 219-226, (DOI: 10.1016/j.promfg.2017.09.052).
Xue, X., Pereira, A. B., Vincze, G., Amorim, J., and Liao, J., Micro-hardness characteristics of DP1000 steel butt joint by pulsed Nd: YAG laser welding, (2017), 7th International Conference on Welding Science and Engineering (WSE & CAWE 2017).
Santos, P.T, Pinto, S., Marques, P.M., Pereira, A.B. and Sousa, R.J.A., Tailoring mechanical properties of cork agglomerates, Conference Cork in science and applications (CSA2017).
Margarido, J.M., Pinto, S., Marques, P.M., Pereira, A.B. and Sousa, R.J.A., Nanoengineered cork agglomerates: mechanical properties, (2017) Conference Cork in science and applications (CSA2017).
Pereira, A.B., Almeida, D.S.S., Borodachenkova, M., Vincze, G. and Filipe, B., Sensibilidade à mudança de trajetória de deformação no aço TWIP 980, (2017), 13º Congresso Ibero-americano de Engenharia Mecânica. AE
Dantas, L.H.P., Santos, J.P. and da Silva, F.N., Utilização de energia solar fotovoltaica para carregamento de veículos elétricos, (2017), 13º Congresso Ibero-Americano de Engenharia Mecânica, CIBEM 2017. Ledoux, Y., Ramos, A. and Mesnard, M., Optimizing the Architecture of a Dynamic Spinal Implant for Customized Mechanical Behavior, (2017), Procedia CIRP, 65, pp. 273-278, (DOI: 10.1016/j.procir.2017.04.056).
Regufe, L., Duarte, R., Ramos, A., Nadeau, J.-P., Perry, N. and Mesnard, M., An Exhaustive Method for Researching Articular Orthosis Mechanisms at the Conceptual Design Stage, (2017), Procedia CIRP, 60, pp. 482-487, (DOI: 10.1016/j.procir.2017.01.050).
Bola, M., Ramos, A. and Simões, J.A., Numerical predictions of strain distributions in total shoulder arthroplasty for several abduction angles, (2017), European Society of Biomechanics (ESB).
Semedo, T., Mesnard, M. and Ramos, A., Finite element study of osteosyntheses of mandibular angle fractures, (2017), European Society of Biomechanics (ESB).
Rocha, C., Mesnard, M. and Ramos, A., Numerical predicitons in osteochondral lesion in ankle joint, (2017), European Society of Biomechanics (ESB).
Mesnard, M., Duarte, R., Ramos, A., Nadeau, J.P., and Perry, N., Designing simplification strategies for solving problems at an architectural analysis stage, (2017), CIRP - International Academy for Production Engineering.
Gonzalez-Perez, L.M., Centeno, G., Ramos, A.M., Gonzalez-Perez-Somarriba, B., Vallellano, C. and Egea-Guerrero, J.J., Prosthesis loading, biomaterials and surgical workflow in temporo-mandibular replacement, (2017), 23rd International Conference on Oral & Maxillofacial Surgery (ICOMS2017).
Duarte, R., Ramos, A. and Mesnard, M., Conceptual design method for the development of an articular orthosis - Camptocormia brace, (2017), 7th International Conference on Mechanics and Materials in Design, (M2D 2017).
Mesnard, M. and Ramos, A., Optimizing the material choice and the design of a spinal implant, (2017), BIOMAAP.
Duarte, R., Ramos, A. and Mesnard, M., Embodiment Design Process in the Development of Articular Orthosis, (2017), European Conference on Design, Modeling and Optimization (ECDMO 2017).
Pereira, J., Ramos, A. and Completo, A., The importance of the resurfacing acetabular cup position in iliac: an in vitro comparative study, (2017), Bone Joint J, 99-B (SUPP 2), 64.
Ramos, A. and Mesnard, M., Study load transfer in a cadaveric mandible ramus with a biomet TMJ implant fixation, (2017), Bone Joint J, 99-B (SUPP 2), 51.
Bola, M., Ramos, A. and Simões, J., Experimental and numeric predictions of strain distribution in comprehensive® total shoulder system arthroplasty, (2017), Bone Joint J, 99-B (SUPP 2), 24.
Bola, M., Simões, J.A. and Ramos, A., Palestras de índole técnica junto da comunidade industrial, (2017), Encontro com a ciência e tecnologia em Portugal 2017.
Bola, M., Simões, J.A. and Ramos, A., Validação de modelo de ombro intato e implantado, (2017), 7º Congresso Nacional de Biomecânica, pp:311-312.
Duarte, R., de Sèze, M., Wentz, P., Ramos, A. and Mesnard, M., Camptocormia trunk behavior discrimination for medical device development, (2017), 7º Congresso Nacional de Biomecânica, pp:269-270.
Ramos, A. and Mesnard, M., Estudo numérico e experimental em côndilo cadavérico após colocação de implante temporomandibular, (2017), 7º Congresso Nacional de Biomecânica, pp:215-216.
Dos Santos, M.P.S., Ferreira, J.A.F., Ramos, A., Simões, J.A.O., Vieira, S.I., Marote, A., da Cruz e Silva, O.A.B., Santos, T., Torrão, J. and Furlani, E., Instrumented active implants: A new concept model, (2017), 7º Congresso Nacional de Biomecânica, pp:239-240.
Oliveira, M.T., Potes, J.C., Queiroga, M., Rehman, S., Dalgarno, K., Ramos, A. and Reis, J.C., Desenvolvimento de um Modelo animal in vivo para vertebro plastia percutânea, (2017), 7º Congresso Nacional de Biomecânica, pp:19-20.
Dos Santos, M.P.S., Ramos, A., Simões, J.A.O., da Cruz e Silva, O.A.B., Furlani, E., Vieira, S.I. and Ferreira, J.A.F., A new concept model for instrumented active implants, (2017), Proceedings of the 23rd Congress of the European Society of Biomechanics.
Girão, A.F., Ramalho, G., Completo, A. and Marques, P.A.P.P., An adaptive biomimetic graphene-oxide-collagen scaffold for tissue engineering applications, (2017), Graphene Week 2017.
Nobrega, A., Girão, R. A., Marques, P. and Completo, A., Development of a physiological collagen architecture through anisotropic nanofibrous polycaprolactone-collagen scaffold for cartilage tissue engineering, (2017), 7º Congresso Nacional de Biomecânica, pp: 293-294.
Girão, A., Gonçalves, G., Almeida, S., Completo, A. and Marques, P., Graphene oxide-collagen scaffold as a useful microenvironment for mechanical stimulation on tissue engineering, (2017), 7º Congresso Nacional de Biomecânica, pp: 295-296.
Cortez, S., Completo, A. and Alves, J.L., Modelo computacional para análise do desenvolvimento de construções de cartilagem em bioreator, (2017), 7º Congresso Nacional de Biomecânica, pp: 287-288.
Girão, A.F., Gonçalves, G., Nóbrega, A.J., Almeida, S.S., Completo, A. and Marques, P.A.A.P., A graphene-oxide-collagen scaffold as a versatile three-dimensional biomimetic microenvironment for tissue engineering applications, (2017), Materiais 2017. NRG
Titus, E., Ventura, J., Gil, J.C., Neto, V., Singh, A., Chaudhari, A. and Rangel, C.M., Preface to the special issue on “The 1st international conference on Advanced Energy Materials (AEM2016), 12–14 September 2016, Surrey, England”, (2017), International Journal of Hydrogen Energy, 42 (37), p. 23403, (DOI: 10.1016/j.ijhydene.2017.08.008).
Domingues, M.F.F., Rodriguez, C.A., Martins, J., Alberto, N., Marques, C., Ferreira, M., André, P. and Antunes, P., Cost-effective in-line optical fiber fabry-perot interferometric pressure sensor, (2017), Optics InfoBase Conference Papers, Part F52-IPRSN 2017, 3 p, (DOI: 10.1364/IPRSN.2017.JTu4A.15).
Ramasamy, D., Graça, V., Nasani, N., Pukazhselvan, D., Yang, T., da Silva, E.L. and Fagg, D.P., A New buffer layer for improved performance of SOFC cathode, (2017), Advanced Nano Materials 2017 International Conference.
Ramasamy, D., Graça, V., Nasani, N., Pukazhselvan, D., Yang, T., da Silva, E.L. and Fagg, D.P., Surface morphology of thin film preparation at higher sintering temperature, (2017), Advanced Nano Materials 2017 International Conference.
Kyatam, S., Camacho, P., Rodrigues, L., Alves, L.N. and Mendes, J.C., Thermal Analysis of high power LEDs using different PCB materials, (2017), 23 European Conference on Circuit Theory and Design, (ECCTD 2017).
Martins, P., Alves, L.N. and Mendes, J.C., On the dynamics of accelerated observers in Special Relativity, (2017), 23 European Conference on Circuit Theory and Design, (ECCTD 2017).
Martins, P., Alves, L.N. and Mendes, J.C., On the dynamics of accelerated observers in special relativity theory, (2017), International Conference on Memristive Materials, Devices & Systems, (MEMRISYS 2017).
Pukazshelvan, D., Nasani, N., Yang, T., Shaula, A. and Fagg, D.P., Effect of Mg2TiO4 and MgTiO3 additives on the hydrogen storage behavior of MgH2, (2017), 8th International conference on Advanced Nanomaterials.
Domingues, M., Martins, J., Rodriguez, C., Tavares, C., Alberto, N., André, P. and Antunes, P., Low cost intrinsic Fabry-Perot interferometric optical fiber strain and pressure sensor, (2017), III International Conf. on Applications in Optics and Photonics.
Marques, C., Alberto, N., Antunes, P., Leitão, C., Domingues, M., Pinto, J.L. and André, P., Acoustic waves in tilted fiber Bragg gratings for sensing applications, SPIE Optics+Optoelectronics, (2017), Proc. SPIE, Vol. 10231, pp. 1023116 (5pp), (DOI: 10.1117/12.2264230).
Marques, C., Alberto, N., Domingues, M.F., Leitão, C., Antunes, P., Pinto, J.L. and André, P., Refractive index sensor based on tilted fiber Bragg gratings driven by acoustic waves, (2017), Conf. on Lasers and Electro-optic, (DOI: 10.1109/CLEOE-EQEC.2017.8086900).
Domingues, M.F., Tavares, C., Alberto, N., Leitão, C., Antunes, P., André, P., Lima, E., Sucasas, V., Radwan, A. and Rodriguez, J., Non-invasive insole optical fiber sensor architecture for monitoring foot anomalies, (2017), IEEE Globecom2017.
Zeng, A., Shrestha M., Wang, K., Neto, V.F., Gabriel, B., and Fan Q.H., Plasma nitriding to pasivate silicon surface for photo-electrochemical water splitting, (2017), Materials 2017. TT
Dantas, L.H.P., Santos, J.P.O. and Da Silva, F.N., Utilização de energia solar fotovoltaica para carregamento de veículos elétricos, (2017), Atas do CIBEM2017, 13º Congresso Ibero-americano de Engenharia Mecânica /Ingeniería Mecánica.
Fernandes, P. and Coelho, M.C., Pedestrian and Cyclists Impacts on vehicular Capacity and Emissions at different Turbo-roundabouts layouts (2017), Transportation Research Procedia 27, pp. 452–459, 20th Euro Working Group on Transportation, (EWGT 2017), (DOI: 10.1016/j.trpro.2017.12.003).
Tafidis, P., Coelho, M.C., Niculescu, M. C., Voicu, A., Barbu, C., Jianu, N., Pocostales, F.J.M., Laranjeira, C.M. and Bandeira, J., Exploring the impact of ICT on urban mobility in heterogenic regions, (2017), Transportation Research Procedia 27, pp. 309–316, 20th Euro Working Group on Transportation, (EWGT 2017), (DOI: 10.1016/j.trpro.2017.12.030).
Fernandes, P., Teixeira, J., Sousa, A., Guarnaccia, C. and Coelho, M.C., Multi-Criteria Assessment of Crosswalk Location on a Corridor with Roundabouts: Incorporating a Noise Related Criterion, (2017), Transportation Research Procedia 27, pp. 460–467, 20th Euro Working Group on Transportation, (EWGT 2017), (DOI: 10.1016/j.trpro.2017.12.016).
Vilaça, M., Silva, N. and Coelho, M.C., Statistical Analysis of the Occurrence and Severity of Crashes Involving Vulnerable Road Users: Portugal Experience, (2017), Transportation Research Procedia 27, pp. 1113-1120, 20th Euro Working Group on Transportation, (EWGT 2017), (DOI: 10.1016/j.trpro.2017.12.113).
Bahmankhah, B. and Coelho, M.C., Multi-objective optimization for short distance trips in an urban area: choosing between motor vehicle or cycling mobility for a safe, smooth and less polluted route, (2017), Transportation Research Procedia 27, pp. 428–435, 20th Euro Working Group on Transportation, (EWGT 2017), (DOI: 10.1016/j.trpro.2017.12.009).
Bahmankhah, B. and Coelho, M.C., Multi-objective Optimization for Passengers’ Routing Using Car/Bicycle, (2017), Encontro com a Ciência e Tecnologia em Portugal.
Fernandes, P., Coelho, M.C. and Rouphail, N.M., Understanding roundabouts: Isolated or Together, (2017), Encontro com a Ciência e Tecnologia em Portugal.
Tafidis, P., and Bandeira, J., Interregional European Cooperation Platform to Promote Sustainable Transport through ICT, (2017), 10th International Conference on PErvasive Technologies Related to Assistive Environments, (PETRA '17).
Tafidis, P., Teixeira, J., Bahmankhah, B., Macedo, E., Coelho, M.C. and Bandeira, J., Exploring Crowdsourcing Information to Predict Traffic-Related Impacts, (2017), 17th International Conference on Environment and Electrical Engineering, (IEEE EEEIC 2017).
Bandeira, J.M., Friedrich, B., Borrego, C. and Coelho, M.C., Digital map structure for an Equitable and Sustainable road use, (2017), International Conference on Vehicle Technology and Intelligent Transport Systems, (VEHITS 2017).
Coelho, M.C., Bandeira, J.M., Fernandes, P., Bahmankhah, B., Vilaça, M., Borrego, C., Rodrigues, V., Barraca, J.P. and Gomes, D., Development of an Advanced Impact Integration Platform For Cooperative Road Use: The @CRUiSE Project, (2017), 14.º Encontro do Grupo de Estudos de Transportes.
Teixeira, J., Fernandes, P., Bandeira, J.M. and Coelho, M.C., Information Management for Smart and Sustainable Mobility, (2017), 14.º Encontro do Grupo de Estudos de Transportes.
Bandeira, J., Dutta, S., Tafidis, P. and Coelho, M.C., CISMOB – Cooperative information platform for low carbon and sustainable mobility, (2017), 14.º Encontro do Grupo de Estudos de Transportes.
Fernandes, P., Rouphail, N.M. and Coelho, M.C., Main Benefits and Limitations of Using Conventional Roundabouts and Turboroundabouts Along Corridors, (2017), 14.º Encontro do Grupo de Estudos de Transportes.
Bahmankhah, B. and Coelho, M.C., Multi-Objective Optimization for Passengers’ Routing Using Passenger Car Vs. Bicycle, (2017), 14.º Encontro do Grupo de Estudos de Transportes.
Fernandes, P., Rouphail, N.M. and Coelho, M.C., Turbo-Roundabouts Along Corridors: Analysis of Operational and Environmental Impacts, (2017), 96th Transportation Research Board Annual Meeting.
Teixeira, J., Fernandes, P., Bandeira, J.M. and Coelho, M.C., Information Management for Smart and Sustainable Mobility, (2017), 96th Transportation Research Board Annual Meeting. GRIDS
Tucci, F., Rubino, F., Paradiso, V., Carlone, P. and Valente, R., Modelling and simulation of cure in pultrusion processes, (2017), AIP Conference Proceedings, 1896, 070003, (DOI: 10.1063/1.5008078).
Pinto, S. C., Pinto, R., Duarte, I., Vicente, R., Freire, C. and Marques, P.A.A.P., Bacterial cellulose and graphene nanostructures as promising nanocomposites for the development of new insulating and fire-retardant materials, (2017), Proceedings of VIII International Symposium on Materials, pp.90, XVIII Congresso da Sociedade Portuguesa dos Materiais.
Aquino, J., Duarte, I. and Dias-de-Oliveira, J., Prediction of effective properties for simulation and optimization of metal foams, (2017), Proceedings of the Congress on Numerical Methods in Engineering (CMN 2017), ISBN: 978-84-947311-0-5, pp. 793, International Center for Numerical Methods in Engineering (CIMNE).
Aquino, J., Dias-de-Oliveira, J., Vesenjak, M. and Duarte, I., Methodologies for the prediction of effective properties of metal foams, (2017), Proceedings of 20th International Conference on Composite Structures, pp. 303, ICCS20, (DOI 10.15651/978-88-938-5041-4).
Vesenjak, M., Duarte, I., Dias-de-Oliveira, J., Krstulović-Opara, L. and Ren, Z., Mechanical performance of tubular structures filled with hybrid foams, (2017), Proceedings of 20th International Conference on Composite Structures, pp. 304, ICCS20, ISSN 24-21, ISBN 978-889-385-041-4, (DOI 10.15651/978-88-938-5041-4).
Pinto, S.C., Pinto, R.J.B., Freire, C.S.R., Duarte, I., Vicente, R. and Marques, P.A.A.P., Hybrid structures based on cellular materials, (2017), Cellular Materials: Structural Behaviour, Modelling and Characterisation, pp. 90, ISBN 978-972-99784-5-6.
Duarte, I., Vesenjak, M. and Krstulović-Opara, L., Multifunctional foam filled tube, (2017), Cellular Materials: Structural Behavior, Modelling and Characterization, ISBN 978-972-99784-5-6, pp. 88.
Duarte, I. and Ferreira, J.M.F., Metal Nanocomposite foams, (2017), Cellular Materials: Structural Behavior, Modelling and Characterization, ISBN 978-972-99784-5-6, pp. 84.
Aquino, J., Duarte, I. and Dias-de-Oliveira, J., Modelling and effective properties prediction of metal foams, (2017), Cellular Materials: Structural Behavior, Modelling and Characterization, ISBN 978-972-99784-5-6, pp. 66.
Krstulović-Opara, L., Vesenjak, M. and Duarte, I., Visualizing strain in dynamically loaded cellular materials, (2017), Cellular Materials: Structural Behavior, Modelling and Characterization, ISBN 978-972-99784-5-6, pp. 58.
Pinto, S.C., Novak, N., Vesenjak, M., Vicente, R., Marques, P.A.A.P. and Duarte, I. Mechanical behavior of aluminum-cork hybrid foams, (2017), Cellular Materials: Structural behavior, Modelling and Characterization, ISBN 978-972-99784-5-6, pp. 52.
Aquino, J., Rodrigues, T., Duarte, I. and Dias-de-Oliveira, J., Testing and modelling the behavior of metal foams, a path towards prediction and optimization, (2017), Cellular Materials: Structural behavior, Modelling and Characterization, ISBN 978-972-99784-5-6, pp. 86.
Duarte, I., Dynamic behavior of cellular materials, (2017), Proceedings of 11th Workshop on Dynamic behavior of materials and its applications in industrial processes, ISBN 978-972-99596-3-9.
Barroqueiro, B., Pinho-da-Cruz, J., Dias-de-Oliveira, J. and Andrade-Campos, A., Heat Treatment Analysis of Multiphase Steel Using a Reduced Multiscale Model, (2017), CMN2017 – Congress on Numerical Methods in Engineering.
Martins, J.M.P., Andrade-Campos, A. and Thuillier, S., Parameter Identification Strategies for non-linear mechanical models, (2017), Proceedings of the Congress on Numerical Methods in Engineering CMN2017.
Andrade-Campos, A., Martins, J.M.P. and Ferreira, E., Loading path design and material parameter identification in elastoplasticity using SVD techniques, (2017), Proceedings of the Congress on Numerical Methods in Engineering CMN2017.
Martins, J.M.P., Andrade-Campos, A. and Thuillier, S., Parameter Identification Strategies for non-linear mechanical models, (2017), Proceedings of the DCE17, 2nd Doctoral Congress of Engineering.
Duarte, I., Vesenjak, M. and Krstulović-Opara, L., Crush performance of foam filled tubes made of aluminum alloys at different loading conditions, (2017), International Journal of Automotive Composites, accepted in 18 May 2017. In Press, available online, ISSN online: 2051-8226, ISSN print: 2051-8218.


Apresentações Ciêntificas Internacionais
Convites

Alves de Sousa, R.J., YEAHM, Yet Another Head Model, Erasmus Mundus mobility, Wroclaw, Poland, 14 de junho de 2017.
F. Barlat, Modeling yield surface evolution for steel after uniaxial tension prestrain. Materials Science & Technology (MS&T) 2017, Pittsburgh, PA, October 8-12, 2017.
F. Barlat, Constitutive modeling in non-proportional loading, The 36th International Deep Drawing Research Group (IDDRG 2017), July 02-06, 2017, Munich, Germany.
F. Barlat, Theoretical modeling of plasticity, International Seminar on Metal Plasticity, June 19, 2017, Rome, Italy.  
Santos, T., Hennetier, L., Costa, V.A.F. and Costa, L.C., Macro and Microstructure Properties of Microwave Fired Porcelain, (2017), Materiais 2017 – XVIII Congresso da Sociedade Portuguesa dos Materiais, University of Aveiro, Aveiro (Portugal), (09-12 April).
Santos, T., Amaral, J.S., Costa, V.A.F. and Amaral, V.S., Thermal Conductivity of Agglomerate Cork, (2017), Cork in Science and Applications 2017, University of Aveiro, Aveiro (Portugal), (07-08 September).
Santos, T., Hennetier, L., Costa, V.A.F. and Costa, L.C., Stoneware Microwave Single-Firing Cycle, (2017), i3N VI Annual Meeting, University Nova de Lisboa, Lisboa (Portugal), (24-25 February).
Neto, V., Graphene based sensors for air quality monitoring, (2017), The 1st International Online Conference on Nanoscience & Nanotechnology (N@NO’2017), Africa Graphene Center, (02 – 03 December).
Neto,V., Nanotecnologia – do Laboratório para a Sociedade, (2017), XXXVII International Sodebras Congress, Vila Galé, Fortaleza, CE, Brazil, (6 – 8 June).
Pukazhselvan, D., Nanocatalysis for the realization of hydrogen storage targets, Global Conference 2017, University of Aveiro, Portugal, (July 17-19).
Fagg, D.P., Narendar Nasani, D. Pukazhselvan, Protonic Ceramic Electrochemical Cells, mESC-IS 2017, International Conference on Materials for Energy Storage and Conversion, Cappadocia, Turkey, 2017
Bandeira, J., Improving policy instruments in Centro Region towards low carbon mobility, (2017), CISMOB 2nd Thematic conference, Bucharest, (9 October).
Bandeira, J., Mobility in CENTRO region - key challenges towards low carbon mobility, (2017), CIVITAS International Forum, Torres Vedras, (28 September).
Coelho, M.C., Intelligent Transportation Systems for a safe, smooth and less polluted road environment, (2017), Workshop (SoCIaL) Smart cities & Smart mobility towards improving quality of life & Well-being of 10th International Conference on PErvasive Technologies Related to Assistive Environments (PETRA), Rhodes, (22 June).
Macedo, E., CISMOB - Cooperative Information Platform for Low Carbon and Sustainable Mobility, Towards a Zero Carbon Economy Beyond 2030 - Sustainable Urban Centre, (2017), Project Presentation, University of Malta, (29 May).
Coelho, M.C., Movilidad Inteligente: Desafíos y Oportunidades de investigación científica, (2017), Expo Energea, Cáceres, (23 March).
Bandeira, J., Proyecto CISMOB – Visión e Objetivos, (2017), Expo Energea, Cáceres, (23 March).  
Duarte, I., Dynamic behavior of cellular materials, (2017), Plenary Lecture, 11th Workshop on Dynamic behavior of Materials and its Applications in Industrial Processes, Dymat Workshop, University of Minho, Guimarães, (August 23th).
Duarte, I., Metal Foams for Engineering Applications, (2017), SHOW CASE, Technologies Based on Scientific Development, VIII International Symposium on Materials, (April 11th).
Valente, R., Numerical simulation of Friction Stir Welding (FSW): Issues on modelling the heat affected zone and prediction of residual stresses, (2017), Doctoral Program on Computational Mechanics and Advanced Materials, Istituto Universitario di Studi Superiori di Pavia, Universidade de Pavia, Italy, (19-20 de June).
Andrade-Campos, A., Program the Optimization that Mimics Nature, (2017), Europe Codeweek: GRIDS Code17. Workshop within the European Code Week, Organized by GRIDS, Universidade de Aveiro, Aveiro, Portugal, (11th October).  


Apresentações Orais

Fernandes, F.A.O. and de Sousa, R.J.A., Development of a cork-based safety helmet, (2017), Cork in Science and Applications, Universidade de Aveiro, Portugal, (7-8 de September).
Santos, P.T., Pinto, S., Marques, P.M., Pereira, A.B. and de Sousa, R.J.A., Tailoring mechanical properties of cork agglomerates, (2017), CorkScience – Cork in Science and Applications, Universidade de Aveiro, Portugal, (7-8 de September).
Pereira, A.B., Almeida, D.S.S., Borodachenkova, M., Vincze, G. and Filipe, B., Sensibilidade à mudança de trajetória de deformação no aço TWIP980, (2017), 13º Congresso Ibero-americano de Engenharia Mecânica - CIBEM2017, Lisboa, (23-26 october).
Afonso, D., de Sousa, R.A. and Torcato, R., A cost-effective methodolgy to perform customized moulding of cork agglomerates, (2017), CorkScience – Cork in Science and Applications, Universidade de Aveiro, Portugal, (7-8 de September).
Afonso, D., Pires, L., de Sousa, R.J.A. and Torcato, R., Direct rapid tooling for polymer processing using sheet metal tools, (2017), Proceedings of the 7th Manufacturing Engineering Society International Conference, Vigo, Spain, (June).
Afonso, D.G., Torcato, R. and de Sousa, R.J.A., Testing Single Point Incremental Forming Molds for Rotomolding Operations, (2017), Proceedings of Esaform 2017, Dublin, Ireland (April 25-27).
Afonso, D.G., Torcato, R. and de Sousa, R.J.A., Incremental forming of tunnel type parts, (2017), Proceedings of SheMet 2017, Palermo, Italia, (April 10-12).
Fernandes, F.A.O., Tavares, J.P., de Sousa, R.J.A., Pereira, A.B. and Esteves, J.P., Manufacturing and testing composites based on natural materials, (2017), MESIC2017, the 7th Manufacturing Engineering Society International Conference, Vigo.
Fernandes, F.A.O., Oliveira, D.F. and Pereira, A.B., Optimal parameters for laser welding of advanced high-strength steels used in the automotive industry, (2017), MESIC2017, the 7th Manufacturing Engineering Society International Conference, Vigo.
Fernandes, F.A.O., de Sousa, R.J.A. and Ptak, M., The Applicability of Agglomerated Cork in Protective Helmets, (2017), CorkScience – Cork in Science and Applications, University of Aveiro, Portugal, (7-8 September).
Margarido, J.M., Pinto, S., Marques, P.M., Pereira, A.B. and de Sousa, R.J.A., Nanoengineered cork agglomerates: mechanical properties, Conference Cork in science and applications, CSA2017, Aveiro, (7-8 September).
Xue, X., Pereira, A. B., Vincze, G., Amorim, J. and Liao, J., Micro-hardness characteristics of DP1000 steel butt joint by pulsed Nd: YAG laser welding, 7th International Conference on Welding Science and Engineering (WSE & CAWE 2017), Jinan, China, (Oct. 18-20).
Carou, D., Rubio, E.M., Herrera, J., Lauro, C. H. and Davim, J.P., Latest advances in the micro-milling of titanium alloys: a review, (2017), Manufacturing Engineering Society International Conference 2017, MESIC 2017, Vigo (Pontevedra), Spain, (June).
Barlat, F., Simplified representations of multiaxial test results in plasticity, (2017), The 5th International Conference on Material Modeling (ICMM5), Rome, Italy, (June 13-16).
Picu, R.C. and Vincze, G., Multiscale investigation of the strain rate sensitivity of TWIP steels, (2017), International conference on plasticity, damage, and fracture, Puerto Vallarta, Mexico, (January 3-9). GIBUA
Dos Santos, M.P.S., A new concept model for Instrumented active implants, (2017), 23rd Congress of the European Society of Biomechanics, Seville, Spain, (July 2-5).
Semedo, T., Mesnard, M. and Ramos, A., Finite element study of osteosyntheses of mandibular angle fractures, (2017), European Society of Biomechanics (ESB), Seville, Spain, (02 July).
Rocha, C., Mesnard, M. and Ramos, A., Numerical predictions in osteochondral lesion in ankle joint, (2017), European Society of Biomechanics (ESB), Seville, Spain, (02 July).
Semedo, T., Mesnard, M. and Ramos, A., Finite element study of osteosyntheses of mandibular angle fractures, (2017), European Society of Biomechanics (ESB) Seville, Seville, Spain, (02 July).
Rocha, C., Mesnard, M. and Ramos, A., Numerical predictions in osteochondral lesion in ankle joint, (2017), European Society of Biomechanics (ESB) Seville, Seville, Spain, (02 July).
Gabriel, B., Marques, P.A.A.P. and Neto, V., Nanotechnology Usability tool for optimization of nano-based products, (2017), Materiais 2017, University of Aveiro, Portugal, (9-12 April).
Kyatam, S., Camacho, P., Alves, L.N. and Mendes, J.C., Thermal analysis of high power LEDs, (2017), WOCSDICE 2017 – 41st Workshop on Compound Semiconductor Devices and Integrated Circuits held in Europe, Las Palmas de Gran Canaria, Spain, (21-24 May).
Mukherjee, D., Alves, L.N. and Mendes, J.C., Diamond-SiC heterojunctions – the influence of argon flow on the electrical behavior of CVD diamond, (2017), WOCSDICE 2017 – 41st Workshop on Compound Semiconductor Devices and Integrated Circuits held in Europe, Las Palmas de Gran Canaria, Spain, (21-24 May).
Silibin, M.V., Bystrov, V.S., Karpinsky, D., Vaghefi, P.M., Marques, P.A.A.P., Nasani, N., Goncalves, G., Singh, B. and Bdikin, I.K., Local electrostatic properties of P(VDF-TrFE)/ Graphene oxide composite films and nanofibers, (2017), Global 2017 Conference, University of Aveiro, Aveiro, Portugal, (July 17-19).
Amaral, C., Vicente, R., Ferreira, V.M., Silva, T., Marques, P.A.A.P. and Barros-Timmons, A., Thermal performance assessment/evaluation of polyurethane foams with phase change materials, (2017), Materiais 2017, Aveiro, Portugal, (9 – 12 April).
Amaral, C., Vicente, R., Marques, P.A.A.P. and Barros-Timmons, A., Development of rigid polyurethane foam incorporating phase change material microencapsulated with calcium carbonate shell for thermal energy storage, (2017), Materiais 2017, Aveiro, Portugal, (9 – 12 April).
Pinto, S., Duarte, I., Vicente, R. and Marques, P.A.A.P., Bacterial cellulose and graphene nanostructures as promising nanocomposites for the development of new insulating and fire-retardant materials, (2017), Materiais 2017, Aveiro, Portugal, (9 – 12 April).
Girão, A.F., Completo, A. and Marques, P.A.A.P., A graphene-oxide-collagen scaffold as a versatile three-dimensional biomimetic microenvironment for tissue engineering applications, (2017), Materiais 2017, Aveiro, Portugal, (9 – 12 April).
Narendar, N. and Fagg, D.P., Conductivity recovery by redox cycling of yttrium doped barium zirconate proton conductors and exsolution of Ni-based sintering additives, (2017), VI Symposium on Hydrogen, Fuel Cells and Advanced Batteries, Hyceltec, Porto, Portugal. TT
Dantas, L.H.P., Santos, J.P.O. and Da Silva, F.N., Utilização de energia solar fotovoltaica para carregamento de veículos elétricos, (2017), CIBEM2017, 13º Congresso Ibero-americano de Engenharia Mecânica / Ingeniería Mecánica, Lisbon, (23-26 October).
Vilaça, M., Statistical Analysis of the Occurrence and Severity of Crashes Involving Vulnerable Road Users: Portugal Experience, (2017), 20th Euro Working Group on Transportation - EWGT 2017, Budapest, (6 September).
Coelho, M.C., Multi-Criteria Assessment of Crosswalk Location on a Corridor with Roundabouts: Incorporating a Noise Related Criterion, (2017), 20th Euro Working Group on Transportation - EWGT 2017, Budapest, (5 September).
Fernandes, P., Pedestrian and Cyclists Impacts on vehicular Capacity and Emissions at different Turbo-roundabouts layouts, (2017), 20th Euro Working Group on Transportation - EWGT 2017, Budapest, (5 September).
Tafidis, P., Exploring the impact of ICT on urban mobility in heterogenic regions, (2017), 20th Euro Working Group on Transportation - EWGT 2017, Budapest, (5 September).
Bahmankhah, B., Multi-objective optimization for short distance trips in an urban area: choosing between motor vehicle or cycling mobility for a safe, smooth and less polluted route, (2017), 20th Euro Working Group on Transportation - EWGT 2017, Budapest, (4 September).
Bandeira, J., Interregional European Cooperation Platform to Promote Sustainable Transport through ICT, (2017), 10th International Conference on PErvasive Technologies Related to Assistive Environments - PETRA '17, Rhodes, (22 June).
Bandeira, J.M., Digital map structure for an Equitable and Sustainable road use, (2017), International Conference on Vehicle Technology and Intelligent Transport Systems (VEHITS 2017), Porto, (April).
Aquino, J., Duarte, I. and Dias-de-Oliveira, J., Prediction of effective properties for simulation and optimisation of metal Foams, (2017), CMN2017 – Congress on Numerical Methods in Engineering, Valencia, Spain, (4 of July).
Pinho-da-Cruz, J., A Reduced Multiscale Model for Heat Treatments in Multiphase Steels, (2017), CMN2017 – Congress on Numerical Methods in Engineering, Valencia, Spain, (4 of July).


Apresentações em Póster

Ajeeb, W., Oliveira, M.S.A. and Martins, N., Promoting Energy Efficiency by Heat Exchanging Intensification using MWCNT based Nanofluids, (2017), ANM2017- International Conference of Advanced Nanomaterial, University of Aveiro, Aveiro, Portugal, (19-21 July).
Ajeeb, W., Oliveira, M.S.A. and Martins, N., Numerical study of compact heat exchanger performance using nanofluid, (2017), Ciência 2017 - International Conference of Science and Technology, Lisbon, Portugal, (3-5 July).
Ivanov, A.I., Kolotygin, V.A., Tsipis, E.V., Bredikhin, S.I. and Kharton, V.V., Thermal expansion, electrical conductivity and electrochemical properties of PrBaFe2-xNixO5+δ perovskites, (2017), All-Russian Conference with International Participation "Solid Oxide Fuel Cells and power plants on their basis", Suzdal, Russia, (25-29 June).
Yang, T., Da Silva, E.L., Pukazhselvan, D., Santos, M.C., Ramasamy, D., Mikhalev, S.M., Shaula, A. and Fagg, D.P., DFT+U study for the explanation of the physico-chemical properties of Pr2O2SO4, (2017), 9th International Conference on Advanced Nanomaterials (ANM2017), Aveiro, Portugal, (19-21 July). 
Bola, M., Ramos, A. and Simões, J.A., Numerical predictions of strain distributions in total shoulder arthroplasty for several abduction angles, (2017), European Society of Biomechanics (ESB) Seville, Seville, Spain, (02 July).
Gabriel, B., Andrade-Campos, A., Moreira, G., Oliveira, J., Valente, R. and Neto, V., Excelência no Ensino de Engenharia na UA (E3@UA): Desafio técnico-societal integrador, (2017), Teaching Day’17, University of Aveiro, Portugal, (November 29th).
Neto, V., Gabriel, B. and Marques, P.A.A.P., Nanotechnology Usability Tool (NTU) for optimization of nano-based products, (2017), EuroNanoForum 2017, Valletta, Malta, (21 – 23 June).
Zeng, A., Shrestha, M., Neto, V., Gabriel, B. and Fan, Q.H., Plasma nitriding surface as passivation layer for silicon cathode used in photo-electrochemical water splitting, (2017), Materiais 2017, University of Aveiro, Portugal, (9-12 April).
Bdikin, I., Heredia, A. and Singh, B., Local ferroelectric properties of glycine/diphenylalanine nanotubes composites.
Cortijo, S., Álvarez-Fraga, L., Gonçalves, G., Vila, M., Aroso, M., Álvarez, P., Menéndez, R., Palomares, J., De Andrés, A. and Prieto, C., Carboxyl functionalization of CVD graphene for bio-molecules detection, (2017), EUROMAT-2017, Thessaloniki, Greece, (17-22 September).
Gonçalves, S.F., Gonçalves, G., Vila, M., Hortiguela, M.J., Rebelo, S., Loureiro, S., Eco-friendly profile of pegylated nanographene oxide synthesized for medical application, (2017), SETAC Europe 27th Annual Meeting, Brussels, Belgium, (7 - 11 May).
Cicuéndez, M., Flores, J., Hortigüela, M.J., Oliveira, H., Portolés, Mª.T., Vallet-Regí, M., Vila, M. and Duarte, I.F., Impact of nanographene oxide and laser hyperthermia on tumour cell metabolism: insights by NMR metabolomics, (2017), nanoPorTugal 2017, International Conference, Porto, Portugal, (February 01-03).
Meng, L. and Yang, T., A Detailed Study on the Fe-doped TiO2 Thin Films Induced by the Novel Pulsed Laser, ANM2017, Aveiro.
Yang, T. and Fagg, D., Evaluation of the CO2 Tolerant Cathode for Solid Oxide Fuel Cells: Praseodymium Oxysulfates/Ba0.5Sr0.5Co0.8Fe0.2O3-δ, (2017), ANM2017, Aveiro.
Yang, T. and Shi, S., Highly Branched Pt-Cu Nanodandelion with High Activity for Oxygen Reduction Reaction, (2017), ANM2017, Aveiro.
De Silva, E.L., Yang, T., Santos, M. and Fagg, D., DFT+U study for the explanation of the physio-chemical properties of Pr2O2SO4, (2017), ANM2017, Aveiro. 
Da Silva, E.L., Santos, M.C., Yang, T., Skelton, J.M., Parker, S.C. and Walsh, A., Translational Symmetry Breaking of Bilayer Graphene Systems, poster, (2017), ANM2017, Aveiro.
Tafidis, P., Exploring Crowdsourcing Information to Predict Traffic-Related Impacts, (2017), 17th International Conference on Environment and Electrical Engineering - IEEE EEEIC 2017, Milan, (6-9 June).
Fernandes, P. and Coelho, M.C., Turbo-Roundabouts Along Corridors: Analysis of Operational and Environmental Impacts, (2017), 96th Transportation Research Board Annual Meeting, Washington D.C. (EUA), (9 January).
Teixeira, J. and Coelho, M.C., Information Management for Smart and Sustainable Mobility, (2017), 96th Transportation Research Board Annual Meeting, Washington D.C. (EUA), (9 January).
Coelho, M.C., Promoting European Inter-Regional Cooperation to Achieve a Cooperative Road Transport System, (2017), 96th Transportation Research Board Annual Meeting, Washington D.C. (EUA), (9 January).
Fonseca, B., Fonseca, M.A. and Oliveira, M.S.A., Thermo-mechanical characterization of shape-memory polymeric nanocomposites, (2017), Materials 2017, Aveiro, Portugal, (9-12 April).
Duarte, I., Vesenjak, M. and Krstulović-Opara, L., Multifunctional foam filled tubes. Conferences on Cellular Materials, (2017), MatCel’2017 & DynMatCel´2017, University of Aveiro, (September 25-27).
Duarte, I. and Ferreira, J.M.F. Metal nanocomposite foams, (2017), Conferences on Cellular Materials, MatCel’2017 & DynMatCel´2017, University of Aveiro, (September 25-27).
Pinto, S.C., Pinto, R.J.B., Freire, C.S.R., Duarte, I., Vicente, R. and Marques, P.A.A.P., Hybrid structures based on cellular materials, (2017), Conferences on Cellular Materials, MatCel’2017 & DynMatCel´2017, University of Aveiro, (September 25-27).
Aquino, J., Rodrigues, T., Duarte, I. and Dias-de-Oliveira, J., Testing and modelling the behavior of metal foams, a path towards prediction and optimization, (2017), Conferences on Cellular Materials, MatCel’2017 & DynMatCel´2017, University of Aveiro, (September 25-27).


Apresentações Ciêntificas Nacionais
Convites

G. Vincze, Mechanical properties of materials - from lab experiments to industrial applications, (2017), II Jornadas Nacionais de Caracterização de Materiais, (January 24-26), at University of Aveiro, Portugal. 
Ramos, A., Estudos biomecânicos em torno da articulação temporomandibular, VI Jornadas de Biomecânica, (2017), Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, (19 of April). 
Coelho, M.C., Mobilidade Inteligente e Sustentável: Tendências, desafios e oportunidades, (2017), Jornadas Técnicas da Associação Nacional de Centros de Inspeção Automóvel, University of Aveiro, (25 October).
Coelho, M.C., Mobilidade Sustentável e Inteligente: Desafios e Oportunidades de Investigação Científica, (2017), Salão do Automóvel Híbrido e Elétrico, Porto, (13 October).
Coelho, M.C., Transportation Technology @ TEMA, (2017), Congresso Ciência 2017, Lisboa, (5 July).
Coelho, M.C., Plataforma Tecnológica da Bicicleta e Mobilidade Suave – Atividades e oportunidades de cooperação, (2017), Águeda, (7 April).
Coelho, M.C., Transportes @ DEM, Open Day DEM, (2017), University of Aveiro, (6 January).
Gabriel, B., Valente, R., Neto, V., Andrade-Campos, A. and Dias de Oliveira, J., Excelência no Ensino de Engenharia na UA – Capitalizar o potencial das pessoas, (2017), Seminário FICA - Ferramentas de Identificação e Combate ao Abandono, University of Aveiro, (7 of September).
Andrade-Campos, A., Redes de abastecimento de água - oportunidades para investigação, (2017), Short presentation in MSES OpenDay, University of Aveiro, (8 March).
Andrade-Campos, A., Modelling and Simulation in the Mechanical Department, (2017), Short presentation in the DEM OpenDay, Department of Mechanical Engineering, University of Aveiro, (6 January).


Apresentações Orais

Ramos, A. and Mesnard, M., Estudo numérico e experimental em côndilo cadavérico após colocação de implante temporomandibular, (2017), 7º Congresso Nacional de Biomecânica, pp:215-216, Paulo Flores et al., Guimarães, Portugal, (10 e 11 de February).
Dos Santos, M.P.S., Instrumented active implants: a new concept model, (2017), 7º Congresso Nacional de Biomecânica, Paulo Flores et al., Guimarães, Portugal, (10 e 11 de February).  
Mendes, J.C. and Alves, L.N., Utilização de dispositivos de onda acústica superficial (SAWs) na indústria transportadora, (2017), 7º Encontro Nacional da SPMet, Ordem dos Engenheiros, Lisbon, Portugal, (17 November).
Nóbrega, A.J., Girão, A.F., Marques, P.A.A.P. and Completo, A., Development of physiological collagen architecture through anisotropic nanofibrous polycaprolactone-collagen scaffold for cartilage tissue engineering, (2017), 7º Congresso Nacional de Biomecânica (CNB2017), Campus de Azurém of University of Minho, Guimarães, Portugal, (10 - 11 February).  
Coelho, M.C., A Investigação no Ensino-Aprendizagem em resposta ao Desafio Societal “Transportes Inteligentes, Ecológicos e Integrados”, (2017), Teaching Day 2017, (29 November).
Fernandes, P., Main Benefits and Limitations of Using Conventional Roundabouts And Turboroundabouts Along Corridors, (2017), 14.º Encontro do Grupo de Estudos de Transportes, Fátima, (21 February).
Coelho, M.C., Intelligent Transportation Systems to promote decarbonisation and sustainable mobility, (2017), 14.º Encontro do Grupo de Estudos de Transportes, Fátima, (20 February).
Bandeira, J., CISMOB – Cooperative information platform for low carbon and sustainable mobility, (2017), 14.º Encontro do Grupo de Estudos de Transportes, Fátima, (20 February).
Bahmankhah, B., Multi-Objective Optimization For Passengers’ Routing Using Passenger Car Vs. Bicycle, (2017), 14.º Encontro do Grupo de Estudos de Transportes, Fátima, (20 February).
Valente, R., Andrade-Campos, A., Duarte, I. and Dias de Oliveira, J., Virtual Labs for the Mechanical Engineering Industry, (2017), CIÊNCIA2017 - Encontro com a Ciência e a Tecnologia em Portugal, (3-5 July).


Apresentações em Póster

Ajeeb, W., Oliveira, M.S.A. and Martins, N., Heat transfer in micro heat exchangers operating with CNT based nanofluid: A numerical approach, (2017), Research Day 2017, University of Aveiro, Aveiro, Portugal, (13th June).
Girão, A.F., Gonçalves, G., Almeida, S.S., Completo, A. and Marques, P.A.A.P., Graphene oxide-collagen scaffold as a versatile microenvironment for mechanical stimulation on tissue Engineering, (2017), 7º Congresso Nacional de Biomecânica (CNB2017), Guimarães, Portugal, (10-11 February).
Cicuéndez, M., Oliveira, H., Portolés, Mª.T., Vallet-Regí, M., Vila, M. and Duarte, I.F., Nanographene oxide mediated hyperthermia effects on tumour cell metabolism, (2017), Research Day 2017, University of Aveiro, Portugal, (June 13).
Coelho, M.C., A Investigação no Ensino-Aprendizagem – Resposta ao Desafio Societal “Transportes Inteligentes, Ecológicos e Integrados”, (2017), Teaching Day, University of Aveiro, (29 November).
Fernandes, P. and Coelho, M.C., Understanding roundabouts: Isolated or Together?, (2017), Encontro com a Ciência e Tecnologia em Portugal, Lisbon, (3-5 July).
Bahmankhah, B. and Coelho, M.C., Multi-objective Optimization For Passengers’ Routing Using Car/Bicycle, (2017), Encontro com a Ciência e Tecnologia em Portugal, Lisbon, (3-5 July).
Fernandes, P. and Coelho, M., Understanding Roundabouts: Together or isolated?, (2017), Research day 2017, University of Aveiro, (13 June).
Teixeira, J., Information Management for Smart and Sustainable Mobility, (2017), 14.º Encontro do Grupo de Estudos de Transportes, Fátima, (21 February).
Duarte, I., Vesenjak, M. and Krstulović-Opara, L., Espumas metálicas e metais celulares para aplicações em engenharia, (2017) Materiais e habitat, E-Poster 9/11, Techdays 2017, (12-14 of October).
Pinto, S.C., Marques, P.A.A.P., Duarte, I. and Vicente, R., Cellular materials/graphene nanostructures with promising insulating and fire-retardant properties, (2017), Research day 2017, University of Aveiro, (June 13).

última atualização a 23-10-2018
Este sítio web utiliza cookies sem recolher informação pessoal que permita a identificação dos utilizadores. Ao navegar neste sítio está a consentir a sua utilização.saber mais
Para que esta página funcione corretamente deve ativar a execução de Javascript. Se tal não for possível, algumas funcionalidades poderão estar limitadas.