40 anos da UA
via aberta

information for...
 

publications 2008

Books

> Boyd, A, Khyrandish, H, Milne, W, Lou,J, Gracio J et al, “Emerging  Nanotechnologies for manufacturing”, William Andrew Applied Science Publishers, 2008.

> Davim, J.P,” Machining Fundamentals and Recent Advances”,Springer, London, 2008 ISBN: 978-1-84800-212-8

> Davim, J.P., “Princípios da Maquinagem”, Publindustria, Porto, 2008 (in Portuguese) ISBN: 978-972-8953-24-9


Book Chapters

> Astakhov, Viktor P., Davim, J.P., “Tools (geometry and material) and tool wear”, Chapter 2, (29-57) in Davim, J.P. (Ed.),  Machining: Fundamentals and Recent Advances, Springer, London, 2008 ISBN: 978-1-84800-212-8

> Cazacu, O., Barlat, F., “Modeling plastic anisotropy and strength differential effects in metallic materials”, Multiscale modeling of heterogeneous materials: From microstructure to macro-scale properties, Cazacu, O., (Ed.), ISTE Ltd and John Wiley Inc., pp. 71-87

> Oliveira, J.A., Pinho-da-Cruz, J.,Teixeira-Dias, F., “Prediction of Mechanical Properties of Composite Materials by Asymptotic Expansion Homogenisation”, Computational Methods in Applied Sciences, Vol. 10 - Mechanical Response of Composites - ECCOMAS Series, P.P. Camanho, C.G. Dávila, S.T. Pinho, J.J.C. Remmers (Eds.), pp. 223 -242, Springer + Business, Media B.V., Dordrecht, Países Baixos

> Sousa ACM, Nabovati A, “LBM mesoscale modelling of porous media”, Advanced Computational Methods and Experiments in Heat Transfer, X  Book Series: WIT Transactions on Engineering Sciences,   Volume 61, 59-68, 2008


Refereed International Journal Papers

> Abrao, A. M., Campus Rubio, J., Faria,P. E., Davim J.P., “The effect of cutting tool geometry on thrust force and delamination when drilling glass fibre reinforced plastic composite”, Materials & Design,   Vol 29, Issue 2, 508-513,  2008

> Afgan, Naim H.,  Carvalho, Maria G.,  Pilavachi,P,  Martins N,  “Evaluation of Natural Gas Supply Options for South-East and Central Europe – Part 2: Multi-criteria Assessment”, Energy Conversion and Manegment International Journal, Vol 49/8, 2008, pp 2345-2353

> Ahzi S, M'Guil S, “A new intermediate model for polycrystalline viscoplastic deformation and texture evolution”, ACTA MATERIALIA   Vol 56   Issue  19   Pages  5359-5369  NOV 2008

> Andrade-Campos, A., Teixeira-Dias, F., Krupp,U., Barlat, F., Rauch E.F e Grácio J., “Effect of strain rate, adiabatic heating and phase transformation phenomena on the mechanical behaviour of stainless steel”, Strain, doi: 10.1111/j.1475-1305.2008.00572, 2008

> Antonio CAC, Davim JP, Lapa V, “Artificial neural network based on genetic learning for machining of polyetheretherketone composite materials”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY   Volume: 39   Issue: 11-12   Pages: 1101-1110   Published: DEC 2008

> Basavarajappa S, Chandramohan G, Davim JP, “Some studies on drilling of hybrid metal matrix composites based on Taguchi techniques”, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY   Volume: 196   Issue: 1-3   Pages: 332-338   Published: JAN 21 2008

> Basavarajappa S.,  Chandramohan G.,  Davim JP,  Prabu M, Mukund K,  Ashwin M, Prasannakumar M, “Drilling of hybrid aluminium matrix composites”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY   Volume: 35   Issue: 11-12   Pages: 1244-1250    FEB 2008

> Cabral G, Reis P, Titus E, Madaleno JC.,Davim J.P, Grácio J, Ahmed, W,. Jackson, M. J “Impact of surface roughness of diamond coatings on the cutting performance when dry machining of graphite”, International Journal of Manufacturing Technology and Management, Inderscience, 15-2, 2008, (121-152)

> Cabral G, Gabler J, Lindner J, et al., “A study of diamond film deposition on WC-Co inserts for graphite machining: Effectiveness of SiC interlayers prepared by HFCVD”, DIAMOND AND RELATED MATERIALS   Volume: 17   Issue: 6   Pages: 1008-1014    JUN 2008

> Cabral G, Titus E, Misra DS, et al, Selective Growth of Vertically Aligned Carbon Nanotubes by Double Plasma Chemical Vapour Deposition Technique, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY   Vol 8   Issue 8   4029-4032    AUG 2008

> Calisto H, Martins N, Afgan N, “Diagnostic system for boilers and furnaces using CFD and neural networks", EXPERT SYSTEMS WITH APPLICATIONS   Vol 35   Issue: 4    1780-1787, NOV 2008

> Cardoso, R.P.R, Yoon J.W., “One point quadrature shell elements. A study on convergence patch tests”, Computational Mechanics, Vol.40, pp.871-883 (2008).

> Cardoso, R.P.R, Yoon J.W, Mahadika, M., Choudhry,S.,  Alves de Sousa, Valente R.A.F, “Enhanced Assumed Strain (EAS) and Assumed Natural Strain (ANS) Methods for One-Point Quadrature Solid-Shell Elements”, Int. J. Numerical Methods in Eng., Vol.75, pp.156-187 (2008)

> Clemente, C. M., Martins, N., Simões, J. A, “Numeric Study of Pmma Flow on a Small Dimension Channel: a First Approach”, Materials Science Forum Vols. 587-588 (2008) pp 726-730, online at http://www.scientific.net 

> Coelho MC, Titus E, Cabral G, et al., “Hydrogen Adsorption onto Nickel Modified Carbon Nanotubes”, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY,   Volume: 8   Issue: 8   Pages: 4023-4028,  2008

> Completo A, Fonseca F, Simoes JA, “Strain shielding in proximal tibia of stemmed knee prosthesis: Experimental study”, JOURNAL OF BIOMECHANICS   Volume: 41   Issue: 3   Pages: 560-566   Published: 2008

> Completo A, Simoes JA, Fonseca F, “Experimental Evaluation of Strain Shielding in Distal Femur in Revision TKA”, EXPERIMENTAL MECHANICS   Volume: 48   Issue: 6   Pages: 817-824    DEC 2008

> Completo A, Simoes JA, Fonseca F, et al, “The influence of different tibial stem designs in load sharing and stability at the cement-bone interface in revision TKA”, KNEE   Volume: 15   Issue: 3   Pages: 227-232    JUN 2008

> Correia JPM, Siddiqui MA, Ahzi S, et al, “A simple model to simulate electromagnetic sheet free bulging process”, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES   Volume: 50   Issue: 10-11   Pages: 1466-1475   OCT-NOV 2008

> Chivrac, F.,  Gueguen, O., Pollet, E., Ahzi, S.,  Makradi, A.,  Averous, L., “Micromechanical modeling and characterization of the effective properties in starch-based nano-biocomposites”, ACTA BIOMATERIALIA   Volume: 4   Issue: 6   Pages: 1707-1714  NOV 2008

> Costa VAF, “Bejan's Thermodynamics for the heat transfer man, and the law of volume increase”, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER   Volume: 51   Issue: 11-12   Pages: 2877-2888   Published: JUN 2008

> Costa VAF, “Volume balance equation, availability analysis and the fundamental relation in the thermodynamics for the heat transfer man”, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER   Volume: 51   Issue: 11-12   Pages: 2871-2876   Published: JUN 2008

> Costa VAF, Ferreira JAF, Igreja RAAT, et al., “Modeling and simulation of a thermostatic mixer with an anti-scalding or anti-cold system”, INTERNATIONAL JOURNAL OF THERMAL SCIENCES   Volume: 47   Issue: 7   Pages: 903-917   Published: JUL 2008

> Costa VAF, Mendonca ML, Figueiredo AR, “Modeling and simulation of wetted porous thermal barriers operating under high temperature or high heat flux”, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,   Vol 51   Issue: 13-14,  3342-3354   2008

> Costa VAF, Oliveira LA, Baliga BR, “Implementation of the stress jump condition in a control-volume finite-element method for the simulation of laminar coupled flows in adjacent open and porous domains”, NUMERICAL HEAT TRANSFER PART B-FUNDAMENTALS   Volume: 53   Issue: 5   Pages: 383-411, 2008

> da Rocha AB, Santos AD, Teixeira P, et al, “Plastic instability in complex strain paths and finite element simulation for localised necking prediction in sheet metal forming technology”, INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY   Volume: 32   Issue: 4   Pages: 434-446    2008

> Davim JP, Special issue: “Advances in machining of composite materials”, INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY   Volume: 32   Issue: 2-3   Pages: 117-117    2008

> Davim JP, Barricas N, Conceicao M, et al., “Some experimental studies on CO2 laser cutting quality of polymeric materials”, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY   Volume: 198   Issue: 1-3   Pages: 99-104  2008

> Davim JP, Clemente VC, Silva S, “Drilling investigation of MDF (medium density fibreboard)”, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY   Volume: 203   Issue: 1-3   Pages: 537-541    JUL 18 2008

> Davim JP, Gaitonde VN, Karnik SR, „An investigative study of delamination in drilling of medium density fibreboard (MDF) using response surface models”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY   Volume: 37   Issue: 1-2   Pages: 49-57    APR 2008

> Davim JP, Gaitonde VN, Karnik SR, „Investigations into the effect of cutting conditions on surface roughness in turning of free machining steel by ANN models”, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY   Volume: 205   Issue: 1-3   Pages: 16-23    AUG 26 2008

> Davim JP, Maranhao C, Jackson MJ, et al,  FEM analysis in high speed machining of aluminium alloy (Al7075-0) using polycrystalline diamond (PCD) and cemented carbide (K10) cutting tools”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY   Volume: 39   Issue: 11-12   Pages: 1093-1100    DEC 2008

> Davim JP, Mata F, “Chemical vapour deposition (CVD) diamond coated tools performance in machining of PEEK composites”, MATERIALS & DESIGN   Volume: 29   Issue: 8   Pages: 1568-1574    2008

> Davim JP, Oliveira C, Barricas N, et al., “Evaluation of cutting quality of PMMA using CO2 lasers”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY   Volume: 35   Issue: 9-10   Pages: 875-879  JAN 2008

> Davim JP, Oliveira C, Cardoso A, “Predicting the geometric form of clad in laser cladding by powder using multiple regression analysis (MRA)”, MATERIALS & DESIGN   Volume: 29   Issue: 2   Pages: 554-557   2008

> Davim JP, Santos E, Pereira C, et al., “Comparative study of friction behaviour of alumina and zirconia ceramics against steel under water lubricated conditions”, INDUSTRIAL LUBRICATION AND TRIBOLOGY   Volume: 60   Issue: 4, 178-182, 2008

> Davim, J. Paulo, Gaitonde, V. N. Karnik, S. R. “An investigative study  drilling of medium-density fibreboard (MDF) using response surface models”, International Journal of Advanced Manufacturing Technology, Springer, 37, 1-2, (2008), 49-57.

> de Morais AB, Pereira AB, “Mixed mode II+III interlaminar fracture of carbon/epoxy laminates”, COMPOSITES SCIENCE AND TECHNOLOGY   Volume: 68   Issue: 9   Pages: 2022-2027   Published: JUL 2008

> de Sousa RJA, Correia JPM, Simoes FJP, et al., “Unconstrained springback behavior of Al-Mg-Si sheets for different sitting times”, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES   Volume: 50   Issue: 9   Pages: 1381-1389    SEP 2008

> Dong L, Makradi A, Ahzi S, et al, “Simulation of the densification of semicrystalline polymer powders during the selective laser sintering process: Application to Nylon 12”, POLYMER SCIENCE SERIES A   Volume: 50   Issue: 6   Pages: 704-709  JUN 2008

> Dongsheng Li, Garmestani, H.,  Chu, A. O., Ahzi, H., Alapati, G., Khatonabadi, M.,  Es-Said, O., Siniawski, M. T., Matrisciano L., and Ahzi, S.,  “Wear resistance and microstructure in annealed ultra high molecular weight polyethylenes”, Polymer Science Series A, Vol. 50, No. 5, pp. 533–537, 2008

> Fiedler T, Ochsner A, “On the anisotropy of adhesively bonded metallic hollow sphere structures”, SCRIPTA MATERIALIA   Volume: 58   Issue: 8   Pages: 695-698,  2008

> Fiedler T, Solorzano E, Ochsner A, “Numerical and experimental analysis of the thermal conductivity of metallic hollow sphere structures”, MATERIALS LETTERS,   Vol 62   Issue: 8-9   Pages: 1204-1207, 2008

> Faria, P. E., Campos, R. F. , Abrao, A. M., Godoy, G. C. D.,  Davim, J. Paulo , “Thrust force and wear assessment when drilling glass fiber-reinforced polymeric composite”, JOURNAL OF COMPOSITE MATERIALS   Volume: 42   Issue: 14   Pages: 1401-1414    JUL 2008

> Gaitonde, V. N.,  Karnik, S. R., Mata, F., Davim JP, “Taguchi approach for achieving better machinability in unreinforced and reinforced polyamides”, JOURNAL OF REINFORCED PLASTICS AND COMPOSITES   Volume: 27   Issue: 9   Pages: 909-924    JUN 2008

> Gaitonde, V. N.,  Karnik, S. R, Campos Rubio, J, Esteves Correia, A,  Abrao, A.M.,  Davim JP, “Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites”, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY   Volume: 203   Issue: 1-3   Pages: 431-438    JUL 18 2008

> Gaitonde VN, Karnik SR, Davim JP, „Prediction and optimization of surface roughness in milling of medium density fiberboard (MDF) based on Taguchi orthogonal array experiments”, HOLZFORSCHUNG   Vol 62   Issue: 2   Pages: 209-214,  2008

> Gaitonde VN, Karnik SR, Davim JP,“ Selection of optimal MQL and cutting conditions for enhancing machinability in turning of brass”, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY   Volume: 204   Issue: 1-3   Pages: 459-464   Published: AUG 11 2008

> Gaitonde VN, Karnik SR, Davim JP, „Taguchi multiple-performance characteristics optimization in drilling of medium density fibreboard (MDF) to minimize delamination using utility concept”, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY   Volume: 196   Issue: 1-3   Pages: 73-78    JAN 21 2008

> Gaitonde VN, Karnik SR, Davim JP, „Prediction and minimization of delamination in drilling of medium-density fiberboard (MDF) using response surface methodology and Taguchi design”, MATERIALS AND MANUFACTURING PROCESSES   Vol 23   Issue: 3-4   Pages: 377-384,  2008

> Garcia-Martin S, Fagg DP, Irvine JTS, “Characterization of diffuse scattering in yttria-stabilized zirconia by electron diffraction and high-resolution transmission electron microscopy”, CHEMISTRY OF MATERIALS   Volume: 20   Issue: 18   Pages: 5933-5938, 2008

> Goncalves G, Marques PAAP, Trindade T, et al., « Superhydrophobic cellulose nanocomposites”, JOURNAL OF COLLOID AND INTERFACE SCIENCE   Vol 324   Issue 1-2   Pages: 42-46, 2008

> Gueguen, O, Richeton, J, Ahzi, S, Makradi, A “Micromechanically based formulation of the cooperative model for the yield behavior of semi-crystalline polymers”, ACTA MATERIALIA   Volume: 56   Issue: 7   Pages: 1650-1655   Published: APR 2008

> Gueguen, O, Ahzi, S, Belouettar S, Makradi, A, “Comparison of micromechanical models for the prediction of the effective elastic properties of semicrystalline polymers: Application to polyethylene”, Polymer Science, Ser. A, 2008, Vol. 50, No. 5, pp. 523–532

> Husson, C., Correia, J.P.M, Daridon, L., Ahzi, S., “Finite elements simulations of thin copper sheets blanking: Study of blanking parameters on sheared edge quality”, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY   Volume: 199   Issue: 1-3   Pages: 74-83   Published: APR 1 2008

> Jackson, M. J,   Whitfield, M. D,  Morrell, J. S.,  Ahmed, W, Davim, J. P., “Initial shear strain development during formation of nanostructured metal chips”, MATERIALS SCIENCE AND TECHNOLOGY   Volume: 24   Issue: 12   Pages: 1452-1461,  2008

> Jiang F, Sousa ACM, “Smoothed particle hydrodynamics modeling of transverse flow in randomly aligned fibrous porous media”, TRANSPORT IN POROUS MEDIA   Volume: 75   Issue: 1   Pages: 17-33   Published: OCT 2008

> Kim, K.J., Yang, D.Y, Yoon, J.W. , “Investigation of microstructure characteristics of commercially pure aluminum during equal channel angular extrusion”, Materials Science and Engineering A, Vol.485, pp.621-626 (2008)

> Kamiya S, Sekino H, Hanyu H, et al, “Damage evolution and fatigue debonding of diamond films under repeated loading”, SURFACE & COATINGS TECHNOLOGY   Volume: 203   Issue: 5-7   Pages: 726-729   Published: DEC 25 2008

> Karnik, S. R., Gaitonde, V. N., Mata, F. Davim, J. Paulo, “Investigative study on machinability aspects of unreinforced and reinforced PEEK composite machining using ANN model”, JOURNAL OF REINFORCED PLASTICS AND COMPOSITES   Volume: 27   Issue: 7   Pages: 751-768   Published: MAY 2008

> Karnik, S. R., Gaitonde, V. N., Rubio, J. C.,  Esteves Correia, A., Abrao, A. M.,  Davim, J. Paulo,  “Delamination analysis in high speed drilling of carbon fiber reinforced plastics (CFRP) using artificial neural network model”, MATERIALS & DESIGN   Volume: 29   Issue: 9   Pages: 1768-1776   Published: OCT 2008

> Kanagaraj S, Guedes RM; Varanda F; Oliveira, MSA and Simões; JAO, “Dynamic mechanical analysis of MWCNT/HDPE composites”, Journal of Nanoscience and Nanotechnology, Vol.8, 1–5, 2008

> Kanagarajan, D., Karthikeyan, R. Palanikumar, K. Davim, J. Paulo,  „Optimization of electrical discharge machining characteristics of WC/Co composites using non-dominated sorting genetic algorithm (NSGA-II)”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY   Vol 36   Issue: 11-12, 1124-1132,  APR 2008

> Khamlichi,A., Bezzazi, M, Jabbouri, A., Reis P., and Davim, JP., “Optimizing friction behavior of clutch facings using pin-on-disk test”, International Journal of Physical Sciences,  Vol 3   Issue 2, 65-70,  Feb 2008

> Karnik SR, Gaitonde VN, Davim JP, „A comparative study of the ANN and RSM modeling approaches for predicting burr size in drilling”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,  Volume: 38   Issue: 9-10   Pages: 868-883  SEP 2008

> Kim JH, Lee MG, Barlat F, et al., “An elasto-plastic constitutive model with plastic strain rate potentials for anisotropic cubic metals”, INTERNATIONAL JOURNAL OF PLASTICITY   Volume: 24   Issue: 12   Pages: 2298-2334, 2008

> Krishnaraj V, Vijayarangan S, Davim JP, “An experimental and statistical study on the effect of drill geometries on force and hole quality in drilling of glass fibre reinforced plastic”, INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY   Volume: 32   Issue: 2-3   Pages: 264-275, 2008

> Lage, J. L., Anderson, R., Costa, V.  Errera, M. R., Fowler, A. J. Gosselin, L.,  Kimura, S. , Ledezma, G. A., Lim, J. S, et al, “Professor Adrian Bejan on his 60th birthday”, International Journal of Heat and Mass Transfer, Vol. 51, Issues 25-26, pp. 5759-5761, 2008

> Liujie X, Cardoso R, Davim JP, “Modelling of tribological behaviours of composite PEEK-CF30 using BP neural networks”, MATERIALS SCIENCE-POLAND   Volume: 26   Issue: 3   Pages: 495-504, 2008

> Madaleno JC, Pereira L, Lavareda G, et al, “A MIS transistor using the nucleation surface of polycrystalline diamond”, DIAMOND AND RELATED MATERIALS   Volume: 17   Issue: 4-5   Special Issue: Sp. Iss. SI   Pages: 768-771, 2008

> Madaleno JC, Singh MK, Titus E, et al., “Electron field emission from patterned nanocrystalline diamond coated a-SiO2 micrometer-tip arrays”, APPLIED PHYSICS LETTERS   Volume: 92   Issue: 2 Article Number: 023113, 2008

> Madureira, L.R. de Melo FJMQ, “A mixed formulation for stress analysis of curved pipes with tangent terminations under in-plane forces”, International Journal of Mechanics and Materials in Design (Elsevier), Volume 4, Number 2 / June, 2008

> Marques AT, de Morais AB, Special issue – “Fracture of composite materials” – Foreward, ENGINEERING FRACTURE MECHANICS   Volume: 75   Issue: 9   Pages: 2583-2583   Published: JUN 2008

> Marques PAAP, Nogueira HIS, Pinto RJB, et al., “Silver-bacterial cellulosic sponges as active SERS substrates”, JOURNAL OF RAMAN SPECTROSCOPY   Volume: 39   Issue: 4   Pages: 439-443   Published: APR 2008

> Mata F, Davim JP, “Multi-parameter surface roughness analysis in turning of polyamide composite using Polycrystalline Diamond tool”, INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY   Volume: 32   Issue: 2-3   Pages: 295-307   Published: 2008

> Mata F., and Davim, J. Paulo,  “Machinability aspects of composite PA66-GF30 using polycrystalline diamond (PCD) and cemented carbide (K10)”, Anales de Ingenieria Mecánica, Revista de la Asociación Espanõla de Ingeniéria Mecânica, Vol. 1 Año 16, (479-484), 2008

> Makradi, A. Ahzi,S., Belouettar S., and Ruch, D., “Thermoforming process of semicrystalline polymeric sheets: Modeling and finite element simulations”, Polymer Science, Series  A, Vol. 50, No. 5, pp. 550–55, 2008

> Mazaheri M, Hesabi ZR, Sadrnezhaad SK, “Two-step sintering of titania nanoceramics assisted by anatase-to-rutile phase transformation”, SCRIPTA MATERIALIA   Volume: 59   Issue: 2   Pages: 139-142    JUL 2008

> Mikdam A, Makradi A, Ahzi S, et al, “Effective conductivity in isotropic heterogeneous media using a strong-contrast statistical continuum theory”, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS   Volume: 57   Issue: 1   Pages: 74-86   Published: JAN 2009

> Misra DS, Titus E, “Selected Peer-Reviewed Articles from the Conference on Advanced Nano-Materials 2007 (ANM 2007)”, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY   Volume: 8   Issue: 8   Pages: 4007-4007    AUG 2008

> Nabovati, A. and Sousa, A.C.M., “Fluid flow simulation at open-porous medium interface using the Lattice Boltzmann Method”, Int. J. Numer. Meth. Fluids, 56, 2008, 1449-1456

> Neto VF, Oliveira MSA, Ali N, et al., “Time-modulated chemical vapour deposition diamonf on mould making 2738 steel”, VACUUM   Volume: 82   Issue: 12   Pages: 1346-1349   Published: AUG 8 2008

> Neto VF, Vaz R, Ali N, et al, “Diamond coatings on 3D structured steel”, DIAMOND AND RELATED MATERIALS   Volume: 17   Issue: 7-10   Special Issue: Sp. Iss. SI   Pages: 1424-1428   Published: JUL-OCT 2008

> Neto VF, Vaz R, Ali N, et al., “Performance of sub-micron diamond films coated on mould inserts for plastic injection moulding”, JOURNAL OF MATERIALS SCIENCE   Volume: 43   Issue: 10   Pages: 3392-3399   Published: MAY 2008

> Neto, VF; Shokuhfar, T; Oliveira, MSA; Grácio, J; Ali, N, “Polycrystalline diamond coatings on steel substrates”, International Journal of Nanomanufacturing, Vol. 2, Nos. 1/2, pp. 99-115, 2008.. DOI: 10.1504/IJNM.2008.017842 

> Neto, VF; Vaz, R; Ghumman, CAA; Teodoro, OMND; Ali, N; Oliveira, MSA and Grácio, J., “Carbon diffusion into steel during diamond chemical vapour deposition”, International Journal of Nanomanufacturing, Vol. 2, No. 3, pp.192–203, 2008

> Neto, VF; Vaz, R; Oliveira, MSA; Grácio, J., “CVD diamond coated steel inserts for thermoplastic mould tools – characterization and preliminary performance evaluation”, Journal of Materials Processing Technology, (Article accepted for publication: 14-MAR-2008 Accepted manuscript: Available online DOI: 10.1016/j.jmatprotec.2008.03.012

> Oliveira LA, Costa VAF, Baliga BR, “Numerical model for the prediction of dilute, three-dimensional, turbulent fluid-particle flows, using a Lagrangian approach for particle tracking and a CVFEM for the carrier phase”, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS   Volume: 58   Issue: 5   Pages: 473-491   Published: OCT 20 2008

> Ostermeyer M, Kong HJ, Kovalev VI, et al, « Trends in stimulated Brillouin scattering and optical phase conjugation”, LASER AND PARTICLE BEAMS   Volume: 26   Issue: 3  Pages: 297-362   Published: SEP 2008

> Ouadoudi, N, Oussouaddi, O, Daridon, L., Ahzi, S., Chrysochoos, A,  “Influence of dissipated energy on adiabatic shear band spacing: Influence de l’énergie dissipée sur la formation des bandes de cisaillement adiabatique multiples , Physical and Chemical News, Vol 39, 2008, pp.75-81

> Palanikumar K, Mata F, Davim JP, “Analysis of surface roughness parameters in turning of FRP tubes by PCD tool”, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY   Volume: 204   Issue: 1-3   Pages: 469-474   Published: AUG 11 2008

> Palanikumar K, Rubio JC, Abrao AM, et al., “Influence of Drill Point Angle in High Speed Drilling of Glass Fiber Reinforced Plastics”, JOURNAL OF COMPOSITE MATERIALS   Volume: 42   Issue: 24   Pages: 2585-2597   Published: DEC 2008

> Palanikumar,K., Campos Rubio, J., Abrao, A. M.,  Esteves Correia, A., Davim, J. P, “Statistical analysis of delamination in drilling glass fiber-reinforced plastics (GFRP)”, JOURNAL OF REINFORCED PLASTICS AND COMPOSITES   Volume: 27   Issue: 15   Pages: 1615-1623,  2008

> Palanikumar K, Sivakumar G, Davim JP, “Development of an empirical model for surface roughness in the machining of Al/SiC particulate composites by PCD tool”, INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY   Volume: 32   Issue: 2-3   Pages: 318-332   Published: 2008

> Petropoulos,G, Ntziantzias,I, Reis, P, Davim, JP “Predicting machinability parameters on drilling Glass Fibre Reinforced Plastics using Response Surface Methodology”, INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY,  Vol 32   Issue: 2-3   Pages: 243-263,  2008

> Petropoulos G, Mata F, Davim JP, “Statistical study of surface roughness in turning of peek composites”, MATERIALS & DESIGN   Volume: 29   Issue: 1   Pages: 218-223   Published: 2008

> Pereira AB, De Morals AB, „Mixed mode I plus II interlaminar fracture of carbon/epoxy laminates”, COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING   Volume: 39   Issue: 2   Pages: 322-333   Published: 2008

> Pessey D, Bahlouli N, Ahzi S, et al, “Strain rate effects on the mechanical response of polypropylene-based composites deformed at small strains”, POLYMER SCIENCE SERIES A   Volume: 50   Issue: 6   Pages: 690-697   Published: JUN 2008

> Pessey D, Bahlouli N,  Ahzi S, Pattofatto S,  “Polymer composites for the automotive industry: characterisation of the recycling effect on the strain rate sensitivity”, INTERNATIONAL JOURNAL OF CRASHWORTHINESS   Volume: 13   Issue: 4  411-424  2008

> Pinto RJB, Marques PAAP, Barros-Timmons AM, et al, “Novel SiO2/cellulose nanocomposites obtained by in situ synthesis and via polyelectrolytes assembly”, COMPOSITES SCIENCE AND TECHNOLOGY   Volume: 68   Issue: 3-4   Pages: 1088-1093   Published: MAR 2008

> Plunkett B, Cazacu O, Barlat F, “Orthotropic yield criteria for description of the anisotropy in tension and compression of sheet metals”, INTERNATIONAL JOURNAL OF PLASTICITY   Volume: 24   Issue: 5   Pages: 847-866   Published: 2008

> Pourboghrat, F., Guan, Y., Barlat, F., “Finite element analysis of aluminum tube hydroforming based on non-quadratic yield function”, Int. J. Manufacturing Technology and Management 14, 84-99.

> Quiza R, Figueira L, Davim JP, “Comparing statistical models and artificial neural networks on predicting the tool wear in hard machining D2 AISI steel”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY   Volume: 37   Issue: 7-8   Pages: 641-648   Published: JUN 2008

> Rao, RV,  Davim JP,  “A decision-making framework model for material selection using a combined multiple attribute decision-making method", International Journal of Advanced Manufacturing  Technology, Springer, 35, 7-8, (2008), 751-760

> Ramos, A. e Simões, J. A., “CAD-CAM-RTV-Lost wax casting technology for medical implants”, Rapid Prototyping Journal, (submitted RPJ-04-2008-0022)

> Ramos, A. e Simões, J. A., “In vitro fatigue crack analysis of the Lubinus SPII cemented hip stem”, Engineering Failure Analysis, 2008

> Ramos, A. e Simões, J. A., “In Vitro fatigue crack Damage of a Lubinus SPII and Charnley cemented hip, cement thickness and geometry influence on fatigue behaviour”, Journal of Biomechanics, (submitted BM-D-08-00763), 2008

> Rubio JC, Abrao AM, Faria PE, et al., “Effects of high speed in the drilling of glass fibre reinforced plastic: Evaluation of the delamination factor”, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, Elsevier   Volume: 48   Issue: 6   Pages: 715-720   Published: MAY 2008

> Rubio, J. Campos,  Abrao, A. M.,  Faria, P. E.  Esteves Correia, A., Davim, J. Paulo, “Delamination in high speed drilling of carbon fiber reinforced plastic (CFRP)”, JOURNAL OF COMPOSITE MATERIALS,   Vol 42   Issue: 15   Pages: 1523-1532,  2008

> Silva, L. R., Abrao, A. Rubio J., Davim, J. P,  “A note on the influence of cutting speed on cutting forces and surface finish during precision turning of AISI 1045 steel”, Journal of Engineering: Annals of Faculty of Engineering Hunedoara, 5 (2), 2008, (113-118).

> Siddiqui, MA., Correia, J.P.M., Ahzi S., Belouettar, S., “A numerical model to simulate electromagnetic sheet metal forming process”,International Journal of Material Forming, Vol. 1, pp. 1387-1390, 2008

> Singh, M.K.,  Shokuhfar, T.,  Gracio, J.J. , De Sousa, ACM., Fereira, J. M., Garmestani H., and Ahzi, S.,  “Hydroxyapatite modified with carbon-nanotube-reinforced poly(methyl methacrylate): A nanocomposite material for biomedical applications”, ADVANCED FUNCTIONAL MATERIALS   Volume: 18   Issue: 5   Pages: 694-700   Published: MAR 11 2008

> Spieckermann, F., Wilhelm, H., Schafler, E., Ahzi, S., Zehetbauer, M.J. „Application of composite models to isotactic polypropylene for the determination of phase specific stress–strain curves”, Materials Science and Engineering: A, Volumes 483-484, 15, Pages76-78,  2008

> Simoes FJP, de Sousa RJA, Gracio JJA, et al., “Mechanical behavior of an asymmetrically rolled and annealed 1050-O sheet”, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES   Volume: 50   Issue: 9   Pages: 1372-1380   Published: SEP 2008

> Singh MK, Titus E, Madaleno JC, et al, “Novel two-step method for synthesis of high-density nanocrystalline diamond fibers”, CHEMISTRY OF MATERIALS   Volume: 20   Issue: 5   Pages: 1725-1732   Published: MAR 11 2008

> Singh MK, Titus E, Madaleno JC, et al., “Nanocrystalline diamond on SiO2 fiber: A new class of hybrid material”, DIAMOND AND RELATED MATERIALS   Volume: 17   Issue: 7-10   Special Issue: Sp. Iss. SI   Pages: 1106-1109   Published: JUL-OCT 2008

> Soares S, Yoon JW, Cazacu O, “On the use of homogeneous polynomials to develop anisotropic yield functions with applications to sheet forming”, INTERNATIONAL JOURNAL OF PLASTICITY   Volume: 24   Issue: 6   Pages: 915-944   Published: 2008

> Shokuhfar,T,  Makradi, A. Titus, E, Cabral, E, Ahzi,S Sousa, A.C.M, Belouettar S. and Gracio,J “Prediction of the Mechanical Properties of Hydroxyapatite/Polymethyl Methacrylate/Carbon Nanotubes Nanocomposite”, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY   Volume: 8   Issue: 8   Pages: 4279-4284   Published: AUG 2008

> Stoughton, T.B.,  Yoon, J.W. “On the existence of indeterminate solutions to the equations of motion under non-associated flow”, Int. J. Plasticity, Vol.24, pp.583-613(2008)

> Tang CJ, Fu LS, Fernandes AJS, et al., “Simultaneous formation of silicon carbide and diamond on Si substrates by microwave plasma assisted chemical vapor deposition”, NEW CARBON MATERIALS   Volume: 23   Issue: 3   Pages: 250-258   Published: SEP 2008

> Tang CJ, Gracio J, Fernandes AJS, et al., “Simultaneous fabrication of nanocrystalline and {100} textured large-grained diamond films”, VACUUM   Volume: 83   Issue: 2   Pages: 340-345   Published: SEP 26 2008

> Tang CJ, Neves AJ, Gracio J, et al., “A new chemical path for fabrication of nanocrystalline diamond films”, JOURNAL OF CRYSTAL GROWTH   Volume: 310   Issue: 2   Pages: 261-265   Published: JAN 15 2008

> Tang CJ, Neves AJ, Pereira S, et al, “Effect of nitrogen and oxygen addition on morphology and texture of diamond films (from polycrystalline to nanocrystalline)”, DIAMOND AND RELATED MATERIALS   Volume: 17   Issue: 1   Pages: 72-78   Published: JAN 2008

> Titus E, Cabral G, Madaleno JC, et al., “Hydrogen in Chemical Vapour Deposited Carbon Nanotubes: An Active Site for Functionalization”, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY   Volume: 8   Issue: 8   Pages: 4017-4022   Published: AUG 2008

> Valente RAF, Jorge RMN, Roque AP, et al., “Simulation of dissimilar tailor-welded tubular hydroforming processes using EAS-based solid finite elements”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY   Volume: 37   Issue: 7-8   Pages: 670-689   Published: JUN 2008

> Xu LJ, Davim JP, “Modelling cutting power and tool wear in turning of aluminium matrix composites using Artificial Neural Networks”, INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY   Volume: 32   Issue: 2-3   Pages: 333-342   Published: 2008

> Zhil’tsova, T.V., Oliveira, M.S.A,  Ferreira, J.A.F. “Relative influence of injection molding processing conditions on HDPE acetabular cups dimensional stability”, Journal of Materials Processing Technology, vol 209, issue 8, April 09, Received 7 April 2008;  revised 2 September 2008;  accepted 4 September 2008.  Available online 25 September 2008


Refereed national Journal Papers

> Coelho, Margarida C., Farias, Tiago L. e Rouphail, Nagui M. “Avaliação do Desempenho do Tráfego Rodoviário em Interrupções de Tráfego e seu Impacte ao Nível das Emissões de Poluentes”, Revista “Ingenium”, Ordem dos Engenheiros, Março de 2008

> Coelho, Margarida Isabel Cabrita Marques, “Impactes dos Sistemas de Transportes em Portugal e nos EUA: um Fórum de Discussão”, “Urbanismo e Construção”, 1-15 de Abril de 2008.

> Oliveira, M., Santos V., “Combining View-based Object Recognition with Template Matching for the Identification and Tracking of Fully Dynamic Targets”, Robótica, (73):14-19, ISSN 0874-9019, 2008


Conference Proceedings papers

> Andrade-Campos, A. Ramos, A.,  Simões J., “A Model of Bone Adaptation as a Topology Optimization Process with Contact”,  Proc. International Conference in Engineering Optimization, Junho, Brasil, p.20 – 2008

> Barlat, F., “Material modeling for sheet forming applications”,  Sept 1-5, Interlaken, Switzerland, Hora, P., (ed.), ETH, Zürich, pp. 27-36, 2008

> Barlat, F., Ahn, D.C., Brem, J.C., Yoon, J.W., “A general anisotropic yield function reduced to plane stress”, Proceedings of the International Symposium on Automotive Sheet Metal Forming, Jamshedpur, India, December 17-18, Verma R.K., Bhattacharjee, D., (Eds.), Tata McGraw-Hill, Publishing Company Ltd, New Dehli, pp. 1-6.

> Branco, J., Carvalho, P., Martins N., “Estimativa do Coeficiente Global de Condução de Calor em Fachadas de  Edifícios”,  Curia, Portugal, Out 2008  

> Cardoso, R.P.R. , Yoon J.W., “Stress integration and material chracterization for a nonlinear kinematic hardening model”, Hawaii, Jan.3-8, USA, pp.10-12, 2008

> Carvalho,J. F., Cruz , P. S. , Valente,  R. A. F., Andrade-Campos, A, “An Integrated Methodology for Parameter Identification and Shape Optimization in Metal Forming and Structural Application”, Proceedings of the International Conference in Engineering Optimization, EngOpt2008,  1 a 5 de Junho, Brasil, p.75 – 2008

> Clemente CM, Martins N, Simoes JA, “Numeric Study of PMMA Flow on a Small Dimension Channel: a First Approach”, Conference Information: 13th Conference of the Sociedade-Portuguesa-de-Materiais/4th International Materials Symposium, APR 01-04, 2007 Oporto, ADVANCED MATERIALS FORUM IV, Book Series: MATERIALS SCIENCE FORUM, Volume: 587-588,    Pages: 726-730, 2008   

> Coelho, Margarida C., Soares Daniel,  &  Frey, H. Christopher, “Energy use and greenhouse gases emissions in vehicles: Contrasting alternative fuels, propulsion systems and market policies in Portugal and USA”, artigo aceite para apresentação na XV Pan-American Conference of Traffic and Transportation Engineering, realizada em Cartagena de Indias (Colômbia), Setembro de 2008

> Coelho, Margarida C. , Zhai, H , Frey, H. Christopher, Rouphail, N, & Pelkmans, Luc, “Assessment of Pollutant Emissions for Diesel Light-Duty Vehicles based on On-Board Measurements”, 5.º Encontro do Grupo de Estudos de Transportes, realizado em Mira, Janeiro de 2008

> Coelho, Margarida C. , Zhai, H , Frey, H. Christopher, Rouphail, N, & Pelkmans, Luc, “Integration of Vehicle Activity Into Emissions Estimation Based on On-Board Measurements for Diesel Light-Duty Vehicles”, comunicação em actas da 17th International Emission Inventory Conference, Portland (Oregon), Junho de 2008

> Coelho, Margarida Cabrita & Bastos, Luiz, “Avaliação do Consumo Energético de Veículos Híbridos”, comunicação em Actas do 1.º Congresso Nacional sobre Alterações Climáticas (Clima 2008), realizado em Aveiro, Setembro 2008

> Costa,V. A. F. , Ferreira, J. A. F. ,Igreja,  R. A. A. T. , Santos V. M. F., “Modelação e Simulação de uma Válvula Misturadora Termostática com Sistema Anti-Escaldão e Anti-Resfriado”, V. A. F. Costa (Ed.), Actas da II Conferência Nacional de Métodos Numéricos em Mecânica de Fluidos e Termodinâmica, Trabalho 12, que teve lugar em Aveiro (Portugal), a 08 e 09 de Maio de 2008

> D.C. Ahn, J.W. Yoon, Y.J. Chung, S.Y. Won, K.Y. Kim, “On the prediction pf formability of ferritic strainless steel sheet”, ICTP2008 edited by D.Y. Yang, Gyungju, Sept.7-11, Korea, pp.833 (2008)

> D.K. Ahn, J.W. Yoon, Y.J. Chung, S.Y. Won, K.Y. Kim, “Modelling of anisotropic behaviour of ferrite stainless steel sheets”, Proceeding of PLASTICITY 2008 edited by A.S. Khan, Kona, Hawaii, Jan.3-8, USA, pp.1-3 (2008)

> da Silva, L. R. ,Abrão,  A. M. , Faria, P. E. , Campos Rubio, J. , Davim J.P., “Influência da geometria da ferramenta na usinabilidade de aços na operação de torneamento de precisão”, V Congresso Nacional de Engenharia, Mecânica, Bahia, Brasil, pp.1-9, August 2008

> Davim,J. Paulo ,  Faria, P., Maranhão, C. , António C., “Finite element simulation of precision machining on AISI 1045 steel”, 5º Congresso Luso-Moçambicano de Engenharia, Maputo, Moçambique, pp.1-7(ref:25A003), September 2008

> de Morais, A. B. , Pereira A. B., “Interlaminar fracture under mixed-mode II + III and I + III”, 11th Japanese-European Symposium on Composite Materials, Faculdade de Engenharia da Universidade do Porto, September 2008

> de Moura MFSF, de Morais AB, “Equivalent crack based analyses of ENF and ELS tests, Conference Information”, Euromech Colloquium 473 on Fracture of Composite Materials, OCT 27-29, 2005 Oporto, PORTUGAL, ENGINEERING FRACTURE MECHANICS, Volume: 75   Issue: 9   Pages: 2584-2596   Published: JUN 2008

> Dias, P. ,Campos, G. , Santos, V., Casaleiro, R. Seco, R., Sousa Santos, B., “3D Reconstruction and Auralization of the "Painted Dolmen" of Antelas”, Proc. Electronic Imaging 2008 conference SPIE Vol 6805, Three-Dimensional Image Capture and Applications SPIE2008, San Jose, USA, 28-29 Jan, 2008

> Dick, R.E., Yoon J.W., Effect of strain hardening and anisotropy on wrinkling formation during dome forming of a beverage can, NUMISHEET2008, edited by P.Hora, Interlaken, Sept.1-5, Switzerland, pp.101-104 (2008)

> Dinis, J.,  Martins, N., “Análise do nível óptimo de isolamento térmico de edifícios residenciais em Portugal”, CINCOS’08 Congresso de Inovação na Construção Sustentável, Curia, Portugal Outubro/2008

> Ferreira, C. F., Dias, J., Santos V, “Merging Topological Maps for Localization in Large Environments”, The 11th International Conference on Clibing and Walking Robots and the Support Technologies for Mobile Machines CLAWAR2008, pp. 122-129, Coimbra, Portugal, 8-10 Sep, 2008

> Fiedler T, Ochsner A, “Experimental analysis of the flexural properties of sandwich panels with cellular core materials”, Conference Information: International Conference on Advanced Computational Engineering and Experimenting JUL 12-13, 2007 Algarve, MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK Volume: 39   Issue: 2   Pages: 121-124   Published: FEB 2008

> Fiedler T, Ochsner A, Belova IV, et al, “Calculations of the effective thermal conductivity in a model of syntactic metallic hollow sphere structures using a Lattice Monte Carlo method”, Conference Information: 3rd International Conference on Diffusion in Solids and Liquids, JUL 04-06, 2007 Algarve DIFFUSION IN SOLIDS AND LIQUIDS III , Book Series: DEFECT AND DIFFUSION FORUM, Volume: 273-276   Pages: 216-221    2008    

> Fiedler T, Ochsner A, Belova IV, et al, “Thermal conductivity enhancement of compact heat sinks using cellular metals”, Conference Information: 3rd International Conference on Diffusion in Solids and Liquids, JUL 04-06, 2007 Algarve, DIFFUSION IN SOLIDS AND LIQUIDS III  Book Series: DEFECT AND DIFFUSION FORUM   Volume: 273-276   Pages: 222-226   2008

> Filipe, C., Dias, J.,  Santos V, Direct Creation of Maps for Robot Localisation by Merging Topological Paths, Proc. 8th Conference on Autonomous Robot Systems and Competitions, ROBOTICA2008, pp. 15-19, Aveiro, Portugal, 2 April, 2008

> Grácio, J., Marques, P.A.A.P., Singh, M.K., Titus, E.  Coelho, M., Sousa A., “Nanobiocomposites for the next generation of biomedical implants”, comunicação em Actas do 8th World Biomaterials Congress, realizado em Amesterdão (Holanda), Maio de 2008

> Gueguen O, Ahzi S, Belouettar S, et al, “Comparison of micromechanical models for the prediction of the effective elastic properties of semicrystalline polymers: Application to polyethylene”, Conference Information: International Colloquium Structure-Sensitive Mechanices of Polymer Materials, Physical and Mechanical Aspects, OCT 10-13, 2006 Strasbourg, FRANCE, POLYMER SCIENCE SERIES A, Vol 50, issue 5, 523-532, May 2008

> Hong, S.H., Yoon, J.W., Han D.S., “Anisotropic material modeling for automotive sheet alloys”, NUMISHEET2008, edited by P.Hora, Interlaken, Sept.1-5, Switzerland, pp.105-110, 2008

> Horovistiz AL, Abrantes JCC, Fagg DP, et al, “Effects of Yb : Ti ratio on transport properties of Yb2 +/- xTi2 +/- xO7 +/-delta”, Conference Information 16th International Conference on Solid State Ionics, JUL 01-06, 2007 Shanghai, PEOPLES R CHINA, SOLID STATE IONICS, Volume: 179   Issue: 21-26   Pages: 1046-1049   Published: SEP 15 2008

> Kamiya S, Sekino H, Hanyu H, et al., “Damage evolution and fatigue debonding of diamond films under repeated loading”, Conference Information: 35th International Conference on Metallurgical Coatings and Thin Films, APR 28-MAY 02, 2008 San Diego, CA, SURFACE & COATINGS TECHNOLOGY, Volume: 203  Issue: 5-7   Pages 4008-4012, AUG 2008

> Kanagaraj S, Guedes RM, Oliveira MSA, et al, “Dynamic Mechanical Analysis of Multi-Walled Carbon Nanotube/HDPE Composites”, Conference Information: International Conference on Advanced Nano-Materials, JAN 08-10, 2007, Indian Inst Technol, Phys Dept, Bombay, INDIA, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, Volume: 8   Issue: 8   Pages 4008-4012   Published: AUG 2008

> Kanagaraj S, Varanda FR, Silva JAL, Fonseca A, Oliveira MSA and Simões JAO, “Rheological study of nanofluids at different concentration of carbon nanotubes”, 19th National & 8th ISHMT- ASME Heat and Mass Transfer (HMT) Conference”, Hyderabad, , Índia, Janeiro 2008

> Kanagaraj, S; Fonseca, A; Ferreira, JMF; Oliveira, MSA; and Simões JAO, Optimization of ball-milling time and cooling technique on mechanical properties of ultrahigh molecular weight polyethylene – carbon nanotubes nanocomposites, ANM 2008, 2nd International Conference on Advanced Nano Materials, Aveiro, Portugal, 22 - 25 June 2008

> Kanagaraj, S; Fonseca, A; Oliveira, MSA; and Simões JAO, Mechanical properties of ultrahigh molecular weight polyethylene-multi walled carbon nanotubes nanocomposites for orthopaedic applications, 8th World Biomaterials Congress 2008, 28 May- 1June, Amsterdam 2008 (poster)

> Kim, D., Kim, K.J., Chung, K., Barlat, F., Hong, S.-H., Lee, J-Hwan, Formulation of forming limit diagram for sandwich sheet with anisotropic strain-rate potential, Proc. 7th International conference and Workshop on Numerical Simulations of Sheet Metal Forming Processes, (Numisheet 2008), Sept 1-5, Interlaken, Switzerland, Hora, P., (ed.), ETH, Zürich, pp. 337-342

> Kim, J.B., Yoon, J.W., Yang D.Y., An analysis of springback with bifurcation behavior and its application to die design, ICTP2008 edited by D.Y. Yang, Gyungju, Sept.7-11, Korea, pp.566 (2008).

> Kim, K.J.,  Yang,D.Y.,   Yoon J.W., Effect of die angle ans process route on the texture evolution and the microstructural change of commercially pure aluminium in the ECAE process, Proceeding of PLASTICITY 2008, edited by A.S. Khan, Kona, Hawaii, Jan.3-8, USA, pp.88-90 (2008)

> Kong HJ, Yoon JW, Shin JS, et al, Long-term stabilized two beam combination laser system with amplifiers using the phase controlled stimulated Brillouin scattering phase conjugate mirrors, art. no. 68740H, HIGH ENERGY/AVERAGE POWER LASERS AND INTENSE BEAM APPLICATIONS II, PHOTO-OPTICAL INSTRUMENTATION ENGINEERS (SPIE), Volume: 6874   Pages: H8740-H8740 2008

> Li DS, Garmestani H, Chu AO, et al., “Wear resistance and microstructure in annealed ultra high molecular weight polyethylenes,” Conference Information: International Colloquium Structure-Sensitive Mechances of Polymer Materials Physical and Mechanical Aspects, OCT 10-13, 2006 Strasbourg FRANCE, POLYMER SCIENCE SERIES A, Vol 50, issue 5, 533-537, May 2008

> Madaleno JC, Pereira L, Lavareda G, et al, “A MIS transistor using the nucleation surface of polycrystalline diamond”, Conference Information: International Conference on New Diamond and Nano Carbons, MAY 28-31, 2007 Osaka JAPAN, DIAMOND AND RELATED MATERIALS, Volume: 17   Issue: 4-5   Special Issue: Sp. Iss. SI   Pages: 768-771, APR-MAY 2008

> Makradi A, Ahzi S, Belouettar S, et al., “Thermoforming process of semicrystalline polymeric sheets: Modeling and finite element simulations”, Conference Information: International Colloquium Structure -Sensitive Mechanices of Polymer Materials, Physical and Mechanical Aspects, OCT 10-13, 2006 Strasbourg FRANCE POLYMER SCIENCE SERIES A, Vol 50, Issue 5, Pages 550-557, May 2008 

> Coelho, Margarida C., Soares, Daniel. & Frey, H. Christopher, “Europe and USA: Contrasting vehicles fleet, use of alternative fuels, energy consumption and greenhouse gases emissions”, comunicação em Actas da Conferência “Rethinking Transportation for a Sustainable Future”, realizada em Louisville (Kentucky), Outubro de 2008

> Mata F., Davim J.P., “Machinability aspects of composite PA66-GF30 using polycrystalline diamond (PCD) and cemented carbide (K10)”, XVII Congreso National de Ingeniería Mecánica, Gijon Espanha, pp. 14-15, February 2008

> Mendes, J. A. T.,  Costa, V. A. F., “Procedimento para Projecto de Sistemas de Escape para Veículos”, V. A. F. Costa (Ed.), Actas da II Conferência Nacional de Métodos Numéricos em Mecânica de Fluidos e Termodinâmica, Trabalho 12, que teve lugar em Aveiro, (Portugal), a 08 e 09 de Maio de 2008

> Monteiro R., Martins, N., “Optimização de Sistemas Solares Térmicos Recorrendo à sua Simulação Computacional em Regime Transitório”, CINCOS’08, Congresso de Inovação na Construção Sustentável, Curia, Portugal Outubro/2008

> Moreira R.A.S. e  Dias Rodrigues,  J., A, “Layerwise Finite Element With Through-Thickness Deformation”, 8th International Conference on Sandwich Structures (ICSS8), Porto, Portugal, May 6-8

> Moreira R.A.S. e  Dias Rodrigues,  J., “Multilayer Damping Treatments: Modeling And Experimental Assessment”, 8th International Conference on Sandwich Structures (ICSS8), Porto, Portugal, May 6-8

> Moreira, R.A.S.,Oliveira,  R.O. ,  Santos Silva,  J., Dias Rodrigues, J., Design and experimental assessment of a viscoelastic testing machine for viscoelastic material characterization, 7ºCongresso Nacional de Mecânica Experimental, APAET 2008, UTAD, Vila Real, Portugal, 23-25 Janeiro, pp. 49-51.

> Moreira,R.A.S.,  Fontes Valente  R. A.  and Alves de Sousa, R. J., “An Enhanced layerwise Finite Element Using a Robust Solid-Shell Formulation Approach”, 8th International Conference on Sandwich Structures (ICSS8), Porto, Portugal, May 6-8

> Neto VF, Oliveira MSA, Ali N, et al., “Time-modulated chemical vapour deposition diamonf on mould making 2738 steel”, Conference Information: 5th Iberian Vacuum Meeting SEP 18-21, 2005 Univ Minho, Guimaraes, PORTUGAL, VACUUM   Volume: 82   Issue: 12   Pages: 1346-1349   Published: AUG 8 2008

> Neto VF, Vaz R, Ali N, et al., “Performance of sub-micron diamond films coated on mould inserts for plastic injection moulding”, Conference Information: International Conference on Surfaces, Coatings and Nanostructured  Materials (NanoSMat), 2007 Algarve, PORTUGAL, JOURNAL OF MATERIALS SCIENCE   Volume: 43   Issue: 10   Pages: 3392-3399  2008

> Neto, VF; and Oliveira, MAS, “Projecto “Mecânica Viva" – divulgação científica e tecnológica das áreas ligadas à Engenharia Mecânica”, Colóquio “Da Investigação à Prática: Interacções e debates”, 15 e 16 de Fevereiro de 2008, Aveiro

> Neto, VF; Oliveira, MSA and Grácio, J, “Diamond coated inserts for micromoulding”, PMI 2008, – 3rd International Conference on Polymers & Moulds Innovations 2008, University College Ghent, Belgium, Sep 2008

> Neto, VF; Oliveira, MSA and Grácio, J, “Diamond coated inserts for thermoplastic injection moulding”, ANM 2008 – 2nd International Conference on Advanced Nano Materials, Aveiro, Portugal, 22 - 25 June 2008

> Oliveira M., Santos V., “Automatic Detection of Cars in Real Roads Using Haar-like Features”, Controlo 2008, 8th Conference on Automatic Control, 21-23 July 2008

> Oliveira M., Santos V., “Multi-Camera Active Perception System with Variable Image Perspective for Mobile Robot Navigation”, 8th Conference on Mobile Robots and Competitions, Festival Nacional de Robótica 2008, Aveiro, Abril 2008

> Oliveira M., Santos V., “Real Time Road Line Extraction with Simple Statistical Descriptors”, 2008 IEEE International Conference on Intelligent Robots Systems (IROS 2008) 22-26 September 2008, Nice, France

> Oliveira, J.A. ,Pinho-da-Cruz,   J.,  Andrade-Campos, A., Teixeira-Dias, F., “Numerical Topology Optimisation Using GiD”, Actas do GiD 2008 - 4th Conference on Advances and Applications of GiD; 5 a 9 Maio, Ibiza, Espanha – 2008

> Oliveira, J.A., Pinho-da-Cruz, J., Teixeira-Dias F., “Aspectos Computacionais da Aplicação da Metodologia de Homogeneização a Materiais Compósitos”, Proceedings of Engenharias'07,  Inovação & Desenvolvimento, CR-ROM (Art. n.º 77); 21 a 23 de Novembro, Universidade da Beira Interior, Covilhã, Portugal – 2007

> Oliveira, M., Santos, V., “Multi-Camera Active Perception System with Variable Image Perspective for Mobile Robot Navigation”, Proc. 8th Conference on Autonomous Robot Systems and Competitions ROBOTICA2008, pp. 63-70, Aveiro, Portugal, 2 April, 2008

> Oliveira, M., Santos, V., “Real time extraction of road border lines using simple statistical descriptors”, Proc. IEEE/RSJ 2008 International Conference on Intelligent Robots and Systems, 2nd Workshop on Planning, Perception and Navigation for Intelligent Vehicles, IROS2008, Nice, France, 22-26 Sep, 2008

> Oliveira, M., Santos, V., “Automatic Detections of Cars in Real Roads using Haar-like Features”, Proc. 8th Portuguese Conference on Automatic Control, CONTROLO2008, Vila-Real, Portugal, 21-23 Jul, 2008

> Pereira, A. B., de Morais A. B., “Mixed-mode I + II interlaminar fracture of carbon/epoxy laminates”, 11th Portuguese Conference on fracture, Lisbon, February 2008

> Pimentel, M, Costa, A & Coelho, M.C., “Modelação de Transportes para a Avaliação de Impactes Ambientais – Caso de Estudo da Área Metropolitana do Porto”, comunicação em Actas do VIII Congreso de Ingeniería del Transporte, realizado em A Coruña (Espanha), Julho de 2008

> Pimentel, M, Costa, A & Coelho, M.C., “Transportation Modelling for Environmental Assessment  - Case study: Metropolitan Area of Porto”, 5.º Encontro do Grupo de Estudos de Transportes, realizado em Mira, Janeiro de 2008.

> Pinho-da-Cruz,   J.,  Oliveira, J.A., Teixeira-Dias F., “Homogenisation of Composite Materials in Thermoelasticity: Formal Mathematics and Computational Issues”, Actas da International Conference on Mathematics and Continuum Mechanics, A.J.M. Ferreira, I.M.N. Figueiredo J. Videman (Eds.), Vol. 30, pp. 35-40;19 a 22 de Fevereiro, , FEUP, Portugal 2008

> Pinto,J. P. , Lopes,  A. M. G., Oliveira, L. A.,  Costa V. A. F, “MEF/VC: uma Estratégia de Flexibilização do Domínio de Cálculo do Escoamento de Fluidos”, V. A. F. Costa (Ed.), Actas da II Conferência Nacional de Métodos Numéricos, em Mecânica de Fluidos e Termodinâmica, Trabalho 11, que teve lugar em Aveiro (Portugal), a 08 e 09 de Maio de 2008

> Rabahallah, M., Balan, T., Barlat, F., “Strain rate potentials with increasing accuracy for sheet forming simulations”, Proc. 9th Intern. Conf. Technology of Plasticity (ICTP 2008), Yang, D.Y., (Ed.), Gyeongju, Korea, Sep 2008 CD-ROM ISBN 978-89-5708-152-5, pp. 1650-1655

> Rodrigues, M.,  Silva, F., Santos, V., “Visual Tracking on an Autonomous Self-contained Humanoid Robot”, The 11th International Conference on Clibing and Walking Robots and the Support Technologies for Mobile Machines CLAWAR2008, pp. 1258-1265, Coimbra, Portugal, 8-10 Sep, 2008

> Rousselier, G., Barlat, F., “Modeling of plastic anisotropy with reduced polycrystalline models. Application to aluminum alloys”. Proc. 11th Intern. Esaform Conf. on Material Forming, Lyon, France, April 2008, ESAFORM2008 CDROM, Springer, pp. 174-177

Santos Silva, J.,  Moreira R.A.S.,  and Dias Rodrigues, J., “Application Of Cork Compounds In Sandwich Structures For Vibration Damping”, 8th International Conference on Sandwich Structures (ICSS8), Porto, Portugal, May 6-8

> Santos Silva, J., Moreira, R.A.S., Dias Rodrigues  J. , “Dynamic behavior of sandwich plates with cork compound cores: modeling and characterization”, 7º Congresso Nacional Mecânica Experimental, APAET 2008, UTAD, Vila Real, Portugal, 23-25 Janeiro, 2008, pp. 243-245

> Sher, B.R., Moreira,R.A.S,  Campos G.A., “The use of genetic algorithms in straight forward engineering problems – the influence of the genetic operators”, 8th World Congress on Computational Mechanics, ECCOMAS 08, #a2751, Venice, Italy, June 30- July 5, 2008

> Shokuhfar T, Makradi A, Titus E, et al, “Prediction of the Mechanical Properties of Hydroxyapatite/Polymethyl Methacrylate/Carbon Nanotubes Nanocomposite”, Conference Information: International Conference on Advanced Nano-Materials, JAN 08-10, 2007  Indian Inst Technol., Bombay, INDIA, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, Volume: 8   Issue: 8  Pages: 4279-4284   AUG 2008 

> Spieckermann F, Wilhelm H, Schafler E, et al, “Application of composite models to isotactic polypropylene for the determination of phase specific stress-strain curves”,  Conference Information: 14th International Conference on the Strength of Materials (ICSMA 14), JUN 04-09, 2006 Xian Jiaotong Univ, Xian, PEOPLES R CHINA, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol 483   Special Issue, 76-78, 2008

> Stoughton, T.B.,  Yoon J.W., “On the relationship between stability and intermediate solutuon to the equations of motion under non-associated flow rule”, Proceeding of PLASTICITY 2008 edited by A.S. Khan, Kona, Hawaii, Jan.3-8, USA, pp.73-75 (2008)

> Tang, C.J., Grácio, J., Neves, A. J., Calisto, H., Fernandes, A. J. S., Fu L. S., “Role of nitrogen additive and surface temperature on growth of diamond films from nanocrystalline to polycrystalline”, ANM2008 - 2nd International Conference on Advanced Nano Materials. Aveiro, Portugal, 22-25 Junho 2008

> Vaz, Neto, VF; Oliveira, MSA and Grácio, J, “CVD diamond on AISI 304 and P20 modified steel”,  ANM 2008 – 2nd International Conference on Advanced Nano Materials, Aveiro, Portugal, 22 - 25 June 2008

Veseniak M, Fiedler T, Ren Z, et al, “Behaviour of syntactic and partial hollow sphere structures under dynamic loading”,  Conference Information, European Congress and Exhibition on Advanced Materials and Processes, SEP 10-13, 2007 Nurnberg, GERMANY, ADVANCED ENGINEERING MATERIALS, Volume: 10   Issue: 3   Pages: 185-191,     MAR 2008

> Xu, L., Barlat, F, “Disk compression testing of advanced steel sheet samples”, Proc. 9th Intern Conf. Technology of Plasticity (ICTP 2008), Yang, D.Y., (Ed.), Gyeongju, Korea, Sept. 2008, CD-ROM ISBN 978-89-5708-152-5, pp. 2312-2317

> Yoon, J.W. , Dick, R.E. ,  Barlat, F., “Analytical prediction of earing for drawn and ironed cups”, NUMISHEET2008 edited by P.Hora, Interlaken, Sept.1-5, Switzerland, pp.97-100 2008

> Yoon, J.W. , Stoughtin, T.B.,  Dick R.E., “Anisotropic sheet forming based on non-associated flow rule”, Proceeding of PLASTICITY 2008 edited by A.S. Khan, Kona, Hawaii, Jan.3-8, USA, pp.91-93 2008

> Yoon, J.W.,  Dick, R.E., Barlat, F., Hong S.H., “On the use of stress-based forming limit curve for forming and fracture”, ICTP2008 edited by D.Y. Yang, Gyungju, Sept.7-11, Korea, pp.315, 2008

> Yoon, J.W., Dick, R.E., Barlat, F, “Analytical approach to predict anisotropic material properties from cup drawings”, Proc. 11th Intern. Esaform Conf. on Material Forming, Lyon, France, April 2008, ESAFORM2008 CDROM, Springer, pp. 614-617

> Yoon, J.W., Dick, R.E., Barlat, F, “Analytical prediction of earing for drawn and ironed cups”, Proc. 7th International conference and Workshop on Numerical Simulations of Sheet Metal Forming Processes, (Numisheet 2008), Sept 1-5, Interlaken Switzerland, Hora, P., (ed.), ETH, Zürich, pp. 97-100

> Yoon, J.W., Dick, R.E., Barlat, F., Hong, S.H., “On the Use of Stress-Based Forming Limit Curve for Forming and Fracture”, Proc. 9th Intern. Conf. Technology of Plasticity (ICTP 2008) Yang, D.Y., (Ed.), Gyeongju, Korea, Sept. 2008, CD-ROM ISBN 978-89-5708-152-5, pp. 708-721

> Zhil’tsova, TV; Neto, VF; Fonseca A; Oliveira, MAS, “Numerical Simulation of a PBT Component with Molded-in Metal Insert”, PMI 2008 - 3nd International Conference on Polymers & Moulds Innovations, University College Ghent, Belgium, 17 to 19 September 2008

> Zhil’tsova, TV; Oliveira, MAS, “Numerical simulation for injection molding process optimization: Case studies”, RPD 2008 - Rapid Product Development - Designing the Industry of Future, Oliveira de Azeméis, Portugal, 29 to 30 October 2008


Patents

> Gracio, J.,  Rauch, E.,  Barlat, F., Yoon  J.W. and Vincze G., Grain Refinement of Metals by the Inversion of Strain Path, PAT 104076 S, 2008


Awards

> Coelho, Margarida, "Best Overall Poster Award" of the 17th International Emission Inventory Conference "Inventory Evolution – Portal to Improved Air Quality", given by the scientific panel of United States Environmental Agency for the poster entitled “Integration of Vehicle Activity into Emissions Estimation based on On-board Measurements for Diesel Light-Duty Vehicles” 2008

> Oliveira, M., Santos V., Best Conference Paper, Multi-Camera Active Perception System with Variable Image Perspective for Mobile Robot Navigation, Proc. 8th Conference on Autonomous Robot Systems and Competitions, ROBOTICA2008 pp. 63-70, Aveiro, Portugal, 2 April, 2008

> Teixeira-Dias, F, APMTAC 2008 - Best young researcher in applied and computational mechanics, given by the Portuguese Association for Theoretical, Applied and Computational Mechanics - APMTAC

> Yoon, Jeong Whan, 2008 International Journal of Plasticity Award, Given to an individual not more than 15 years past the doctoral degree for outstanding contributions over the most recent five year period to the field of plasticity


Conferences and Seminars organization

> ANM2008, 2nd International Conference on advanced Nano Materials -Mira. Portugal    June 22nd - 25th 2008

> CNMNMFT 2008, 2ª Conferência Nacional de Métodos Numéricos em Mecânica de Fluidos e Termodinâmica”, organizada pela Universidade de Aveiro e pela APMTAC, Aveiro , 8 e 9 de Maio de 2008

last updated 31/12/2012
This web site uses cookies without storing personal information that allows the identification of its users. By navigating in this web site you are consenting to the use of these cookies.more information
For this page to function properly you must enable JavaScript execution. If this is not possible some features may be limited.