40 anos da UA
via aberta

information for...
 

publications 2011

Papers in ISI journals
  1. Andrade-Campos, R. de-Carvalho, R.A.F. Valente, Novel criteria for determination of material model parameters, International Journal of Mechanical Sciences 54(1):294-305, doi:10.1016/j.ijmecsci.2011.11.010, 2012.
  2. B. de Morais, A. B. Pereira, M. F. S. F. de Moura. Mode III interlaminar fracture of carbon/epoxy laminates using the Six-Point Edge Crack Torsion (6ECT). Composites Part A, Vol. 42, nº 11, pp. 1793-1799, 2011.
  3. A. B. Pereira, A. B. de Morais, M. F. S. F. de Moura. Design and analysis of a new 6-point edge crack torsion (6ECT) specimen for mode III interlaminar fracture characterisation. Composites Part A, Vol. 42, nº 2, pp. 131-139, 2011.
  4. A. Fonseca, S. Kanagaraj, M.S.A. Oliveira and J.A.O. Simões, "Enhanced UHMWPE Reinforced with MWCNT through Mechanical Ball-Milling", Defect and Diffusion Forum; Vols. 312-315 (2011) pp 1238-1243; DOI: 10.4028/www.scientific.net/DDF.312-315.1238.
  5. A. Kholkin, A.Morozovska, D.Kiselev, I.Bdikin, B.Rodriguez, P.Wu, A.Bokov, Z.-G. Ye, B. Dkhil, L.-Q. Chen, M. Kosec, S.V. Kalinin, Surface domain structures and mesoscopic phase transition in relaxor ferroelectrics, Advanced Functional Materials 21,  1977–1987 (2011). DOI: 10.1002/adfm.201002582
  6. A. Ramos, A. Ballu, M. Mesnard, P. Talaia and J. A. Simões, 2011, Numerical and Experimental Models of the Mandible, Experimental Mechanics, 51:1053-1059.
  7. A. Ramos, A. Completo, C. Relvas, J.A. Simoes, Design process of a novel cemented hip femoral stem concept Materials and Design, Materials and Design, Volume 33, January 2012, Pages 313-321.
  8. A. Ramos, A. Completo, C. Relvas, M. Mesnard, J.A. Simoes, 2011, Straight, semi-anatomic and anatomic TMJ implants: The influence of condylar geometry and bone fixation screws, Journal of Cranio-Maxillo-Facial Surgery 39, 343-350.
  9. A.Brandão, J.F.Monteiro, A.V.Kovalevsky, D.P.Fagg, V.V.Kharton, J.R.Frade, ""Guidelines for improving resistance to CO2 of materials for solid state electrochemical systems"" Solid State Ionics Volume 192, Issue 1, 16 June 2011, Pages 16-20   DOI:10.1016/j.ssi.2010.02.006.
  10. A.D.Brandão, J.Gracio, G.C.Mather, ""V.V.Kharton, D.P.Fagg, B-site substitutions in LaNb1-xMxO4-d materials in the search for potential proton conductors (M=Ga,Ge,Si,B,Ti,Zr,P,Al),"" J.Solid State Chem. Volume 184, Issue 4, April 2011, Pages 863-870  DOI:10.1016/j.jssc.2011.02.012.
  11. António Completo, Fernando Fonseca, A. Ramos, C. Relvas, J. Simões, BIOMECHANICAL ANALYSIS OF TOTAL ELBOW REPLACEMENT WITH UNLINKED iBP PROSTHESIS: AN IN VITRO AND FINITE ELEMENT ANALYSIS Clinical Biomechanics, Volume 26, Issue 10, 2011, Pages 990-997.
  12. António Completo, Fernando Fonseca, A. Ramos, C. Relvas, J. Simões, IMPROVED STABILITY WITH INTRAMEDULLARY STEM AFTER ANTERIOR FEMORAL NOTCHING IN TOTAL KNEE ARTHROPLASTY, Knee Surgery, Sports Traumatology, Arthroscopy, 2011, DOI 10.1007/s00167-011-1557-2.
  13. Frederic Barlat, Jose J.Gracio, Myoung-Gyu Lee, E.F. Rauch and G. Vincze, An alternative to kinematic hardening in classical plasticity, INTERNATIONAL JOURNAL OF PLASTICITY  Volume: 27, 2011,   Issue: 9   Pages: 1309-1327   DOI: 10.1016/j.ijplas.2011.03.003.   
  14. H.H. Bok, M.G.Lee, E.J.Pavlina, F. Barlat, H.D.Kim, Comparative study of the prediction of microstructure and mechanical properties for a hot-stamped B-pillar reinforcing part. Int. J. Mech. Sci., (2011)  53, 744–752. doi:10.1016/j.ijmecsci.2011.06.006.
  15. M.C. Butuc, F. Barlat, J.J. Gracio, Study on plastic flow localization prediction using a physically-based hardening model, COMPUTATIONAL MATERIALS SCIENCE  Volume: 50, 2011,  Issue: 9   Pages: 2688-2697   DOI: 10.1016/j.commatsci.2011.04.020. 
  16. M.C. Butuc, C. Teodosiu, F. Barlat, J. Gracio, Analysis of sheet metal formability through isotropic and kinematic hardening models. European Journal of Mechanics /A Solids, (2011) 30, 532–546. doi: 10.1016/j.euromechsol.2011.03.005.
  17. C. Boeri, FJ Neto da Silva, JAF Ferreira, MP Soares dos Santos; Predicting the drying kinetics of salted codfish (Gadus Morhua): semi-empirical, diffusive and neural network models; International Journal of Food Science and Technology; 2011; 509-515; 10.1111/j.1364-2621.2010.02513.x.
  18. C. Relvas, A. Ramos, A. Completo, J. A. Simões, Accuracy control of complex surfaces in reverse engineering process, International Journal of Precision Engineering and Manufacturing, Vol. 12, No. 6, 2011, pp. 1035-1042.
  19. J.F. Caseiro, R.A.F. Valente, G. Andrade-Campos, J.W. Yoon, Elasto-plastic buckling of integrally stiffened panels (ISP): An optimization approach for the design of cross-section profiles (2011) Thin-Walled Structures, 49 (7), pp. 864-873.
  20. A. Completo, M. Coutinho, M. Schiller, A. Ramos, C. Relvas, J. Simões, S. Meireles, A device to control implant and bone-cement temperatures in cemented arthroplasty. Journal of Medical Devices (ASME), 2011, Vol 5, P027503-1.
  21. A. Completo, F.Fonseca, C. Relvas, A. Ramos, J.A. Simões, Improved Stability with intramedullary stem after anterior femoral notching in total knee arthroplasty, Knee Surg Sports Traumatol Arthrosc, 2011, DOI 10.1007/s00167-011-1557-2.
  22. A. Completo, J. Pereira, F. Fonseca, A. Ramos, C. Relvas, J. Simões,  Biomechanical analysis of total elbow replacement with unlinked iBP prosthesis: An in vitro and finite element analysis. Clinical Biomechanics, 2011;26(10):990-997.
  23. D.Isakov, E. d. M. Gomes, I. Bdikin, B. Almeida, M. Belsley, M. Costa, V. Rodrigues, A. Heredia, Production of Polar ß-Glycine Nanofibers with Enhanced Nonlinear Optical and Piezoelectric Properties. Crystal Growth & Design 11 (10), 4288-4291 (2011). DOI: 10.1021/cg2009336.
  24. R. De-Carvalho, R.A.F.Valente, A. Andrade-Campos, Optimization strategies for non-linear material parameters identification in metal forming problems (2011) Computers and Structures, 89 (1-2), pp. 246-255, DOI: 10.1111/j.1475-1305.2009.00725.x.
  25. L. Syam Sundar, M.T. Naik, K.V. Sharma, Manoj K. Singh, T.Ch. Siva Reddy, Experimental investigation of forced convection heat transfer and friction factor in a tube with Fe3O4 magnetic nanofluid Experimental Thermal and Fluid Science, (2011) Elsevier Publication.
  26. F. Fonseca, E. Rebelo, A. Completo, Tibial Periprosthetic Fracture Combined With Tibial Stem Stress Fracture from Total Knee Arthroplasty, Revista Brasileira de Ortopedia, 2011,  Vol 46(6), 720-725.
  27. A. Fonseca, N. Inacio, S.Kanagaraj, et al., "The Use of Taguchi Technique to Optimize the Compression Moulding Cycle to Process Acetabular Cup Components", Journal of Nanoscience and Nanotechnology; Volume: 11; Issue: 6; 2011, Pages: 5334-5339; DOI: 10.1166/jnn.2011.3770. 
  28. P.P. Gonçalves, M.K. Singh, V.S. Silva, F. Marques, A. Marques, P.R. LeDuc, J. Grácio, P.A.A.P., Marques,  G. Gonçalves, , A.C.M. Sousa, Automated high-throughput screening of carbon nanotube-based bio-nanocomposites for bone cement applications, Pure Appl. Chem., Vol. 83, No. 11, pp. 2063–2069, 2011.
  29. H. Laurent, J. Coër, R. Grèze, P. Y. Manach, A. Andrade-Campos, M. C. Oliveira, L. F. Menezes, Mechanical Behaviour and Springback Study of an Aluminium Alloy in Warm Forming Conditions, ISRN Mechanical Engineering 51(7):1185-1195, Volume 2011, Article ID 381615, doi:10.5402/2011/381615, 2011.
  30. I. K. Bdikin, J. A. Perez, I. Coondoo, A. M. R. Senos, P. Q. Mantas, A. L. Kholkin, Ferroelectric domain structure of PbZr0.35Ti0.65O3 single crystals by piezoresponse force microscopy, J. Appl. Phys. 110, 052003 (7pp) (2011). DOI: 10.1063/1.3623768. 
  31. K. Bdikin, J. Gracio, D. A. Kiselev, S. I. Raevskaya, I. P. Raevski, S. A. Prosandeev,and A. L. Kholkin, Local domain engineering in relaxor 0.77PbMg1/3Nb2/3O3-0.23PbSc1/2Nb1/2O3 single crystals, J. Appl. Phys. 110, 052002 (5pp) (2011).DOI: 10.1063/1.3624812.
  32. Igor K. Bdikin , Vladimir S. Bystrov , Svitlana Kopyl , Rui P G Lopes , Ivonne Delgadillo , Jose Gracio , Elena D Mishina , Alexander S Sigov, Andrei Kholkin; Evidence of Ferroelectricity and phase transition in pressed diphenylalanine peptide nanotubes; Applied Physics Letters; accepted 21.12.2011.
  33. J. A. Santos, V. F. Neto, G. Cabral, D. Ruch, J. Grácio; Comparative study of nanocrystalline diamond deposition on WC-Ni and WC-Co substrates;  Journal of Nanoscience and Nanotechnology, 11 (2011) 5388-5393 DOI: 10.1166/jnn.2011.3785. 
  34. J. Coër, C. Bernard, H. Laurent, A. Andrade-Campos and S. Thuillier, The effect of temperature on anisotropy properties of an aluminium alloy, Experimental Mechanics 51(7):1185-1195, doi: 10.1007/s11340-010-9415-6, 2011.
  35. J. F. Caseiro, A. Andrade-Campos, An Evolutionary-Inspired Optimization Algorithm Suitable for Solid Mechanics Engineering Inverse Problems, International Journal of Mechatronics and Manufacturing Systems 4(5):415-440, 2011.
  36. J.F. Caseiro, J.A. Oliveira, A. Andrade-Campos, Thermomechanical Modelling Strategies for Multiphase Steels, International Journal of Mechanical Sciences 53(9):720-733, doi:10.1016/j.ijmecsci.2011.06.004, 2011.
  37. J.F. Caseiro, R.A.F. Valente, A. Andrade-Campos, R.M. Natal Jorge, Optimisation of tubular hydroforming processes for wrinkling and thinning control, Key Engineering Materials Vol. 473 pp 159-167, doi:10.4028/www.scientific.net/KEM.473.159, 2011.
  38. J.F.Monteiro, A.L Ferreira, I.Antunes, D.P.Fagg, J.R Frade “Thermodynamic restrictions on mechanosynthesis of strontium titanate” accepted J.Solid State Chem. 2011 DOI: 10.1016/j.jssc.2011.10.044.
  39. J.I.V. Sena, R.J. Alves de Sousa, R.A.F. Valente, On the use of EAS solid-shell formulations in the numerical simulation of incremental forming processes, Engineering Computations 28(3):287-313, 2011.
  40. J.M.Sousa, A.L.Ferreira, D.P.Fagg, E.Titus, R.Krishna, J.Gracio, ""Temperature dependence of the Henry’s law constant for hydrogen storage in NaA Zeolites : A Monte Carlo Simulation study"" accepted, Journal of Nanoscience and Nanotechnology, 2011.
  41. Joana C. Mendes, Margarida Fernandes, Debarati Mukherjee, Dinis M. Santos; Simulation of acoustic wave devices using Matlab, Przeglad Elektrotechniczny (2011) (accepted for publication).
  42. Jorge Bandeira, Margarida C. Coelho, Richard Tavares, Maria Elisa Sá & Carlos Borrego, Impact of Land Use on Urban Mobility, Emissions and Air Quality in a Medium-sized City, Science of Total Environment (Elsevier), Volume 409 (6), pp. 1154-1163; http://dx.doi.org/10.1016/j.scitotenv.2010.12.008.
  43. B.C.Lamas, M. A. L.Fonseca, F. A. M. M Goncalves, et al., "EG/CNTs Nanofluids Engineering and Thermo-Rheological Characterization", Journal of Nano Research, Volume: 13, 2011,Pages: 69-74; DOI: 10.4028/www.scientific.net/JNanoR.13.69. 
  44. M.G.Lee, C. Kim, E.J. Pavlina, F.  Barlat, Advances in sheet forming - Materials modeling, numerical simulation, and press technologies. ASME Journal of Manufacturing Science and Engineering, 2011,  133, 061001-0610012. 
  45. M’Guil, S., Ahzi, S., Barlat, F., Gracio, J.J., 2011. Microstructural effects on yield surface evolution in cubic metals using the viscoplastic  –model. International Journal of Plasticity 27, 102–120.
  46. Machado M., Flores P., Ambrosio J., Completo A., 2011. Influence of the contact model on the dynamic response of the human knee joint. Proc. IMechE Part K: J. Multi-body Dynamics 225: 344-358.
  47. M. Mesnard, A. Ramos, A. Ballu, J. Morlier, M. Cid, J.A. Simoes, Biomechanical Analysis Comparing Natural and Alloplastic Temporomandibular Joint Replacement Using a Finite Element Model, Journal of Oral and Maxillofacial Surgery 2011;69(4):1008-1017.
  48. L. Madureira, M. Vaz, J. Monteiro1, N. Viriato Ramos, F. Q. Melo, Mixed Formulation Solution and Optical Based Experimental Methods in the Deformation Analysis of Radially Loaded Cylindrical Shells, STRAIN, Vol. 47, 2011 (Blackwell Editors), pp 1-7 (impact factor: 1.01).
  49. R. Morais, N.M. Silva, P.M. Santos, C.M. Frias, JAF Ferreira, A.M. Ramos, JAO Simões, JMR Baptista, MC Reis,  Double permanent magnet vibration power generator for smart hip prosthesis, Sensors and Actuators A: Physical 2011;172(1):259-268.
  50. N. A. Pertsev, D. A. Kiselev, I. K. Bdikin, M. Kosec, A. L. Kholkin, Quasi-one-dimensional domain walls in ferroelectric ceramics: Evidence from domain dynamics and wall roughness measurements, J. Appl. Phys. 110, 052001 (5pp) (2011). DOI: 10.1063/1.3624810.
  51. Paula P. Gonçalves, Manoj K. Singh*, Virgília S. Silva, Filipa Marques, Ana Marques, Philip R. LeDuc, , José Grácio, Paula A.A.P. Marques, Gil Gonçalves, and António C.M. Sousa, Automated high-throughput Screening of Carbon Nanotube based Bio nanocomposites for Bone Cement Applications, Accepted in Pure and Applied Chemistry (2011) (* as corresponding author).
  52. Paula A.A.P. Marques, G.Gonçalves, Manoj K. Singh, José Grácio, Graphene oxide and hydroxyapatite as fillers of polylactic acid nanocomposites: preparation and characterization, Accepted in J. Nanos. Nanotech. (2011).
  53. Paulo A. N. Dias; José A. C. Alves; Duncan Paul Fagg; Marco S. Reis; Maria H. Gil,  “Development of Semi-Transparent Wood Polymer Composites”, Journal of Vinyl and Additive Technology, Accepted 2011.
  54. R.C. Picu, G.T.  Vincze,  JJ Gracio, Deformation and microstructure-independent Cottrell-Stokes ratio in commercial Al alloys, INTERNATIONAL JOURNAL OF PLASTICITY  Volume: 27, 2011,   Issue: 7   Pages: 1045-1054   DOI: 10.1016/j.ijplas.2010.11.001.  
  55. R. A. F. Valente, A. Andrade-Campos, J. F. Carvalho, P. S. Cruz, An Integrated Methodology for Parameter Identification and Shape Optimization in Metal Forming and Structural Application, Optimization and Engineering 12: 129–152, doi: 10.1007/s11081-010-9126-y, 2011.
  56. R. de-Carvalho, R.A.F. Valente and A. Andrade-Campos, Optimization Strategies for Non-Linear Material Parameters Identification in Metal Forming Problems, Computer & Structures 89: 246–255, doi:10.1016/j.compstruc.2010.10.002, 2010.
  57. R. Tararam, I. K. Bdikin, N. Panwar, J. A. Varela, P. R. Bueno, A. L. Kholkin, Nanoscale electromechanical properties of CaCu3Ti4O12 ceramics, J. Appl. Phys. 110, 052019 (5pp) (2011). DOI: 10.1063/1.3623767.
  58. A. Ramos, A. Completo, C. Relvas, J.A. Simões, A new cemented hip prosthesis concept, J. Med. Devices, 2011, Volume 5, Issue 2, 027503, 2011, (1 pages), doi:10.1115/1.3587102. 
  59. E.F. Rauch, J.J. Gracio, F. Barlat, G. Vincze, Modelling the plastic behaviour of metals under complex loading conditions, MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING  Volume: 19, 2011,   Issue: 3     Article Number: 035009   DOI: 10.1088/0965-0393/19/3/035009.  
  60. C. Relvas, A. Ramos, A. Completo, J. Simões, Accuracy Control of Complex Surfaces in Reverse Engineering. International Journal of Precision Engineering and Manufacturing, 2011, Vol. 12(6).
  61. C. Relvas, A. Ramos, A. Completo, J. Simões, The influence of data shape acquisition process and geometric accuracy of the mandible for numerical simulation', Computer Methods in Biomechanics and Biomedical Engineering, Vol. 14, No. 8, 2011, pp 721–728.
  62. S Kanagaraj, A Fonseca, RM Guedes, MSA Oliveira, JAO Simoes, "Thermo Mechanical Behaviour of Ultrahigh Molecular Weight Polyethylene-Carbon Nanotubes Composites under Different Cooling Techniques", Defect and Diffusion Forum Vols. 312-315 (2011) pp 331-340; DOI: 10.4028/www.scientific.net/DDF.312-315.331.
  63. J.I.V., Sena, R.J.A. De Sousa, R.A.F.Valente, On the use of EAS solid-shell formulations in the numerical simulation of incremental forming processes (2011) Engineering Computations, 28 (3), pp. 287-313.
  64. S.C. Soare, F. Barlat, A study of the Yld2004 yield function and one extension in polynomial form: A new implementation algorithm, modeling range, and earing predictions for aluminum alloy sheets. European Journal of Mechanics A/Solids, (2011) 30, 807-819. 10.1016/j.euromechsol.2011.05.006.
  65. Sunil Singh, Manoj K. Singh , Manasa K. Nayak , Sharda Kumari , Siddhartha Shrivastava , Jose J. A. Gracio, and Debabrata Dash, Characterization of Graphene Oxide by Flow Cytometry and Assessment of Its Cellular Toxicity, Journal of Biomedical Nanotechnology Vol. 7, Issue: 1 pages: 30-31, 2011 (DOI: 10.1166/jbn.2011.1186)
  66. Sunil Singh, Manoj K. Singh, Manasa K. Nayak , Sharda Kumari , Siddhartha Shrivastava , Jose J. A. Gracio, and Debabrata Dash, Thrombus Inducing Property of Atomically Thin Graphene Oxide Sheets, ACS Nano 5 (6), pp 4987–4996 (2011), Impact factor 9.855. 
  67. Sunil Singh, Manoj K. Singh, Jose Gracio, D. Dash, Size distribution analysis and physical / fluorescence characterization of graphene oxide sheets by flow cytometry, CARBON 49, 684-692 (2011) Impact factor 4.505 Times Cited: 1 (from web of Science)
  68. T. Fontes, N. Barros, N.; Spatio-temporal prediction of atmospheric benzene (Part I); Environmental Monitoring and Assessment; Springer, (DOI: 10.1007/s10661-011-2007-9).
  69. V. Ball, D. Del Frari, M. Michel, J. Gracio, Manoj K. Singh, M. J. Buehler, Y. Yan Yang, V. Toniazzo, and D. Ruch 2011 Deposition mechanism and properties of  thin polydopamine films for high added value applications in surface science at the nanoscale BioNanoScience. 
  70. V. V. Neves, A. B. de Morais, A. B. Pereira, R. D. Faria. Compression behavior of woven glass/epoxy specimens using a new end-loaded hybrid specimen,  Polymer Composites, Vol. 32, nº 3, pp. 491-496, 2011.
  71. V.F. Neto, J.A. Santos, N.J. Alberto, J.L. Pinto, R.N. Nogueira, J. Grácio; Evaluation of diamond coatings on optical fibre sensors for biological use; Journal of Nanoscience and Nanotechnology, 11 (2011) 5408-5412 DOI: 10.1166/jnn.2011.3774.
  72. R.A.F. Valente, A. Andrade-Campos, J.F. Carvalho, P.S. Cruz,  Parameter identification and shape optimization: An integrated methodology in metal forming and structural applications (2011) Optimization and Engineering, 12 (1-2), pp. 129-152.
  73. L. Xu, F. Barlat, D.C. Ahn, J.D. Bressan,  Forming limit and fracture mechanism of ferritic stainless steel sheets. Mater. Sci. Eng. A, (2011) 528, 3113–3121. doi:10.1016/j.msea.2011.01.011.
  74. D.-Y Yang, T. W. Lim, Y. Son, F. Barlat, J.W. Yoon, Gripless nanotension test for determination of nano-scale properties, International Journal of Plasticity, 2011, 27, 1527–1536. doi:10.1016/j.ijplas.2010.09.006.
  75. J.W. Yoon, R.E. Dick, F. Barlat, A study on Earing Mechanism during Drawing and Ironing Based on a New Analytical Approach, International Journal of Plasticity, 2011,  27, 1165–1184. doi:10.1016/j.ijplas.2011.01.002.
  76. S. M’Guil, W. Wen, S. Ahzi, J.J. Gracio, Modeling of large plastic deformation behavior and anisotropy evolution in cold rolled bcc steels using the viscoplastic ?-model-based grain-interaction, Materials Science and Engineering: A, 528, 18  (2011), 5840-5853, DOI 10.1016/j.msea.2011.03.110.
  77. A. K. Mossi Idrissa, S. Ahzi, Y. Remond, and J. Gracio, Modeling of the Stress--Birefringence--Stretch Behavior in Rubbers Using the Gent Model, J. Eng. Mater. Technol. 133, 030905 (2011), DOI:10.1115/1.4004053
  78. M Baniassadi, M Safdari, A Ghazavizadeh, H Garmestani, S Ahzi, J Grácio and D Ruch, Incorporation of electron tunnelling phenomenon into 3D Monte Carlo simulation of electrical percolation in graphite nanoplatelet composites, Journal of Physics D-Applied Physics, 44, 45 (2011) 455306 DOI: 10.1088/0022-3727/44/45/455306
  79. R.M. Boumbimba, S. Ahzi, N. Bahlouli, D. Ruch, and J. Gracio, Dynamic Mechanical Properties of PMMA/Organoclay Nanocomposite: Experiments and Modeling, J. Eng. Mater. Technol. 133, 030908 (2011), DOI:10.1115/1.4004052
  80. F. Bernsmann, V. Ball, F. Addiego, A. Ponche, M. Michel, J. Gracio, V. Toniazzo, and D. Ruch, Dopamine-Melanin Film Deposition Depends on the Used Oxidant and Buffer Solution, Langmuir 2011 27 (6), 2819-2825, DOI: 10.1021/la104981s
  81. Qi Hua Fan, David Galipeau, Li Qin Zhou, J.J. Gracio, Computer-aided development of a magnetron source with high target utilization, Vacuum, Volume 85, Issue 8, 1 February 2011, Pages 833-838, ISSN 0042-207X, 10.1016/j.vacuum.2010.12.007.
  82. Faria, R.,  Ferreira, A.D., Sismeiro, J.L., Mendes, J.C.F. and Sousa,  A.C.M., Wind tunnel and computational study of the stoss slope effect on the aeolian erosion of transverse sand dunes, Aeolian Research, (2011) Vol. 3, Issue 3, (303-314) DOI: 10.1016/j.aeolia.2011.07.004
  83. Hadavand, M., and Sousa, A.C.M.,  Simulation of Thermomagnetic Convection in a Cavity Using the Lattice Boltzmann Model, Journal of Applied Mathematics, (2011) Article ID 538637, doi:10.1155/2011/538637
  84. Farimani, A., Ferreira, A.D., and Sousa, A.C.M., Computational modeling of the wind erosion on a sinusoidal pile using a moving boundary method, Geomorphology (2011) Vol. 130, Issue: 3-4, pp. 299-311   DOI: 10.1016/j.geomorph.2011.04.012
  85. Ferreira, A.D., Farimani, A., and Sousa, A.C.M. , Numerical and experimental analysis of wind erosion on a sinusoidal pile, Environmental Fluid Mechanics, (2011) Vol 11, Issue 2, pp. 167-181 doi: 10.1007/s10652-010-9168-x
  86. Gaitonde V. N.; Karnik S. R.; Campos Rubio J.; et al., A study aimed at minimizing delamination during drilling of CFRP composites, Journal Of Composite Materials, Volume: 45  Issue: 22   Pages: 2359-2368   DOI: 10.1177/0021998311401087
  87. Dixit U. S.; Joshi S. N.; Davim J. P., Incorporation of material behavior in modeling of metal forming and machining processes: A review, Materials & Design, Volume: 32   Issue: 7 Pages: 3655-3670 DOI: 10.1016/j.matdes.2011.03.049
  88. Campos Rubio J.; Panzera T. H.; Abrao A. M.; et al., Effects of high speed in the drilling of glass whisker-reinforced polyamide composites (PA66 GF30): statistical analysis of the roughness parameters, Journal Of Composite Materials, Volume: 45  Issue: 13 Pages: 1395-1402 DOI: 10.1177/0021998310381540
  89. Esteves Correia A.; Paulo Davim J., Surface roughness measurement in turning carbon steel AISI 1045 using wiper inserts, Measurement,  Volume: 44   Issue: 5   Pages: 1000-1005   DOI: 10.1016/j.measurement.2011.01.018
  90. Karnik S. R.; Gaitonde V. N.; Mata Francisco; et al., Response to Sha's comment on article titled 'Investigative study on machinability aspects of unreinforced and reinforced PEEK composite machining using ANN model', Journal Of Reinforced Plastics And Composites, Volume: 30 Issue: 7 Pages: 643-644 DOI: 10.1177/0731684411399143
  91. Davim J. P.; Gaitonde V. N.; Karnik S. R., Machinability Evaluation in Unreinforced and Reinforced PEEK Composites using Response Surface Models, Journal Of Thermoplastic Composite Materials, Volume: 24   Issue: 2   Pages: 299-299   DOI: 10.1177/0892705709093503   
  92. Roy Manish; Davim J. Paulo, Special Issue: Nanoindentation And Nanotribology, International Journal Of Surface Science And Engineering, Volume: 5   Issue: 1   Special Issue: SI  Pages: 1-2
  93. Hazarika M.; Deb S.; Dixit U. S.; et al., Fuzzy set-based set-up planning system with the ability for online learning, Proceedings Of The Institution Of Mechanical Engineers Part B-Journal Of Engineering Manufacture, Volume: 225   Issue: B2   Pages: 247-263   DOI: 10.1243/09544054JEM1867
  94. Kumar Harmesh; Davim J. Paulo , Role of Powder in the Machining of Al-10% Sic(p) Metal Matrix Composites by Powder Mixed Electric Discharge Machining, Journal Of Composite Materials,  Volume: 45  Issue: 2   Pages: 133-151   DOI: 10.1177/0021998310371543   
  95. Gaitonde Vinayak Neelakanth; Karnik S. R.; Figueira Luis; et al., Performance comparison of conventional and wiper ceramic inserts in hard turning through artificial neural network modeling, International Journal Of Advanced Manufacturing Technology, Volume: 52   Issue: 1-4   Pages: 101-114  DOI: 10.1007/s00170-010-2714-3
  96. Moreira R. A. S.; Dias Rodrigues J., A non-conforming plate facet-shell finite element with drilling stiffness, Finite Elements In Analysis And Design, Volume: 47  Issue: 9   Pages: 973-981   DOI: 10.1016/j.finel.2011.03.013
  97. Paulino M.; Teixeira-Dias F., An energy absorption performance index for cellular materials - development of a side-impact cork padding, International Journal Of Crashworthiness,  Volume: 16   Issue: 2   Pages: 135-153   Article Number: PII 937003140   DOI: 10.1080/13588265.2010.536688
  98. Kanagaraj S.; Fonseca A.; Guedes R. M.; et al., Thermo-Mechanical Behaviour of Ultrahigh Molecular Weight Polyethylene-Carbon Nanotubes Composites under Different Cooling Techniques, DIFFUSION IN SOLIDS AND LIQUIDS VI, PTS 1 AND 2 Book Series: Defect and Diffusion Forum   Volume: 312-315  Pages: 331-340   DOI: 10.4028/www.scientific.net/DDF.312-315.331   
  99. de Morais A. B., A new fibre bridging based analysis of the Double Cantilever Beam (DCB) test, Composites Part A-Applied Science And Manufacturing  Volume: 42   Issue: 10   Pages: 1361-1368  DOI: 10.1016/j.compositesa.2011.05.019 
  100. Pereira A. B.; de Morais A. B.; de Moura M. F. S. F., Design and analysis of a new six-point edge crack torsion (6ECT) specimen for mode III interlaminar fracture characterization, Composites Part A-Applied Science And Manufacturing, Volume: 42   Issue: 2   Pages: 131-139  DOI: 10.1016/j.compositesa.2010.10.013
  101. Yoon J. W.; Dick R. E.; Barlat F., A new analytical theory for earing generated from anisotropic plasticity, International Journal Of Plasticity, Volume: 27 Issue: 8 Pages: 1165-1184 DOI: 10.1016/j.ijplas.2011.01.002
Books
  1. A. Completo, F. Fonseca, 2011: FUNDAMENTOS DE BIOMECÂNICA MÚSCULO-ESQUELÉTICA E ORTOPÉDICA, Publindustria ISBN: 978-972-8953-70-6
  2. Victor Neto, "Carbon-based coatings for the modern plastics industry: High performance micromolding diamond coated tools", LAP LAMBERT Academic Publishing, ISBN-13: 978-3846520093, 2011
Books chapters
  1. A. Ramos, 2011, “Biomecânica da Anca”, Fundamentos de Biomecânica Musculo-esquelética e ortopédica, António Completo e Fernando Fonseca (eds), Engebook, Portugal (isbn: 978-972-8953-70-6).
  2. Robertt A. F. Valente, Ricardo J. Alves de Sousa, Marisa P. Henriques, Tiago J. Grilo, Numerical simulation of wrinkling deformation modes in sheet metal forming: state-of-the-art and future trends”, Statistical and Computational Techniques in Manufacturing, J. P. Davim (editor), Springer (2012), ISBN 978-3-642-25858-9.
  3. A. Ramos, M. Mesnard, C. Relvas, A. Completo, J.A. Simoes, "Influence on the mandible and on a condyle implant of the distribution of the fixation surgical screws", capítulo do livro "Proceedings of the 6th International Conference on Technology and Medical Sciences – TMSi 2010", editado por R.M. Natal Jorge, João Manuel R.S. Tavares, Marcos Pinotti Barbosa e Alan Peter Slade, Taylor and Francis, Inglaterra, ISBN: 978-0-415-66822-4, e-ISBN: 978-0-203-81659-2, 2011.
  4. Carlos Relvas e Victor Neto, ""Novas perspetivas tecnológicas nos processos de concepção e desenvolvimento"", capítulo 4 do livro ""O processo de inovação"", editado por José Dantas e António Carrizo Moreira, Lidel, Portugal, ISBN: 978-972-757-758-3, 2011. Chapter 4: A Finite Element Formulation for Piping Structures Based on thin Shell Displacements Theory 
  5. Robertt A. F. Valente, Ricardo J. Alves de Sousa, António Andrade-Campos, Raquel de-Carvalho, Marisa P. Henriques, José I. V. Sena, João F. Caseiro, Developments in finite element technology and optimization formulations for sheet metal forming, “Computational Methods for Optimizing Manufacturing Technology”, J. P. Davim (editor), IGI Global (2012), ISBN13: 9781466601284. 
  6. T. Fontes, N. Barros, Mobilidade e qualidade do ar: O caso da cidade do Porto In Hernâni Veloso Neto e Sandra Lima Coelho (Org) - Novas dimensões do consumo na sociedade contemporânea, Porto: IS-FLUP, 131-154 (ISBN 978-972-97763-1-1).
  7. I. Bdikin, R. Rai, A. Heredia, D. Kiselev, J. Gracio, S. Sharma, A.L.Kholkin, Electromechanical Imaging of Ferroelectric and Piezoelectric Materials, in Synthesis, Characterization and Application of Smart Materials, Ed. Radheshyam Rai, Nova Science Publishers, ISBN: 978-1-61470-835-3, 2011.
  8. I. Duarte, M. Oliveira; Aluminium Alloy Foams: Production and Properties;Powder Metallurgy; ISBN 978-953-308-46-2 
  9. J.A.M. Santos, J. Lencart, A.G. Dias, L.T. Cunha, C. Relvas, A. Ramos e V. Neto, ""External breast radiotherapy treatment planning verification using advanced anthropomorphic phantoms"", capítulo do livro ""Proceedings of the 6th International Conference on Technology and Medical Sciences – TMSi 2010"", editado por R.M. Natal Jorge, João Manuel R.S. Tavares, Marcos Pinotti Barbosa e Alan Peter Slade, Taylor and Francis, Inglaterra, ISBN: 978-0-415-66822-4, e-ISBN: 978-0-203-81659-2, 2011
  10. Joana Reis, Fernando Capela-Silva, José Potes, Alexandra Fonseca, Mónica Oliveira, Subramani Kanagaraj and António Torres Marques, ""Carbon Nanotubes – Interactions with Biological Systems"", capítulo do livro ""Carbon Nanotubes - Growth and Applications"", editado por Dr. Mohammad Naraghi, InTech, August 2011, ISBN: 978-953-307-566-2"
  11. João A. Oliveira, Joaquim Pinho-da-Cruz and Filipe Teixeira-Dias, Asymptotic Expansion Homogenisation and Multiscale Topology Optimisation of Composite Structures, ISBN 978-953-307-449-8.
  12. M. P. Henriques, T. J. Grilo, R. Alves de Sousa, R. A. F. Valente, Numerical simulation and prediction of wrinkling defects in sheet metal forming, in "Statistical and Computational Techniques in Manufacturing", P. Davim (Editor), Springer, to be published in 2012.
  13. Paula A. A. P. Marques, Gil Gonçalves, Sandra Cruz, Nuno Almeida, Manoj K. Sing, José Grácio, Antonio C. M. Sousa, Functionalized Graphene Composites, In: Nanocomposites , ISBN978-953-308-55-0. Book edited by: Dr. Abbass Hashim, Sheffield Hallam University, UK, Intech Open Access Publisher.
  14. E.M.M. Fonseca, F.J.M.Q. Melo, L.R. Madureira, NOVA Science Editors, available in book chapter in 2012, can be seen in  https://www.novapublishers.com/catalog/product_info.php?products_id=30475.
  15. E. Titus, J. Gracio, Manoj K. Singh, and A. C. M. Sousa, Bio-inspired Magnetic carbon material is accepted to publish in ninth volume of the NmLS series by Wiley-VCH, [http://www.wiley-vch.de/books/info/ntls/]. A ten volume book series on “Nanotechnologies for Life Sciences”.
  16. Elby Titus, Manoj Kumar Singh, Rahul Krishna, Ricardo G. Dias, Antonio Ferreira and Jose Gracio, Carbon nanotubes and Spintronics, has been accepted for publication in the book ""Carbon Nanotubes / Book 5"", ISBN 978-953-307-499-3, InTech - Open Access Publisher Web: http://www.intechweb.org/
  17. Elby Titus, Rahul Krishna, José Grácio, Manoj Singh, Antonio Luis Ferreira and Ricardo G Dias, Carbon Nanotube Based Magnetic Tunnel Junctions (MTJs) for Spintronics Application, (2011)  ISBN 978-953-307-499-3.
Other publications
  1. M. Aoun; M. Mesnard; A. Ramos; J. Morlier; F. Puel; M. Cid, 2011, Elaboration and validation of 2D finite element model of the temporomandibular joint using magnet resonance images: simulation of an open close movement, Russian Journal of Biomechanics, vol. 15, nº 1 (51): 21-29.
  2. J. Bandeira, D. Carvalho, A. Khattak & M. C. Coelho, Impacts on Emissions and Fuel Consumption of Route Choice Decision – Influence of Peak Hour in Different Realities, Proceedings of the 91st Transportation Research Board Annual Meeting, Washington D.C., January 2012.
  3. J. Bandeira, T. Almeida, A. Khattak, N. Rouphail & M. C. Coelho, Characterization of urban environment to enhance the driver’s route choice – Application to urban and suburban routes, Proceedings of the 90th Transportation Research Board Annual Meeting, Washington D.C., January 2011.
  4. J. Nobre, B. Gouveia, M. C. Coelho, Mobilidade Elétrica – Aplicação ao Concelho de Sintra, Proceedings of the 6º Encontro Nacional do Colégio de Engenharia Mecânica da Ordem dos Engenheiros, to be held in Coimbra, March 2012.
  5. Jorge Bandeira, Tiago Almeida, Asad Khattak & Margarida C. Coelho, Generating Emissions Information for Route Selection – Experimental Monitoring and Routes Characterization, Proceedings of the 8.º Encontro do Grupo de Estudos de Transportes, Esmoriz, January 2011. 
  6. M. C. Coelho, G. Torrão, P. Fernandes, R. Silva, N. Rouphail, Avaliação do Compromisso entre Segurança e Emissões para o Tráfego Rodoviário, Proceedings of the 6º Encontro Nacional do Colégio de Engenharia Mecânica da Ordem dos Engenheiros, to be held in Coimbra, March 2012.
  7. M. C. Coelho, J. Bandeira, M. Pimentel, T. Fontes, A. Khattak, Sistema inteligente de suporte à decisão para escolha de rotas, Proceedings of the 6º Encontro Nacional do Colégio de Engenharia Mecânica da Ordem dos Engenheiros, to be held in Coimbra, March 2012.
  8. M. C. Coelho, P. Fernandes, J. Bandeira, B. Schroeder, N. Rouphail, G. Gonçalves, F.N. Silva, Estudo de Tráfego e Emissões de Poluentes na Avenida da Liberdade, Proceedings of the 6º Encontro Nacional do Colégio de Engenharia Mecânica da Ordem dos Engenheiros, to be held in Coimbra, March 2012.
  9. M. Grácio, C. Finet, M. Desaeger, F. N. da Silva & M. C. Coelho, Which prospects for energy usage and CO2 impact in the European transportation sector?, Proceedings of the 91st Transportation Research Board Annual Meeting, to be held in Washington D.C., January 2012.
  10. M.C. Coelho, F. Neto da Silva, P.P. Gonçalves, V. S. Silva, N. Soares, S. Dutta, S. Kopyl, J. Grácio e A.C.M. Sousa, Avaliação do aproveitamento energético de microalgas para produção de biodiesel, Proceedings of the 6º Encontro Nacional do Colégio de Engenharia Mecânica da Ordem dos Engenheiros, to be held in Coimbra, March 2012.
  11. Márcio Coelho, Jorge M. Bandeira & Margarida C. Coelho, Impact of Road Traffic Incidents on Pollutant Emissions, Proceedings of the IEEE Forum on Sustainable Transportation System, Vienna, June 2011.
  12. Marco Soares dos Santos, Delio Joao Rolo, Jorge Augusto Ferreira, Ant´onio Manuel Ramos, Camila Nicola Boeri, FUZZY CONTROL OF A SERVOPNEUMATICWEAR SIMULATOR OF ACETABULAR COMPONENTS OF HIP PROSTHESIS, Implementing Nonlinear Controllers for the Angular Movement of Three Coupled Degrees of Freedom, ICINCO 2011, 8th International Conference on Informatics in Control, Automation and Robotics, 28-31 July, Noordwijkerhout, The Netherlands
  13. Margarida C. Coelho & Márcio Coelho, Modelação numérica de incidentes de tráfego rodoviário – Impacte ao nível de consumos e emissões de poluentes, Proceedings of the 8.º Encontro do Grupo de Estudos de Transportes, Esmoriz, January 2011.
  14. Margarida C. Coelho and Paulo Fernandes, Coorelação de variáveis representativas de segurança rodoviária, Proceedings of the 8.º Encontro do Grupo de Estudos de Transportes, Esmoriz, January 2011.
  15. Margarida C. Coelho and Sérgio Pereira, Life Cycle Analysis of Hydrogen – A Well-to-Pump Analysis for Application to the Transportation Sector in Portugal, Proceedings of the International Advanced Mobility Forum, Geneva, March 2011.
  16. Margarida C. Coelho and Sérgio Pereira, Life Cycle Analysis of Hydrogen – A WTW Analysis with Scenarios for Portugal, Proceedings of the ICAE2011 – International Conference on Applied Energy, Perugia, May 2011.
  17. S. Dutta, F. Neto, M.C. Coelho, P.P. Gonçalves, V. S Silva, S. Kopyl, F. Gabriel Acien, J. Gracio and A.C.M. Sousa, Analysis of potential of high quality biodiesel production from microalgae, Proceedings of the 19th European Biomass Conference and Exhibition – From Research to Industry and Markets, Berlin, June 2011.
  18. V.F. Neto, M.S.A. Oliveira e J. Grácio - "Performance of nanocrystalline diamond coated micromolding tools", MS&T2011 - Materials Science & Technology 2011 - Simpósio: Surface Protection for Enhanced Materials Performance:  Science and Technology, 16 to 20 October 2011, Columbus, Ohio, USA. 
  19. Robertt A.F. Valente, FEM analysis of sandwich shells with metallic foam cores, (2011) Key Engineering Materials, 473, pp. 659-666.
  20. Robertt A.F. Valente, Optimisation of tubular hydroforming processes for wrinkling and thinning control"" (2011) Key Engineering Materials, 473, pp. 159-167.
  21. Robertt A.F. Valente, António Andrade-Campos and Jean-Philippe Ponthot (Invited/Guest Editors), Special Issue on Optimisation Methodologies and Finite Element Numerical Simulation applied to Metal Forming Industrial Problems, International Journal of Mechatronics and Manufacturing Systems (IJMMS) 4 (5), 2011, 18-20 Abril, 2011, Leuven, Bélgica.
  22. A. Completo, M. Coutinho, M. Schiller, A. Ramos, C. Relvas, J. Simões, S. Meireles, A Device to Control Implant and Bone-Cement Temperatures in Cemented Arthroplasty, Design of Medical Devices conference 2011, April 12-14, Radisson University Hotel, Minneapolis, MN
  23. A. Completo, M. Coutinho, M. Schiller, A. Ramos, C. Relvas, J. Simões, S. Meireles, A Device to Control Implant and Bone-Cement Temperatures in Cemented Arthroplasty, Journal of Medical Devices, vol. 5, 027503-1.
  24. A. Completo, S. Silva, I. Alcântara, F. Fonseca, A. Ramos, C. Relvas, J. Simões, S. Meireles, Biomechanical Behaviour of Cancellous Bone in Lumbar Vertebra Before And After Total Disk Replacement With Prodisc-L, ISB 2011, International society of Biomechanics, Brussels, 3-7 July 2011
  25. A. Ramos, C. Relvas, A. Completo, and J. A. Simões, 2011, A novel cemented hip femoral stem concept, International Society for Technology in Arthroplasty (ISTA), 20-23 September, Brugges, Belgium.
  26. A. Ramos, C. Relvas, A. Completo, and J. A. Simões, The influence of stem surface in micro mobility and cement stress, IV International Conference on Computational Methods for Coupled Problems in Science and Engineering 2011, 20-23 June, Kos, Greece.
  27. I. Alcântara, S. Silva, A. Completo, F. Fonseca, J. Veloso, A. Ramos, C. Relvas, J. Simões,  " Avaliação do comportamento biomecânico da vértebra lombar nativa e protésica"" Revista Portuguesa de Ortopedia e Traumatologia, 19 (2), Pg 105-113, 2011.
  28. R.J. Alves de Sousa, S.R. Marabuto, J.I.V.Sena, D. Afonso, M.A.B.E. Martins, R.M. Coelho, J.A.F. Ferreira, R.A.F. Valente, “Numerical studies and equipment development for single point incremental forming”, International Deep Drawing Research Group Conference (IDDRG 2011), 5-8 Junho, 2011, Bilbao, Espanha.
  29. A. Andrade-Campos, R. de-Carvalho, R.A.F. Valente, “A novel criterion for determination of material model parameters”, The 14th International ESAFORM Conference on Material Forming (ESAFORM 2011), 27-29 Abril, 2011, Irlanda do Norte, Reino Unido.
  30. António Ramos, Carlos Relvas, António Completo, José Simões. 2011 Estudo do comportamento das interfaces na artroplastia cimentada da anca. XXIXI Congresso Nacional de Ortopedia e Traumatologia, 19 a 21 de Outubro de 2011, Estoril.
  31. Joaquim Pinho-da-Cruz, Nuno Lopes and Paulo Vila Real , BEHAVIOUR OF ALUMINIUM STRUCTURES UNDER NORMAL AND FIRE CONDITIONS;; DECivil Research Meeting 2011, October 2011, Aveiro, Portugal .
  32. C. Boeri, F. Neto da Silva, J. Ferreira, R. Moreira, M. Soares dos Santos, “Determination of the Equilibrium Moisture Content Isotherms of Codfish (Gadus Morhua)”. Fifth Nordic Drying Conference, 19 a 21 de Junho, Helsínquia, Finlândia, 2011.
  33. C. Boeri, F. Neto da Silva, J. Ferreira, R. Moreira, M. Soares dos Santos, “Modeling the Correlation Between Relative Humidity, Temperature and Air Velocity in Codfish Drying”. Fifth Nordic Drying Conference, 19 a 21 de Junho, Helsínquia, Finlândia, 2011.
  34. C. Boeri, F. Neto da Silva, J. Ferreira, M. Soares dos Santos, “Lógica Fuzzy na Optimização do Controlo de Processos de Secagem”. 10º Congresso Iberoamericano de Engenharia Mecânica, CIBEM10, Porto, Portugal, 2011.
  35. M. Bola, A. Ramos, A. Andrade de Campos, C. Relvas, A. Completo, J.A. Simões, 2011. Modelo numérico e experimental de um macro-modelo de braquete para medição das forças envolvidas em dispositivos ortodônticos. 4º Congresso Nacional de Biomecânica, L. Roseiro et. al, 4 a 5 Fevereiro 2011, Coimbra, pp. 315-318.
  36. H.J.Bong, F. Barlat, M.G. Lee, 2011. Determination of the forming limit diagram of an ultra-thin ferritic stainless steel sheet. Proc. 8th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET 2011), Chung, K., Han, H.N., Huh, H., Barlat, F., Lee, M.G., (Eds.), AIP Conference Proceedings 1383, pp. 815-820.
  37. M.C. Butuc, F. Barlat, J.J. Gracio, G. Vincze, 2011. Plastic instability in complex strain paths predicted by advanced constitutive equations. Proc. 8th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET 2011), Chung, K., Han, H.N., Huh, H., Barlat, F., Lee, M.G., (Eds.), AIP Conference Proceedings 1383, pp. 194-201.
  38. D. Cardoso Santos, E. Andrade Torres, F. Neto da Silva, “Utilização de biodiesel de diferentes proveniências em motores de combustão interna: desempenho e emissões”. 10º Congresso Iberoamericano de Engenharia Mecânica CIBEM10, Porto, Portugal, 2011.
  39. Carlos M. Granadeiro, Gil Gonçalves, Paula A.A.P. Marques, Pedro M.F.J. Costa, Rute A. Sá Ferreira, Luís D. Carlos and Helena I.S. Nogueira, Photoluminescent graphene/polyoxometalate composites Nanocarbons 2011: Carbon Nanotubes and Related Materials: From Physico-Chemical Properties to Biological and Environmental Effects, 6 - 11 September 2011, Italy.
  40. Carlos M. Granadeiro, Gil Gonçalves, Paula A.A.P. Marques, Pedro M.F.J. Costa, Rute A. Sá Ferreira, Luís D. Carlos and Helena I.S. Nogueira, Photoluminescent graphene/polyoxometalate composites, 4th Iberian Meeting on Colloids and Interfaces University of Porto, from 13th to 15th July 2011, Portugal.
  41. JFM Caseiro, RAF Valente, A. Andrade-Campos, RM Natal Jorge, “On a new optimization approach for the hydroforming of defects-free tubular metallic parts”, The 14th International ESAFORM Conference on Material Forming (ESAFORM 2011), 27-29 Abril, 2011, Irlanda do Norte, Reino Unido.
  42. JFM Caseiro, RAF Valente, A. Andrade-Campos, RM Natal Jorge, “Optimisation of tubular hydroforming processes for wrinkling and thinning control”,14th International Conference on Sheet Metal (SHEMET 2011).
  43. A. Castro, A. Completo, J.A. Simões, P. Flores, 2011. Biomechanical response of new femoral components for biomechanical response of new patellofemoral arthropslasty. 4º Congresso Nacional de Biomecânica, L. Roseiro et. al, 4 a 5 Fevereiro 2011, Coimbra, pp. 561-566.
  44. A. Castro, J. Alves, P. Flores, A. Completo, 2011. Finite element study on the biomechanical behavior of the intervertebral disc. 4º Congresso Nacional de Biomecânica, L. Roseiro et. al, 4 a 5 Fevereiro 2011, Coimbra, pp. 267-272.
  45. A. Completo, M. Coutinho, M. Schiller, A. Ramos, C. Relvas, J. Simões, S. Meireles, 2011. A device to control implant and bone-cement temperatures in cemented arthroplasty. Proceedings of the 2011 Design of Medical Devices Conference. April 12-14, 2011, Minneapolis, MN, USA.
  46. A. Completo, S. Silva, I. Alcântara, A. Ramos, C. Relvas, J. Simões, S. Meireles, 2011. BIOMECHANICAL BEHAVIOUR OF CANCELLOUS BONE IN LUMBAR VERTEBRA BEFORE AND AFTER TOTAL DISK REPLACEMENT WITH PRODISC-L Proceedings of the XXIII congress of the International Society of Biomechanics. P178, July 3-7, 2011, Brussels, Belgium.
  47. A. Completo, A. Silva,  P. Alcântara, F. Fonseca,  A. Ramos, C. Relvas, 2011, Biomechanical Behaviour of cancelouse bone in lumbar vertebra before and after total disk replacement with Prodisc-L, ISB 2011 (international Society of Biomechanics), Brussels, July 3-7, pp:178.
  48. R. De-Carvalho, S. Silva, RAF Valente, A. Andrade-Campos, “The geometry definition influence in inverse analysis - Application to a carter forming process”, The 14th International ESAFORM Conference on Material Forming (ESAFORM 2011), 27-29 Abril, 2011, Irlanda do Norte, Reino Unido
  49. Joaquim Pinho-da-Cruz, Paulo Vila Real  e Nuno Lopes , ESTRUTURAS DE ALUMÍNIO: NOMOGRAMAS PARA O CÁLCULO DA SUA RESISTÊNCIA AO FOGO DE ACORDO COM O EUROCÓDIGO 9;2as Jornadas de Segurança aos Incêndios Urbanos, Universidade de Coimbra - Portugal – 3 de Junho de 2011.
  50. G. Suchaneck, Z. Hubicka, M. Cada, D. A. Kiselev, I. Bdikin, A. A. Levin, L. Jastrabík, A. L. Kholkin, G. Gerlach & A. Dejneka, Imprint Behavior of Piezoelectric PZT Thin Films Deposited onto Cu-Coated Polymer Substrates, Ferroelectrics 419, 103–108  (2011).
  51. Ha, J.J., Lee, J.W., Kuwabara, T., Lee, M.–G., Barlat, F., 2011. Application of homogeneous potentials for the modeling of the Bauschinger effects in ultra low carbon steel.  The 14th International ESAFORM Conference on Material Forming, AIP Conf. Proc. 1353, 1453–1457. doi: 10.1063/1.3589721.
  52. I. Alcântara, S. Silva, António Completo, Fernando Fonseca, José Veloso, A. Ramos, C. Relvas, J. Simões, ""Avaliação do comportamento biomecânico da vértebra lombar nativa e protésica"", RPOT, 2011 Fascículo II - Vol 19 Fasc 2
  53. J. A. Santos, V. F. Neto*, D. Ruch, J. Grácio - ""Diamond Coated Mechanical Seals in Working Conditions: Wear Performance"", MS&T2011 - Materials Science & Technology 2011 - Simpósio: Surface Protection for Enhanced Materials Performance:  Science and Technology, 16 to 20 October 2011, Columbus, Ohio, USA. "
  54. J. Marques de Sá, R. Sebastião, J. Gama, T. Fontes; New results on minimum error entropy decision trees; LNCS 7042; 2011; 335-362.
  55. J.C. Mendes, M. Fernandes, D. Mukherjee, D.M. Santos; Simulation of surface acoustic wave devices using matlab, “XIICLEEE – 12thPortuguese-Spanish Conference on Electrical Engineering”, 30th June – 2nd July 2011, Ponta Delgada, Açores, Portugal, pp. 1834
  56. Joana Miguel Pereira, António Completo, Fernando Fonseca, António Miranda,, Antonio Ramos, Carlos Relvas. 2011. Estudo biomecânico da artroplastia do cotovelo com prótese total não constrangida iBP. XXIXI Congresso Nacional de Ortopedia e Traumatologia, 19 a 21 de Outubro de 2011, Estoril.
  57. Jorge Bandeira, Dario Carvalho, Asad Khattak & Margarida C. Coelho, Impact of tolls implementation on a Portuguese intercity corridor – An environmental perspective, Proceedings of the conference Transportation Research Arena – TRA 2012, to be held in Athens, April 2012.
  58. J.W. Lee, S.N. Kim, J.J. Ha, M.G. Lee, F. Barlat, 2011. Evaluation of anisotropic yield functions characterized by uni-axial, in-plane bi-axial and plane strain experiments.  The 14th International ESAFORM Conference on Material Forming. AIP Conf. Proc. 1353, 1458–1463. doi: 10.1063/1.3589722
  59. J.Y. Lee, M.G. Lee, F.  Barlat, 2011. Evaluation of constitutive models for springback prediction in U-draw/bending of DP and TRIP steel sheets. Proc. 8th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET 2011), Chung, K., Han, H.N., Huh, H., Barlat, F., Lee, M.G., (Eds.), AIP Conference Proceedings 1383,  pp. 571-578.
  60. M. Bola, A. Ramos, C. Relvas, A. Completo e J. A. Simões, MODELO NUMÉRICO E EXPERIMENTAL DE UM MACRO MODELO DE BRAQUETE PARA MEDIÇÃO DAS FORÇAS ENVOLVIDAS EM DISPOSITIVOS ORTODÔNTICOS, 4º CONGRESSO NACIONAL DE BIOMECÂNICA, L. Roseiro, M. Augusta et al (Eds), Coimbra, Portugal, 4 e 5 de Fevereiro, 2011.
  61. M. Fernandes, J.C. Mendes, D.M. Santos; Surface acoustic wave devices as Passive, WIRELESS transducers for mechanical tests, “ICCS 16 - 16th International Conference on Composite Structures”, 28-30 June 2011, Porto, Portugal
  62. M. Mesnard, A. Ramos, Y. Nyashin, M. Aoun, JA. Simoes, VA. Lokhov, 2011, Analysis of TMJ Replacement Using a Finite Element Model, Proceedings of the IMProVe, International conference on Innovative Methods in Product Design, June 15th – 17th, 2011, Venice, Italy
  63. M.C. Butuc, F. Barlat, J.J. Gracio and G. Vincze, Plastic Instability in Complex Strain Paths Predicted by Advanced Constitutive Equations, 8th International Conference and Workshop on Numberical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET 2011) Location: Seoul, SOUTH KOREA Date: AUG 21-26, 2011, Volume: 1383,   Pages: 194-201,   DOI: 10.1063/1.3623611.   
  64. SR Marabuto, JIV Sena, D. Afonso, M.A.B.E. Martins, RM Coelho, JAA Ferreira, RAF Valente, RJ Alves de Sousa, “Numerical and experimental studies of single point incremental forming”, The 14th International ESAFORM Conference on Material Forming (ESAFORM 2011), 27-29 Abril, 2011, Irlanda do Norte, Reino Unido.
  65. Margarida Machado, Paulo Flores, Jorge Ambrósio, António Completo, 2011. Development of a biomechanical multibody knee model. 4º Congresso  Nacional de Biomecânica, L. Roseiro et. al, 4 a 5 Fevereiro 2011, Coimbra, pp. 221-226.
  66. Margarida Machado, Paulo Flores, Jorge Ambrósio, António Completo, 2011. Study of the influence of the contact model on the dynamic response of a biomechanical multibody knee model. 4º Congresso  Nacional de Biomecânica, L. Roseiro et. al, 4 a 5 Fevereiro 2011, Coimbra, pp. 231-235.
  67. H. Mata, RM Natal Jorge, AA Fernandes, RAF Valente, MPL Parente,  “FEM analysis of sandwich shells with metallic foam cores”, 14th International Conference on Sheet Metal (SHEMET 2011), 18-20 Abril, 2011, Leuven, Bélgica.
  68. H. Mata, MPL Parente, AA Fernandes, RM Natal Jorge, RAF Valente, A. Santos, “Numerical and experimental study of sandwich plates with metallic foam cores”, XI International Conference on Computational Plasticity (COMPLAS XI), 7-9 Setembro, 2011, Barcelona, Espanha.
  69. H. Mata, A. Santos, A.A. Fernandes, R.A.F. Valente, M.P.L. Parente,  R.M. Natal Jorge, “Analysis of sandwich shells with metallic foam cores based on the uniaxial tensile test”, The 14th International ESAFORM Conference on Material Forming (ESAFORM 2011), 27-29 Abril, 2011, Irlanda do Norte, Reino Unido
  70. H. Mata, R.A.F Valente, M.P.L . Parente, A.A Fernandes, A. Santos, R.M. Natal Jorge, “Caracterização mecânica de estruturas sandwich com núcleos de espuma metálica”, X Congresso Ibero-Americano em Engenharia Mecânica (CIBEM 10), 4-7 Setembro, 2011, Porto, Portugal.
  71. H. Mata, R.A.F Valente, M.P.L . Parente, A.A Fernandes, A. Santos, R.M. Natal Jorge, “Establishment of mechanical properties of sandwich shells with metallic foam cores”, X International Conference on Technology of Plasticity (ICTP 2011), 25-30 Setembro, 2011, Aachen, Alemanha.
  72. S. Meireles, A. Completo, C. Silva, J. Simões, C. Relvas, A. Ramos,  2011. Wrist kinematic behavior correlation with funcional outcomes and progress in patients having a total wrist arthroplasty. Proceedings of 24th Annual congress of International Society for Technology in Arthroplasty (ISTA), Bruges, Belgium 20-23 September.
  73. S. Meireles, A. Completo, C. Silva, A. Ramos, C. Relvas, 2011. Correlação entre o comportamento cinemático e os resultados funcionais e o progresso em pacientes com uma prótese total do punho. 4º Congresso  Nacional de Biomecânica, L. Roseiro et. al, 4 a 5 Fevereiro 2011, Coimbra, pp. 571-574.
  74. S. Meireles, A. Completo, C. Silva, J.A. Simões, Flores, P., 2011, Estudo cinético, cinemático e funcional do punho protésico comparado ao punho saudável e ao reumatóide em pacientes com uma prótese total do punho, Revista Portuguesa de Ortopedia e Traumatologia ,19(3), pg 283-296.
  75. P.A.A.P. Marques, Nanocarbons 2011: Carbon Nanotubes and Related Materials: From Physico-Chemical Properties to Biological and Environmental Effects, 6 - 11 September 2011, Italy.
  76. Joaquim Pinho-da-Cruz, Paulo M.M. Vila Real and Nuno Lopes, NOMOGRAMAS PARA O CÁLCULO EXPEDITO DA TEMPERATU-RA DE ELEMENTOS ESTRUTURAIS DE ALUMÍNIO SUJEITOS À ACÇÃO DO FOGO DE ACORDO COM O EUROCÓDIGO 9; VIII Congresso de Construção Metálica e Mista
  77. L.P. Perera, J.M. Rodrigues, R. Pascoal, C. Guedes Soares, 2011, “Development of an onboard decision support system for ship navigation under rough weather conditions”, Proc. of IMAM 2011, Rizzuto & Guedes Soares (eds), 2012 Taylor & Francis Group, London, ISBN 978-0-415-62081-9, 13-16 September 2011, Genoa Italy.
  78. R. Morais, N. Silva, P. Santos, C. Frias, J. Ferreira, A. Ramos, J. Simões, M. Reis, 2011, A vibration-based energy harvesting system for implantable biomedical telemetry systems, BIODEVICES 2010, International Joint Conference on Biomedical Engineering Systems and Technologies, 26-29 January, Roma, Italy.
  79. A. Ramos, C. Relvas, A. Completo, J. Simões, 2011. Effect of Geometric Variables in a New Cemented Hip Femoral Stem Concept. Proceedings of 24th Annual congress of International Society for Technology in Arthroplasty (ISTA), Bruges, Belgium 20-23 September.
  80. A. Ramos, C. Relvas, A. Completo, J.A. Simões, 2011. A new cemented hip prosthesis concept. Proceedings of the 2011 Design of Medical Devices Conference. April 12-14, 2011, Minneapolis, MN, USA.
  81. A. Ramos, A. Andrade de Campos, A. Completo, C. Relvas, J. A. Simões, 2011. Modelo numérico de previsão de falha de cimento ósseo na artroplastia da anca a longo prazo e validação in-vitro. 4º Congresso Nacional de Biomecânica, L. Roseiro et. al, 4 a 5 Fevereiro 2011, Coimbra, pp. 555-560.
  82. A. Ramos, A. Andrade-Campos, A. Completo, C. Relvas, J.A. Simões, 2011, Prevision of cement bone failure in a hip arthoplasty: numerical model and in vitro correlation results, ISB 2011 (international Society of Biomechanics), Brussels, July 3-7, pp:212.
  83. A. Ramos, A. Completo, C. Relvas, J.A. Simões, 2011, Design process of a novel cemented hip femoral stem concept, Journal of Medical Devices, vol. 5, 027503-1.
  84. A. Ramos, A. Completo, C. Relvas, J.A. Simões, Estudo do comportamento das interfaces na artroplastia cimentada da anca, Revista Portuguesa de Ortopedia e Traumatologia 19, suplemento I,pp:5-6.
  85. C. Ramos, A. Relvas, A. Completo, and J. A. Simões, 2011, Cement-bone interface and reamer geometry as critical in cracks initiation, an in vitro long-term failure risk of a Stanmore hip, International Society for Technology in Arthroplasty (ISTA), 20-23 September, Brugges, Belgium, pp: 212.
  86. C. Relvas, A. Ramos, A. Completo, J.A. Simões, 2011. Desenvolvimento de uma prótese do tornozelo: desafio projetual. 4º Congresso Nacional de Biomecânica, L. Roseiro et. al, 4 a 5 Fevereiro 2011, Coimbra, pp. 533-536.
  87. S. Meireles, A. Completo, C. Silva, A. Ramos, C. Relvas, J.A. Simões, Correlação entre o comportamento cinemático e os resultados funcionais e o progresso em pacientes com uma prótese total do punho, 4º CONGRESSO NACIONAL DE BIOMECÂNICA, L. Roseiro, M. Augusta et al (Eds), Coimbra, Portugal, 4 e 5 de Fevereiro, 2011.
  88. S.R. Marabuto, D. Afonso, J.A.F. Ferreira, F.Q. Melo, R.J. Alves de Sousa, (2011), “Finding the best machine for SPIF operations: A brief discussion”, Key Engineering Materials, Vol.473, pp.861-868,.
  89. Sandra M.A.Cruz, Gil Gonçalves, Carlos M. Granadeiro, Helena I.S. Nogueira José Grácio and Paula A.A.P. Marques, Nobel metal nanoparticles / graphene nanocomposites as SERS substrates for selective biodetection, 4th Iberian Meeting on Colloids and Interfaces University of Porto, from 13th to 15th July 2011, Portugal.
  90. A.D. Santos, H. Mata, A.A. Fernandes, RAF Valente, MPL Parente, RM Natal Jorge, “Analysis of sandwich shells with metallic foam cores based on uniaxial tensile tests”, International Deep Drawing Research Group Conference (IDDRG 2011), 5-8 Junho, 2011, Bilbao, Espanha.
  91. J.I.V.Sena, R.A.F. Valente, J.J. Grácio, F.J.P. Simões, R,J. Alves De Sousa, "Finite element analysis of incrementally formed parts", (2011) International Journal of Mechatronics and Manufacturing Systems, 4 (5), pp. 454-469.
  92. M. Soares dos Santos, J.A.F. Ferreira , A. Ramos, R. Pascoal, R. Morais dos Santos, N.M. Silva, J.A.O. Simões, M.J.C.S.Reis , C. Boeri, A. Festas, P. Santos, 2012, “Multi-source Energy Harvesting Power Generators for Instrumented Implants - Towards the Development of a Smart Hip Prosthesis”, Proc. of Bio Devices 2012, February 2012, Vilamoura Algarve."
  93. D. Steglich, W. Brocks, J.Bohlen, F. Barlat, 2011. Modelling direction-dependent Hardening in Magnesium Sheet Forming Simulations. International Journal of Material Forming 4, 243–253. doi:10.1007/s12289–011–1034–y.
  94. Surgery:118 Anterior cruciate ligament reconstruction5 Posterior cruciate ligament13 total knee artroplasty4 uni-compatimental knee artroplasty19 tibial osteotomy3 femoral osteotomy189 parcial meniscectomy14 meniscal suture
  95. T. Fontes, V. Lopes, L. Silva, J.M. Santos, J. Marques de Sá; NNIGnets, Neural Networks Software; Part I, IFIP AICT 363; 2011; 345-350.
  96. V.F. Neto, D. Mukherjee, L. Rino, J. C. Mendes, J. Gracio; Characterization of diamond coated Ti dental bits, International conference on Biomaterials and Implants: Prospects and Possibilities in the New Millennium, 21-23 July 2011, Kolkata, India"
  97. Joaquim. Pinho-da-Cruz, Paulo M.M. Vila Real and Nuno Lopes , VERIFICAÇÃO DA RESISTÊNCIA AO FOGO DE ELEMENTOS ESTRUTURAIS DE ALUMÍNIO EM SITUAÇÃO DE INCÊNDIO DE ACORDO COM O EUROCÓDIGO 9; VIII Congresso de Construção Metálica e Mista.
  98. L. Xu, F. Barlat, 2011, Macroscopic constitutive modeling of a TWIP steel sheet sample. Proceedings of the 1st International Conference on High Manganese Steels (HMnS 2011), May 15–18, 2011, Seoul, Korea, CDROM, Lee, Y.K., (Ed.), E–1, pp. 1–12.
  99. L. Xu, F. Barlat, 2011, Through–thickness compression testing and modeling of ferritic stainless steel sheets. Proc. Seventeenth International Symposium on Plasticity and its Current Applications. Puerto Vallarta, January 3–8, 2011, Khan, A.S., Meredith, C., Farrokh, B., (Eds.), CDROM ISBN 0-9659463–1–2, Neat Press, Fulton, Maryland, pp. 229–231.
  100. L. Xu, F. Barlat, D.C. Ahn, 2011. Plastic flow and localization in ferritic stainless steel. Proceedings PLASTICITY’11, Proc. Seventeenth International Symposium on Plasticity and its Current Applications. Puerto Vallarta, January 3–8, 2011, Khan, A.S., Meredith, C., Farrokh, B., (Eds.), CDROM ISBN 0-9659463–1–2, Neat Press, Fulton, Maryland, pp. 196–198.
Patents
  1. António Manuel Godinho Completo, Alexandrina Ferreira Mendes – “Bioreactor para caracterização biomecânica e bioquímica de construções bidimensionais e tridimensionais de engenharia tecidos em tempo real como função do estímulo mecânico”. Pedido de 28/11/2011;
  2. “A New Single Point Incremental Forming Machine”, provisory patent nº105888 PT;
  3. “Energy Absorption system including cork as active padding element”, utility model nº 104907 PT;
  4. US Patent Application 20110114227 - Grain refinement of metallic components by controlled strain path change.
last updated 31/12/2012
This web site uses cookies without storing personal information that allows the identification of its users. By navigating in this web site you are consenting to the use of these cookies.more information
For this page to function properly you must enable JavaScript execution. If this is not possible some features may be limited.