40 anos da UA
via aberta

information for...
 

Publications 2014

Books

 

1.                  2014 / Nasani N, Fagg DP, Novel Nitrate-free Acetate-H2O2 Combustion Synthesis, Combustion: Types of Reactions, Fundamental Processes and Advanced Technologies, ISBN: 978-1-62948-967-4, Nova Publishers, pp, 245-268.https://www.novapublishers.com/catalog/product_info.php?products_id=47568&osCsid=b

2.                  Lee, M.-G., Barlat, F., 2014. Modeling of plastic yielding, anisotropic flow and the Bauschinger effect. In: Comprehensive Materials Processing Technology, Volume 2: Materials Modelling and Characterization, Hashmi, S., Ed., Elsevier, pp. 235–260. doi:10.1016/B978-0-08-096532-1.00219-3

3.                  Guest-Editor with Dr. Jeong-Whan Yoon (Deakin University, Australia) of a Special Issue of International Journal of Plasticity in honor of Dr. Kwansoo Chung, Volume 58, Pages 1-238 (July 2014).

4.                  T.B. Stoughton, J.W. Yoon, “Stress-Based Forming Limit Curves”, Comprehensive Materials Processing, Vol.1, pp.71-84 (2014).

5.                  Moreira R, Varum H, Completo A, Rodrigues H, Silva Gomes J, Lopes N, Neto V. “CNME 2014 - Congresso Nacional de Mecânica Experimental -Livro de atas”. ISBN: 978-989-95695-5-3

6.                  Caseiro JF, Valente RAF, Sousa RJA, Numerical Tools for Isogeometric Analysis, Scholars’ Press, ISBN: 978-3-639-76112-2, 2015

7.                  Lamas, B; Oliveira, MSA; Martins, N; “Long-term nanofluids for heat transfer intensification: Nanofluids development and characterization”, Scholars Press, Release date: March 14, 2014 | ISBN-10: 3639711505 | ISBN-13: 978-3639711509.

 

Book Chapter

 

1.                   Campos AA, Vasconcelos P, Caseiro JF, Oliveira JA, Themomechanical modelling of multiphase steels: Classical and modern engineering analyses, Modern Mechanical Engineering, J. P. Davim (Ed.), Springer, ISBN: 978-3-642-45175-1, 2014

Web: http://www.springer.com/engineering/mechanical+engineering/book/978-3-642-45175-1

 

2.                   CN Boeri, FJ Neto da Silva, JAF Ferreira  (2014). “Modelling Codfish Drying: Comparison Between Artificial Neural Network, Diffusive and Semi-Empirical Models”. Mathematical Methods in Engineering,  published by Springer, pp 87-96

 

3.                  J.B. Sá de Farias, S. Marabuto, M.A.B.E. Martins, J.A.F Ferreira, A. Andrade Campos, and R.J. Alves de Sousa (2014). “Towards Smart Manufacturing Techniques Using Incremental Sheet Forming”, ZongWei Luo (ed). Smart Manufacturing Innovation and Transformation: Interconnection and Intelligence. 31 pages

 

4.                  A. Andrade-Campos, P. Vasconcelos, J.F. Caseiro, J.A. Oliveira, Thermomechanical modeling of multiphase steels: classical and modern engineering analyses; Modern Mechanical Engineering: Research, Development and Education (Materials Forming, Machining and Tribology series), (978-3-642- 45175-1 – Print, 978-3-642-45176-8 – Online), J. Paulo Davim (Ed.), Springer, 2014. http://link.springer.com/chapter/10.1007%2F978-3-642-45176-8_6

 

5.                  R.A.S. Moreira Structural Dynamics and Viscoelastic Passive Damping Treatments, Chapter 5. Modern Mechanical Engineering, Materials Forming, Machining and Tribology, J.P.Davim (ed.), Springer-Verlag Berlin Heidelberg, 2014 DOI: 10.1007/978-3-642-45176-8_5, pp:89-107.

 

6.                  Nasani N, Fagg DP, Novel Nitrate-free Acetate-H2O2 Combustion Synthesis, Combustion: Types of Reactions, Fundamental Processes and Advanced Technologies, ISBN: 978-1-62948-967-4, Nova Publishers, pp,245-268. 2014

 

7.                  2014 / Bandeira, J., Pereira, S.R., Fontes, T., Fernandes, P., Khattak, A.J., Coelho, M.C., An “Eco-traffic” assignment tool, Computer-based Modelling and Optimization in Transportation, Springer series Advances in Intelligent Systems and Computing Volume 262, pp. 41-56 / http://link.springer.com/chapter/10.1007/978-3-319-04630-3_4

 

International Scientific Papers

 

 

1.                  2014 / Sundar, L.S., Shusmitha, K., Singh, M.K., and Sousa, A.C.M., Electrical conductivity enhancement of nanodiamond–nickel (ND–Ni) nanocomposite based magnetic nanofluids, International Communications in Heat and Mass Transfer, 57, 2014, 1 – 7, DOI: 10.1016/j.icheatmasstransfer.2014.07.003.

 

2.                  2014 / Sundar, L.S., Venkata Ramana, E., Singh, M.K., and Sousa, A.C.M., Thermal conductivity and viscosity of stabilized ethylene glycol and water mixture Al2O3 nanofluids for heat transfer applications: An experimental study, International Communications in Heat and Mass Transfer,  56, 2014, 86 -95, DOI: 10.1016/j.icheatmasstransfer.2014.06.009.

 

3.                  2014 / Sundar, L.S., Singh, M.,  Ramana, E., Singh, B., Gracio, J.J.A., and Sousa, A.C.M., Enhanced Thermal Conductivity and Viscosity of Nanodiamond-Nickel Nanocomposite Nanofluids, Scientific Reports, 4, Article number: 4039 (doi:10.1038/srep04039; available online 10 February 2014).

4.                  2014 / Kopyl, S., Timopheev, A.,  Bystrov, V.,  Bdikin, I., Teixeira, B.M.S., Maevskij, E., Sobolev, N.A., and Sousa, A.C.M., FMR study of carbon nanotubes filled with Fe3O4 nanoparticles, Journal of Magnetism and Magnetic Materials, 358-359C, 2014, 44-49 (doi: http://dx.doi.org/10.1016/j.jmmm.2014.01.029).

5.                  2014 / Sundar, L.S., Singh, M.K., and Sousa, A.C.M., Enhanced heat transfer and friction factor of MWCNT–Fe3O4/water hybrid nanofluids, International Communications in Heat and Mass Transfer, 52, 2014, 73-83, DOI: 10.1016/j.icheatmasstransfer.2014.01.012.

6.                  2014 / Sundar, L.S., Singh, M.K., Bidkin, I., Sousa, A.C.M., Experimental investigations in heat transfer and friction factor of magnetic Ni nanofluid flowing in a tube, International Journal of Heat and Mass Transfer, 70, 2014, 224-234, DOI: 10.1016/j.ijheatmasstransfer.2013.11.004.

7.                  2014 / Mahshid Hadavand, M. and Sousa, A.C.M., Lattice Boltzmann method for threedimensional simulation of laminar slipflow and heat transfer in a microchannel, Advances and Applications in Fluid Mechanics, 15, 1, 2014, 81-100, ISSN: 09734686, http://www.pphmj.com/abstract/8220.htm

8.                  2014 / E.V. Shalaeva, M.V. Patrakeev, A.A. Markov, A.P. Tyutyunnik, A.M. Murzakaev, V.V. Kharton, E.V. Tsipis, J.C. Waerenborgh, I.A. Leonidov and V.L. Kozhevnikov, Ion transport in dual-phase SrFe1−xТаxO3−δ (x=0.03−0.10): effects of redox cycling, Journal of Solid State Electrochemistry, accepted for publication / Artigos em revistas internacionais / http://link.springer.com/article/10.1007%2Fs10008-014-2698-2

9.                  2014 / I. Kuritsyna, V. Sinitsyn, A. Melnikov, Yu. Fedotov, E. Tsipis, A. Viskup, S. Bredikhin and V. Kharton, Oxygen exchange, thermochemical expansion and cathodic behavior of perovskite-like Sr0.7Ce0.3MnO3-d, Solid State Ionics, 2014, vol. 262, pp. 349-353 / Artigos em revistas internacionais / http://www.sciencedirect.com/science/article/pii/S0167273813005924

10.              2014 / A.A. Reddy, A. Goel, D.U. Tulyaganov, M. Sardo, L.Mafra, M.J. Pascual, V.V. Kharton and E.V. Tsipis, V.A. Kolotygin and J.M. F. Ferreira, Thermal and mechanical stability of lanthanide-containing glass–ceramic sealants for solid oxide fuel cells, Journal of Materials Chemistry A, 2014, vol. 2, pp. 1834-1846 / Artigos em revistas internacionais / http://pubs.rsc.org/en/Content/ArticleLanding/2014/TA/c3ta13196c#!divAbstract

11.              2014 / I.E. Kuritsyna, V.V. Sinitsyn, Y.S. Fedotov, S.I. Bredikhin, E.V. Tsipis and V.V. Kharton, Stability and functional properties of Sr0.7Ce0.3MnO3-δ as cathode material for solid oxide fuel cells, Russian Journal of Electrochemistry, 2014, vol. 50, pp. 713-718 / Artigos em revistas internacionais / http://link.springer.com/article/10.1134%2FS1023193514080084

12.              2014 / M.M. Vieira, J.C. Oliveira, A.L. Shaula, B. Trindade, A. Cavaleiro. Structure and ionic conductivity of reactively sputtered apatite-type lanthanum silicate thin films. Surface and Coatings Technology, 2014, vol. 247, pp. 14-19 / Artigo em revista internacional / http://dx.doi.org/10.1016/j.surfcoat.2014.02.064

13.              N. Nasani, D. Ramasamy, S. Mikhalev, A. V. Kovalevsky, D. P. Fagg, Fabrication and electrochemical performance of a stable, anode supported thin BaCe0.4Zr0.4Y0.2O3-d electrolyte Protonic Ceramic Fuel Cell, J.Power Sources, 278 (2015) 582, DOI:10.1016/j.jpowsour.2014.12.124

 

14.              D. Pukazhselvan, J. Perez, R. Beja, C. M. V. Lopes, F. Queiros de Melo and D. P. Fagg, Simulation studies and safety analysis of high pressure milling vials for the direct synthesis of high capacity metal hydrides, Int. J. Hydrogen Energy, DOI:10.1016/j.ijhydene.2014.11.142

 

 

15.              N.Narendar, D.Ramasamy, A.D.Brandao, A.A. Yaremchenko, D.P. Fagg, The impact of porosity, pH2 and pH2O on the polarisation resistance of Ni-BaZr0.85Y0.15O3-d cermet anodes for Protonic Ceramic Fuel Cells (PCFCs), Int.J.Hydrogen Energy, DOI:10.1016/j.ijhydene.2014.10.093

 

16.              D.Pukazhselvan, I.Antunes, S.L.Russo, J.Perez, D.P.Fagg, Synthesis of catalytically active rock salt structured MgxNb1-xO nanoparticles for MgH2 system, Int.J.Hydrogen Energy, 39 (2014) 18984, DOI: 10.1016/j.ijhydene.2014.08.138

 

17.              K.V. Zakharchuk, A.A.Yaremchenko, D.P.Fagg, “Ni-YSZ cermets for solid oxide fuel cell anodes via two-step firing” Int.J.Hydrogen Energy, 39 (2014) 15046, DOI: 10.1016/j.ijhydene.2014.07.053

 

18.              K.V. Zakharchuk, A.A. Yaremchenko, D.P. Fagg, “Electrical properties and Thermal Expansion of Strontium Aluminates” J.Alloys and Compounds 613(2014)232-237, DOI: 10.1016/j.jallcom.2014.05.225

 

19.              D.Araújo de Macedoa, M.R.Cesárioa, D.Maria de Araujo Meloa, R.M.Nascimentoa, C.A.Paskocimasa, A.E.Martinellia, D.P.Fagg, “Microwave Assisted Self-Combustion Synthesis and Electrochemical Performance of LSCF-SDC Composite Cathodes” ECS Trans.53(22)(2013)7-15, DOI: 10.1149/05322.0007ecst

 

20.              N.Nasani, P.A.N.Dias, J.A.Saraiva, D.P.Fagg, “Synthesis and conductivity of Ba(Ce,Zr,Y)O3-d electrolytes for PCFCs by new nitrate-free combustion method,” Int.J.Hydrogen Energy, 38(20)(2013)8461-8470, DOI: 10.1016/j.ijhydene.2013.04.078

21.              P. Areias, A. Pinto da Costa, T. Rabczuk, F. Queiros de Melo, D. Dias da Costa and Mourad Bezzeghoud,  An Alternative Formulation for Quasi-Static Frictional and Cohesive Contact, Computational Mechanics, Comput Mech, Vol 53 Nº 4, 807-824, 2014, DOI 10.1007/s00466-013-0932-x

22.              X. Xue, J. Liao, G. Vincze, J. Gracio, Twist springback of asymmetric thin-walled tube in mandrel rotary draw bending process. Procedia Engineering, v81, 2014, p2177-2183. The 11th International Conference on Technology of Plasticity, ICTP2014, 19-24 October 2014, Nagoya, Japan.

23.              X. Xue, J. Liao, G. Vincze, J.J. Gracio, Modelling of mandrel rotary draw bending for accurate twist springback prediction of an asymmetric thin-walled tube, Journal of Materials Processing Technology, Volume 216, February 2015, Pages 405-417, 2014.

24.              W. Wen, M. Borodachenkova, C.N. Tomé, G. Vincze, E.F. Rauch, F. Barlat and J.J. Grácio, Mechanical behavior of Mg subjected to strain path changes: experiments and modeling, International Journal of Plasticity, In Press, Corrected Proof, 2014.

25.              M.C. Butuc, G. Vincze, F. Barlat and J.J. Grácio, Plastic instability of FCC metals predicted by advanced constitutive equations, Conference Proceedings, IDDRG 2014, pp. 491-496.

26.              Hariharan, K., Nguyen, N.T., Chakraborti, N., Lee, M.G., Barlat, F., 2014. Multi-objective genetic algorithm to optimize variable drawbead geometry for tailor welded blanks made of dissimilar steels. Steel Research International 85, 1597–1607. doi:10.1002/srin.201300471

27.              Nguyen, N.T., Hariharan, H., Barlat, F., Lee, M.G., 2014. Design of high strength differential TWB drawability: FE study and optimization. Int. J. Precision Engineering Manufacturing 15, 2273-2283. doi:10.1007/s12541-014-0591-7

28.              Liao, J., Xue, X., Barlat, F., Gracio, J.J., 2014. On twist springback prediction of asymmetric tube in rotary draw bending with different constitutive models. Int. J. Mechanical Science 89, 311-322. doi: 10.1016/j.ijmecsci.2014.09.016

29.              Hariharan, K., Nguyen, N.T., Barlat, F., Lee, M.G., Kim, J.H., 2014. A pragmatic approach to accommodate in-plane anisotropy in forming limit diagram. Mechanics Research Communications 62, 5-17. doi:10.1016/j.mechrescom.2014.07.007

30.              Saeidi, N., Ashrafizadeh, F., Niroumand, B., Barlat, F., 2014. Evaluation of fracture micromechanisms in a fine-grained dual phase steel during uniaxial tensile deformation. Steel Research International 85, 1386–1392. doi:10.1002/srin.201300344

31.              Saeidi, N., Ashrafizadeh, F., Niroumand, B., Forouzan, M.R., Barlat, F., 2014. Damage mechanism and modeling of void nucleation process in a ferrite-martensite dual phase steel. Engineering Fracture Mechanics 127, 97-103. doi:10.1016/j.engfracmech.2014.05.017

32.              Kim, J.H., Barlat, F., Pierron, F., Lee, M.-G., 2014. Determination of the anisotropic plastic constitutive parameters using the virtual fields method. Experimental Mechanics 54, 1189-1204. doi:10.1007/s11340-014-9879-x

33.              Hariharan, K., Barlat, F., Lee, M.G., Prakash, R.V., 2014. Extension of strain-life equation for anisotropic sheet metals using anisotropic yield criteria and distortional hardening model. Fatigue & Fracture of Engineering Materials & Structures 37, 977-991. doi:10.1111/ffe.12162

34.              Revil-Baudard, B., Chandola, N., Cazacu, O., Barlat, F., 2014. Correlation between Swift effects and tension-compression asymmetry in various polycrystalline materials. J. Mech. Phys. Solids 70, 104-115. doi:10.1016/j.jmps.2014.05.012

35.              Ha, J., Lee, J.W., Kim, J.H., Barlat, F., Lee, M.G., 2014. Mesoscopic analysis of strain path change effect on the hardening behavior of dual-phase steel. Steel Research International 85, 1047-1057. doi:10.1002/srin.201300186

36.              Barlat, F., Vincze, G., Grácio, J.J., Lee, M.G., Rauch, E.F., Tomé, C., 2014. Enhancements of homogenous anisotropic hardening model and application to mild and dual-phase steels. Int. J. Plasticity 58, 201-218. doi:10.1016/j.ijplas.2013.11.002

37.              Bok, H., Choi, J.W., Barlat, F., Suh, D.W., Lee, M.G. 2014. Thermo-mechanical-metallurgical modeling for hot-press forming in consideration of the prior austenite deformation effect. Int. J. Plasticity 58, 154-183. doi:10.1016/j.ijplas.2013.12.002

38.              Kwon, H., Lee, M.G., Chung, Y., Barlat, F., Uhm, S., 2014. Influence of tempering temperature on fatigue and mechanical properties of high strength steel. ISIJ international 54, 979-984. doi:10.2355/isijinternational.54.979

39.              Soare, S., Barlat, F., 2014. About the influence of hydrostatic pressure on the yielding and flow of metallic polycrystals. J. Mech. Phys. Solids 67, 87–99. doi:10.1016/j.jmps.2014.02.004

40.              Hariharan, K., Chakraborti, N., Barlat, F., Lee, M.G., 2014. A Novel Multi-objective Genetic Algorithms Based Calculation of Hill’s Coefficients. Metallurgical and Materials Transactions A45, 2704-2707. doi:10.1007/s11661-014-2274-5

41.              Liao, J., Xue, X., Zhou, C., Barlat, F., Gracio, J., 2014. A semi-analytic model to predict and compensate springback in the 3D stretch bending process. Steel Research International 85, 697-709. doi:10.1002/srin.201300216

42.              Tamimi, S., Correia, J.P., Lopes, A.B., Ahzi, S., Barlat, F., Gracio, J.J., 2014. Asymmetric rolling of thin AA-5182 sheets: Modeling and experiments. Mat. Sci. Eng. A603, 150-159. doi:10.1016/j.msea.2014.02.048

43.              Taylor, M.D., Choi, K.S., Sun, X., Matlock, D.K., Packard, C.E., Xu, L., Barlat, F., 2014. Relationship between micro- and macro- properties for eight commercial DP980 steels. Mat. Sci. Eng. A597, 431-439. doi: 10.1016/j.msea.2013.12.084

44.              Kim, C., Lee, J.U., Barlat, F., Lee, M.G., 2014. Frictional behaviors of a mild steel and a TRIP780 steel under a wide range of contact stress and sliding speed. J. Tribology 136, 021606-1~7. doi:10.1115/1.4026346

45.              Cazacu, O., Revil-Baudard, B., Barlat, F., 2014. New Interpretation of Cyclic Swift Effects. European J. Mechanics A/Solids 44, 92-90. doi:10.1016/j.euromechsol.2013.10.005

46.              Ha, J., Kim, J.H., Barlat, F., Lee, M.G., 2014. Continuous strain path change simulations for sheet metal. Comp. Mat. Sci. 82, 286-292. doi:10.1016/j.commatsci.2013.09.042

47.              Rui P.R. Cardoso and Cesar de Sa, J. (2014) Blending moving least squares techniques with NURBS basis functions for nonlinear isogeometric analysis. Computational Mechanics. vol. 53, pp. 1327-1340.

48.              Areias, P., Cesar de Sa, J. and Rui P.R. Cardoso. A simple assumed-strain quadrilateral shell element for finite strains and fracture. Engineering with Computers. (2014), DOI 10.1007/s00366-014-0376-8.

49.               Borodachenkova, M., Barlat, F., Wen, W., Bastos, A., Gracio, J.J. A microstructure-based model for describing the material properties of Al-Zn alloys during high pressure torsion. International Journal of Plasticity, 2014.

50.               Borodachenkova, M., Wen, W., Barlat, F., Pereira, A., Grácio, J.J. Numerical simulation of the mechanical response during strain path change: application to Zn alloys. Procedia Engineering, Vol. 81, pp. 1300-1305, 2014.

51.               Y. Lou, J.W. Yoon, H. Huh, “Modeling of shear ductile fracture considering a changeable cut-off value for stress triaxiality”, Int. J. Plasticity, Vol.54, pp. 56-80 (2014). 

52.               J.W. Yoon, Y. Lou, J.H. Yoon, M. Glazoff, “Asymmetric Yield function Based on the Stress Invariants for Pressure Sensitive Metals”, International Journal of Plasticity, Vol.56, pp. 184-202 (2014). 

53.               J.W. Yoon, F. Barlat, “Editorial : In honor of Kwansoo Chung”, International Journal of Plasticity, Vol.58, pp.1-2 (2014).

54.               P.Y. Manach, S. Thuillier, J.W. Yoon, J. Coër, H. Laurent, “Kinematics of Portevin-Le Chatelier Bans in Simple Shear, International Journal of Plasticity, Vol.58, pp.66-83 (2014).  

55.               M. Safaei, J.W. Yoon, W. De Waele, “Study on the definition of equivalent plastic strain under non-associated flow rule”, International Journal of Plasticity, Vol.58, pp.219-238 (2014).  

56.              D.Y. Seong, M.Z. Haque, J.B. Kim, T.B. Stoughton, J.W. Yoon, “Suppression of necking in incremental sheet forming, International Journal of Solids and Structures, Vol.51, No.15-16, pp.2840-2849 (2014).

57.              Duarte, R., Ramos, A., Completo, A., Relvas, C., Simões, A. 2014. “The importance of femur/acetabulum cartilage in the biomechanics of the intact hip: experimental and numerical assessment”. Computer Methods in Biomechanics and Biomedical Engineering, 18, 880-889.

58.              Ramos, A., Mesnard, M., Relvas, C., Completo, A., Simões, A. 2014. “Theoretical assessment of an intramedullary condylar component versus screw fixation for the condylar component of a hemiarthroplasty alloplastic TMJ replacement system”. Journal of Cranio-Maxillofacial Surgery, 42, 169-174.

59.              Castro, A., Completo, A., Flores, P., Simões, A. 2014. “Biomechanical behaviour of cancellous bone on patellofemoral arthroplasty with journey prosthesis: a finite element study”. ”. Computer Methods in Biomechanics and Biomedical Engineering, 18(10), 1090-1098.

60.              Bandeiras C., Completo A., Ramos A., 2014. “Simulation of remodeling of tissue engineered condylar cartilage under static hydrostatic pressure” Biondental Engineering, 83-87 – Natal Jorge et al. (eds) Taylor&Francis Group, DOI: 10.1201/b17071-1

61.              Ricardo J. Duarte, Antonio Ramos and Michel Mesnard, The influence of disc wear on the behavior of the temporomandibular joint: a finite element analysis in a specific case, Advances in Biomechanics & Applications  Volume 1, Number 3, September 2014, pages 159-167, DOI: http://dx.doi.org/10.12989/aba.2014.1.3.159

62.              M. Mesnard, A. Ramos, N. Perry, Managing the variability of biomechanical characteristics before the preliminary design stage of a medical device, CIRP Annals - Manufacturing Technology, Volume 63, Issue 1, 2014, Pages 161-164,

63.              M. Mesnard, A. Ramos, J.A. Simões, Influences of implant condyle geometry on bone and screw strains in a temporomandibular implant, Journal of Cranio-Maxillofacial Surgery, Volume 42, Issue 3, April 2014, Pages 194-200,

64.              Sedarat, C., De Chalvron, S., Ella, B., Mesnard, M., Ramos, A. Risk factors for implant treatment failure: A case-control study. (2014) Biodental Engineering II - Proceedings of the 2nd International Conference on Biodental Engineering, BIODENTAL 2012, pp. 85-88.

65.              Ramos, A. and Mesnard, M, Load transfer in Christensen® TMJ in alloplastic Total Joint Replacement for two different mouth apertures, Journal of Cranio-Maxillo-Facial Surgery 42 (2014), pp. 1442-1449 DOI information: 10.1016/j.jcms.2014.04.008

66.              AOUN M., MESNARD M., MONEDE-HOCQUARD L. & RAMOS A., 2014, Stress analysis in the temporomandibular joint disc during maintained clenching using a viscohyperelastic finite element model, Journal of Oral and Maxillofacial Surgery, Volume 72, Issue 6, June 2014, Pages 1070-1077.

67.              Bandeiras C., Completo A., Ramos A., 2014. “Compression, shear and bending on tissue-engineered cartilage: a numerical study”. Computer Methods in Biomechanics and Biomedical Engineering, 17, 2. doi: 10.1080/10255842.2014.931047.

68.              Paulo Roriz, Lídia Carvalho, Orlando Frazão, José Luís Santos, José António Simões, From conventional sensors to fibre optic sensors for strain and force measurements in biomechanics applications: A review, Journal of Biomechanics, Volume 47, Issue 6, 11 April 2014, Pages 1251-1261, ISSN 0021-9290, http://dx.doi.org/10.1016/j.jbiomech.2014.01.054.

69.             J. I. V. de Sena, C.F. Guzman, L. Duchene, A. M. Habraken, R. A. Valente, R. J. Alves de Sousa, (2015) “Simulation of a Two-Slope Pyramid Made by SPIF using an Adaptive Remeshing Method with Solid-Shell Finite element”, International Journal of Material Forming, accepted for publication.

70.              Lamas, B;  Abreu, B; Fonseca, M ; Martins, N; Oliveira, MSA; "Critical analysis of the thermal conductivity models for CNT based nanofluids", International Journal of Thermal Sciences 78:65 (2014) Web: http://dx.doi.org /10.1016/j.ijthermalsci.2013.11.017

71.               H.Z. Poor, H. G. Menghari, R. J. Alves de Sousa, H. Moosavi, M. Parastarfeizabadi, M. Farzin, and H. Sane, “A Novel Approach in Manufacturing Two-Stepped Tubes using a Multi-Stage Die in Tube Hydroforming Process”, International Journal of Precision Engineering and Manufacturing Vol. 15 (11), 2014, pp. 1-8, 2014

72.               H.Z. Poor, H. Moosavi, H. G. Menghari, R.J. Alves de Sousa Investigation of Punch Nose Radius and Punch-Die Clearance on Thinning and Puckering in Hydro‐Mechanical Deep Drawing Process, International Journal of Mechanic Systems Engineering (IJMSE) Vol. 4 Issue 2, 2014

73.              E. Ferreira, J. Pinho-da-Cruz, A. Andrade-Campos, An optimized loading path for material parameters identification in elastoplasticity, Key Engineering Materials 611-612:1734-1741, doi: 10.4028/www.scientific.net/KEM.611-612.1734, 2014

74.              H.G.Menghari, H.Z. Poor, M. Farzin and R.J. Alves de Sousa, An approach to improve thickness distribution and corner filling of copper tubes during hydro-forming processes, SEM Structural Engineering and Mechanics, Vol. 50, 2014, 563-573, DOI: 10.12989/sem.2014.50.4.563

75.              J. F. Caseiro, R. A. F. Valente, A. Reali, J. Kiendl, F. Auricchio e R. J. Alves de Sousa, On the Assumed Natural Strain method to alleviate locking in solid-shell NURBS-based finite elements, Computational Mechanics, 53(6), 1341-1353, 2014 Web: http://link.springer.com/article/10.1007%2Fs00466-014-0978-4

76.              R.J. Alves de Sousa, J.A.F. Ferreira, J.B. Sá de Farias, J.N.D. Torrão, D.G. Afonso and M.A.B.E Martins, SPIF-A: on the development of a new concept of incremental forming machine, SEM Structural Engineering and Mechanics, Vol. 49, No. 5 (2014) 645-660, DOI: http://dx.doi.org/10.12989/sem.2014.49.5.645

77.              Grilo, T.J., Alves de Sousa, R.J., Valente, R.A.F., Assessment on the performance of distinct stress integration algorithms for complex non-quadratic anisotropic yield criteria, International Journal of Material Forming (2014), Volume 7, Issue 2, pp 233-247

78.              F.A.O. Fernandes, R.J.S. Pascoal, R.J. Alves de Sousa, Modelling impact response of agglomerated cork, Materials and Design, Vol. 58 (2014) 499–507, http://dx.doi.org/10.1016/j.matdes.2014.02.011

79.              Abreu, B; Lamas, B; Fonseca, M; Martins, N; Oliveira, MSA; “Experimental characterization of convective heat transfer with MWCNT based nanofluids under laminar flow conditions“Heat and Mass Transfer, Volume 50, Issue 1, pp 65-74 (2014) http://dx.doi.org/10.1007/s00231-013-1226-8

80.             P. Vasconcelos, A. Gießmann, J.A Oliveira, A. Andrade-Campos, Heat treatments analysis of steel using coupled phase field and finite element methods, Key Engineering Materials 611-612:117–124, 2014 http://www.scientific.net/KEM.611-612.117

81.               B. Coelho, A. Andrade-Campos, Efficiency achievement in water supply systems — A review, Renewable and Sustainable Energy Reviews, 30:59-84, doi:10.1016/j.rser.2013.09.010, 2014

82.              Nanotechnology – towards real improvements in the energy efficiency of bluidings, Bruno Lamas, Bruno Abreu, Alexandra Fonseca, Nelson Martins and Mónica Oliveira, Nano Magazine, issue 28, February 2014, pp 37

83.              Isabel Duarte, Matej Vesenjak, Lovre Krstulović-Opara. Variation of quasi-static and dynamic compressive properties in a single aluminium foam block . Materials Science and Engineering A 10/2014; 616:171-182. http://dx.doi.org/10.1016/j.msea.2014.08.002

84.             Isabel Duarte, Matej Vesenjak, Lovre Krstulović-Opara. Dynamic and quasi-static bending behaviour of thin-walled aluminium tubes filled with aluminium foam. Composite Structures 03/2014; 109: 48–56. http://dx.doi.org/10.1016/j.compstruct.2013.10.040.

85.              Isabel Duarte, José MF Ferreira. Evolution of Metallic Foams Using Hot-stage Microscopy. Procedia Materials Science. 01/2014; 4:239–244. http://dx.doi.org/10.1016/j.mspro.2014.07.615.

86.             Isabel Duarte, Matej Vesenjak, Lovre Krstulović-Opara. Variation of quasi-static and dynamic Compressive properties in Al-alloy Foam Block. Procedia Materials Science 01/2014; 4: 151–156. http://dx.doi.org/10.1016/j.mspro.2014.07.580.

87.              Isabel Duarte, José MF Ferreira. 2D Quantitative Analysis of Metal Foaming Kinetics by Hot-Stage Microscopy. Advanced Engineering Materials 01/2014; 16(1): 33–39. http://dx.doi.org/10.1002/adem.201300171.

88.             M. Soares dos Santos, J.A.F. Ferreira, A. Ramos, J.A.O. Simões, R. Morais, N.M. Silva, P.M. Santos, M.C. Reis, T. Oliveira, Instrumented hip joint replacements, femoral replacements and femoral fracture stabilizers, Expert Rev Med Devices 11 (6) (2014) 617 – 635.

89.             Boeri, CN , Neto da Silva, FJ, Ferreira, JA. Characteristic curves of the codfish drying kinetics with thin-layer simulation models. Journal of Food Processing and Preservation, February 2014, Volume 38, Issue 1, pp 169–174

90.             R J Alves De Sousa, J A F Ferreira, J B Sá De Farias, J N D Torrão, D G Afonso, M A B E Martins (2014).  “SPIF-A: on the development of a new concept of incremental forming machine”. Structural Engineering & Mechanics 02/2014; 49:1225-4568.

91.              D.Pérez-Coll, G.Heras-Juaristi, D.P.Fagg, G.C.Mather, Transport-number determination of a protonic ceramic electrolyte membrane via electrode-polarisation correction with the Gorelov method, J.Power Sources 245(2014)445-455, DOI: 10.1016/j.jpowsour.2013.06.155

92.              M.C.Matesanz, M.Vila, M.J.Feito, J.Linares, G.Gonçalves, M.Vallet-Regi, P.A.A.P.Marques, M.T.Portolés. Graphene oxide nanosheets localized on f-actin filaments Induce cell cycle alterations in different cell types. Biomaterials 34 (2013) 1562-9. IF = 7.604 http://dx.doi.org/j.biomaterials.2012.11.001

93.              Krishna, R.,Titus, E.,Okhay, O., Venkata Ramana, E.,Gracio, J.J.A.,

Rapid electrochemical synthesis of hydrogenated graphene oxide using Ni nanoparticles

International Journal of Electrochemical Science, 2014, Vol. 9 Issue 7, p4054

 

94.              A. V. Kovalevsky, A. A. Yaremchenko, S. Populoh, P. Thiel, D. P. Fagg, A. Weidenkaff and J. R. Frade,

Towards a high thermoelectric performance in rare-earth substituted SrTiO3: effects provided by strongly-reducing sintering conditions,

Phys. Chem. Chem. Phys., 16 (2014) 26946-26954,

DOI: 10.1039/c4cp04127e

 

95.              D.Pukazhselvan, Giovanni Capurso, Amedeo Maddalena, Sergio Lo Russo, Duncan P. Fagg,

Hydrogen storage characteristics of magnesium impregnated on the porous channels of activated charcoal scaffold,

Int.J.Hydrogen Energy, 39, 35 (2014) 20045,

DOI:10.1016/j.ijhydene.2014.10.038

 

96.              N.Narendar, Z-J. Wang, M.G. Willinger, A.A. Yaremchenko, D.P. Fagg,

In-situ redox cycling behavior of Ni-BaZr0.85Y0.15O3-d cermet anodes for Protonic Ceramic Fuel Cells, Int.J.Hydrogen Energy,

DOI:10.1016/j.ijhydene.2014.09.136

 

97.              Z.Sherafat, I.Antunes, C.Almeida, J.R.Frade, M.H.Paydar, G.C.Mather, D.P.Fagg,

“Enhanced BaZrO3 mechanosynthesis by the use of metastable ZrO2 precursors”

Dalton transactions, 43(2014)9324,

DOI: 10.1039/c4dt00683f

 

98.              A.Kaushal, S.M.Olhero, B.Singh, D.P.Fagg, I.Bdikin, J.M.F.Ferreira,

“Impedance analysis of 0.5Ba(Zr0.2Ti0.8)O 3-0.5(Ba0.7Ca0.3)TiO3 ceramics consolidated from micro-granules” Ceramics International, 40(7, PART B)(2014)10593,

DOI: 10.1016/j.ceramint.2014.03.038

 

99.              Kopyl, S., Timopheev, A., Bystrov, V., Bdikin, I., Teixeira, B.M.S., Maevskij, E., Sobolev, N.A., and Sousa, A.C.M.,

FMR study of carbon nanotubes filled with Fe3O4 nanoparticles, Journal of Magnetism and Magnetic Materials 358-359C (2014), pp. 44-49

DOI: 10.1016/j.jmmm.2014.01.029

 

100.          V. S. Bystrov, E. Seyedhosseini, S. Kopyl, I. K. Bdikin, A. L. Kholkin.

Piezoelectricity and ferroelectricity in biomaterials: Molecular modeling and piezoresponse force microscopy measurements,

Journal of Applied Physics, 116, 066803

http://dx.doi.org/10.1063/1.4891443

 

101.          Sandra M.A. Cruz, Helena I.S. Nogueira and Paula A.A.P. Marques*

Potentialities of polymeric electrospun membranes decorated with silver nanoparticles and graphene oxide for biodetection by SERS

Science & Technology of Materials, Biomaterials Special Issue, accepted for publication on 29th December 2014

 

102.          Evelina Enqvist, Dmitrij Ramanenka, PAAP Marques, José Gracio, Nazanin Emami

The effect of ball milling time and rotational speed on ultra high molecular weight polyethylene reinforced with multiwalled carbon nanotubes

Polymer Composites,2014, 10/2014;

DOI: 10.1002/pc.23275; IF= 1.48

 

103.          G Gonçalves, M Vila, I Bdikin, A de Andrés, N Emami, RAS Ferreira, LD Carlos, J Grácio, PAAP Marques*

Breakdown into nanoscale of graphene oxide: Confined hot spot atomic reduction and fragmentation

Nature Scientific Reports, 4 (2014) 6735

DOI: 10.1038/srep06735, IF = 5.078

 

104.          J Linares, MC Matesanz, M Vila, MJ Feito, G Gonçalves , M Vallet-Regí, PAAP Marques, MT Portolés

Endocytic Mechanisms of Graphene Oxide Nanosheets in Osteoblasts, Hepatocytes and Macrophages

ACS Appl. Mater. Interfaces, 6 (2014) 13697−13706; IF = 5.008

http://dx.doi.org/10.1021/am5031598

 

105.          MJ Feito, M Vila, MC Matesanz, J Linares, G Gonçalves, PAAP Marques, M Vallet-Regí, JM Rojo, MT Portolés

In vitro evaluation of graphene oxide nanosheets on immune function

J Colloid Interface Sci. 432 (2014) 221-228; IF = 3.172

http://dx.doi.org/10.1016/j.jcis.2014.07.004

 

106.          G Gonçalves, SMG Pires, MMQ Simoes*, MPMS Neves and PAAP Marques*

Three-dimensional graphene oxide: A promising green and sustainable catalyst for oxidation reactions at room temperature

Chem. Commun., 50 (2014) 7673—7676; IF= 6.378

http://dx.doi.org/10.1039/C4CC02092H

 

107.          SAO Santos, RJB Pinto, SM Rocha, PAAP Marques, C Pascoal Neto, AJD Silvestre, CSR Freire

Unveiling the chemistry behind the green synthesis of metal nanoparticles

ChemSusChem. 2014 Aug 1. IF = 7.475

http://dx.doi.org/10.1002/cssc.201402126

 

108.          RJB Pinto, LAD Carlos, PAAP Marques, AJD Silvestre, CSR Freire

An overview of luminescent bio-based composites (Review)

J Appl Polym Sci J. 2014,  accepted for publication. IF = 1.600

http://dx.doi.org/10.1002/APP.41169 

 

109.          M Vila, MC Matesanz, G Gonçalves, MJ Feito, J Linares, PAAP Marques, MT Portoles, M Vallet-Regí.

Triggering cell death by nanographene oxide mediated hyperthermia

Nanotechnology 25 (2014) 035101. IF = 3.842

http://dx.doi.org/10.1088/0957-4484/25/3/035101

 

110.          S.Lin, C.T. Chen, I.Bdikin, V. Ball, J. Gracio, M.J.Buehler, Tuning heterogeneous poly(dopamine) structures and mechanics: in silico covalent cross-linking and thin film nanoindentation, SOFT MATTER 10, 457-464 (2014). (3.9) DOI: 10.1039/c3sm51810h

111.          I. Bdikin, Budhendra Singh, J. Suresh Kumar, M.P.F. Graça, A.M. Balbashov, J. Grácio, A.L. Kholkin, Nanoindentation induced piezoelectricity in SrTiO3 single crystals, Scripta Materialia 74, 76-79 (2014). (3.1) DOI: 10.1016/j.scriptamat.2013.11.003

 

112.          Radheshyam Rai, M.A. Valente, Igor Bdikin, Andrei L. Kholkin, Seema Sharma,

Study of electrical and magnetic properties of Ba, La and Pb doped Bi1−x−yDyxCyFe1−yTiyO3 perovskite ceramics,

Solid State Communications 180, 56-63 (2014).

DOI: 10.1016/j.ssc.2013.11.005

 

113.          Fabio G. N. Figueiras, Igor K. Bdikin, Vitor B. S. Amaral, Andrei L. Kholkin,

Local bias induced ferroelectricity in manganites with competing charge and orbital order states,

Physical Chemistry 16, 4977-81, 2014. 

DOI: 10.1039/c4cp00075g

 

114.          Ensieh Seyedhosseini,  Maxim Ivanov,  Vladimir Bystrov,  Igor Bdikin,  Pavel Zelenovskiy, Vladimir Ya. Shur,  Andrei Kudryavtsev,  Elena D. Mishina,  Alexander S. Sigov,  Andrei L. Kholkin,

Growth and Nonlinear Optical Properties of β-Glycine Crystals Grown on Pt Substrates,

CRYSTAL GROWTH & DESIGN  Volume: 14   Issue: 6   Pages: 2831-2837   Published: JUN 2014. impact 4.558.

DOI: 10.1021/cg500111a

 

115.          E.C.Lima, E.B.Araujo, I.K.Bdikin, A.L.Kholkin,

Effect of Composition on the Physical Properties at Nanoscale of PZT Thin Films,

Ferroelectrics, 465, 106-114, 2014.

DOI: 10.1080/00150193.2014.894391

 

116.          R.M.F. Baptista, D. Isakov, M.M.M. Raposo, M. Belsley, I. Bdikin, A.L. Kholkin, S.P.G. Costa, E.D. Gomes,

Ferroelectric nanofibers with an embedded optically nonlinear benzothiazole derivative,

J. of Nanoparticle Research 16, 2502, 2014.

DOI: 10.1007/s11051-014-2502-3.

 

117.          A Kaushal, SM Olhero, B Singh, DP Fagg, I Bdikin, JMF Ferreira,

Impedance analysis of 0.5Ba(Zr0.2Ti0.8)O-3-0.5(Ba0.7Ca0.3)TiO3 ceramics consolidated from micro-granules, Ceramics International 40,  10593-10600, 2014.

DOI: 10.1016/j.ceramint.2014.03.038

 

118.          G. Ray, N. Sinha, S. Bhandari, B. Singh, I. Bdikin, B. Kumar,

Flux growth of 0.94[Na0.5K0.5NbO3]-0.06LiNbO(3) piezo-/ferroelectric crystals for long duration and high temperature applications, 

Crystengcomm16, 7004-7012, 2014.

DOI: 10.1039/c4ce00819g.

 

119.          R Zamiri, B Singh, I Bdikin, A Rebelo, MS Belsley, JMF Ferreira,

Influence of Mg doping on dielectric and optical properties of ZnO nano-plates prepared by wet chemical method,

Solid State Communications 195,  74-79 (2014).

DOI: 10.1016/j.ssc.2014.07.011.

 

120.          R. Grigalaitis, Š. Bagdzevičius, J. Banys, E.E. Tornau, K. Bormanis, A. Sternberg, I. Bdikin and A.Kholkin,

LOCAL PIEZOELECTRICITY IN SrTiO3-BiTiO3 CERAMICSLOCAL PIEZOELECTRICITY IN SrTiO3-BiTiO3 CERAMICS,

Lithuanian Journal of Physics, Vol. 54, 170–176 (2014). EID: 2-s2.0-84908228789.

 

121.          Kanika Thukral, N. Vijayan, Budhendra Singh, Igor Bdikin, D. Haranath, K. K. Maurya, J. Philip, H. Soumya, P. Sreekanth and G. Bhagavannarayana,

Growth, structural and mechanical analysis of a single crystal of L-prolinium tartrate: a promising material for nonlinear optical applications, CrystEngComm, 2014,16, 9245-9254. DOI: 10.1039/c4ce01232a.

 

122.          Budhendra Singh, Igor Bdikin, Ajay Kaushal and Binay Kumar,

Flux growth and effect of cobalt doping on dielectric, conductivity and relaxation behaviour of 0.91Pb[Zn1/3Nb2/3]O-3-0.09PbTiO(3) crystals,

CRYSTENGCOMM, 16, 9135-9142 (2014).

DOI: 10.1039/c4ce01105h.

 

123.          T.Holz, D.Mata, N.F.Santos,  I.Bdikin, A.J.S.Fenandes, F.M.Costa,

Stiff Diamond/Buckypaper Carbon Hybrids,

ACS APPLIED MATERIALS & INTERFACES 6, 22649-22654 (2014). Impact 5.9.

DOI: 10.1021/am506573v.

 

124.          E.B.Araujo, E.C.Lima, I.K.Bdikin, A.L.Kholkin,

Physical properties of self-polarized PZT thin films at compositions around the morphotropic phase boundary.

Advanced Materials Research, 975, 2014, 9-15, 6th International Conference on Electroceramics, ICE 2013; Joao Pessoa; Brazil; 9 November 2013 through 13 November 2013. DOI: 10.4028/www.scientific.net/AMR.975.9.

 

125.          J. A. Santos, V. F. Neto, D. Ruch, J. Grácio,

Mechanical properties of nanocrystalline diamond coating on WC substrate with different interlayers,

Universal Journal of Mechanical Sciences and Technology, April 2, 2014, in press.

 

126.          J. Pinto, H. Varum, V.F. Neto, A. Paiva, P. Tavares, L. Fernandes, F. M. Nunes,

“Performance improvement of earth-based building materials by adding domestic sugar - an experimental testing campaign”,

NED University Journal of Research-Materials, XI, 3 (2014) 19-28.

 

127.          Nélia J. Alberto, Raul Simões, Rogério N. Nogueira, Victor F. Neto,

“Optimisation of tailored diamond coating conditions onto optical fibres through the Taguchi method”,

Diamond and Related Materials, 43 (2014) 60-65.

DOI: 10.1016/j.diamond.2014.01.014

 

128.          Aiping Zeng, Victor F. Neto, Jose J. Grácio, Qi Hua Fan,

“Diamond-like Carbon (DLC) Films as Electrochemical Electrodes”,

Diamond and Related Materials 43 (2014) 12-22.

DOI: 10.1016/j.diamond.2014.01.003.

 

129.          A.K. Mallik, J.C. Mendes, S.Z. Rotter, S. Bysakh,

Detonation Nanodiamond Seeding Technique for Nucleation Enhancement of CVD Diamond – Some Experimental Insights,

Advances in Ceramic Science and Engineering (ACSE) 3 (2014) 36-45

 

130.          A.K. Mallik, S. Bysakh, M. Sreemany, S. Roy, J. Ghosh, S. Roy, J.C. Mendes, J. Gracio, S. Datta, Property mapping of polycrystalline diamond coatings over large area,

Journal of Advanced Ceramics 3 (2014) 56-70,

DOI 10.1007/s40145-014-0093-1

 

131.          Electrical conductivity enhancement of nanodiamond–nickel (ND–Ni) nanocomposite based magnetic nanofluids, L. Syam Sundar, K. Shusmitha, Manoj K. Singh*, Antonio C.M. Sousa, International Communications in Heat and Mass Transfer 57 (2014) 1–7 (*corresponding author) http://www.sciencedirect.com/science/article/pii/S0735193314001602

 

 

132.          Heat Transfer Enhancement of Low Volume Concentration of CNT-Fe3O4/water Hybrid Nanofluids in a Tube with Twisted Tape Inserts under Turbulent Flow, Lingala Sundar, Antonio Sousa and Manoj Singh*, The American Society of Mechanical Engineers (ASME) (2014) doi:10.1115/1.402962 (http://thermalscienceapplication.asmedigitalcollection.asme.org/article.aspx?articleid=2099668)

 

133.          Enhanced Thermal Conductivity and Viscosity of Nanodiamond-Nickel Nanocomposite Nanofluids, L. Syam Sundar, Manoj K. Singh*, E. Venkata Ramana, Budhendra Singh, Jose ´ Grácio & Antonio C. M. Sousa, Scientific Reports 4, 4039 (2014) (Nature Publisher) DOI: 10.1038/srep04039

 

134.          Thermal conductivity and viscosity of stabilized ethylene glycol and water mixture Al2O3 nanofluids for heat transfer applications: An experimental study, L. Syam Sundar, E. Venkata Ramana, Manoj K. Singh*, Antonio C.M. Sousa, International Communications in Heat and Mass Transfer 56 (2014) 86–95; http://www.sciencedirect.com/science/article/pii/S0735193314001444

 

135.          Anjum N.A., Singh N., Singh M.K., Sayeed I., Duarte A.C., Pereira E., Ahmad I. (2014) Single-bilayer graphene oxide sheet impacts and underlying potential mechanisms assessment in germinating faba bean (Vicia faba L.). Science Of The Total Environment. 472, 834–841, Link: http://www.sciencedirect.com/science/article/pii/S0048969713012928

 

136.          2014 / Paulo J. Fernandes, Tânia Fontes, Sérgio R. Pereira, Margarida C. Coelho, Nagui M. Rouphail, Multi-Criteria Assessment of Crosswalk Location in Urban Roundabout Corridors, Transportation Research Record, in press (IF: 0.556).

137.          2014 / Paulo J. Fernandes, Tânia Fontes, Mark Neves, Sérgio R. Pereira, Jorge M. Bandeira, Margarida C. Coelho, Nagui M. Rouphail, Assessment of Corridors with Different Types of Intersections: An Environmental and Traffic Performance Analysis, Transportation Research Record, in press (IF: 0.556).

138.          2014 / Sérgio Pereira, Margarida C. Coelho, Can Nanomaterials be a Solution for Application on Alternative Vehicles? - A Review Paper on Life Cycle Assessment and Risk Analysis, International Journal of Hydrogen Energy, in press / http://www.sciencedirect.com/science/article/pii/S0360319915000129 (IF: 2.930)

139.          2014 / Paulo Fernandes, Jorge Bandeira, Tânia Fontes, Sérgio Pereira, Bastian J. Schroeder, Nagui M. Rouphail, Margarida C. Coelho, Traffic restriction policies in an urban avenue: A methodological overview for a trade-off analysis of traffic and emission impacts using microsimulation, International Journal of Sustainable Transportation, in press / http://www.tandfonline.com/doi/abs/10.1080/15568318.2014.885622#.VNjDCyyQiIQ (IF: 1.447)

140.          2014 / Jorge M. Bandeira, Dário O. Carvalho, Asad J. Khattak, Nagui M. Rouphail, Tânia Fontes, Paulo Fernandes, Sérgio R. Pereira & Margarida C. Coelho. Empirical assessment of route choice impact on emissions over different road types, traffic demands, and driving scenarios, International Journal of Sustainable Transportation, in press / http://www.tandfonline.com/doi/abs/10.1080/15568318.2014.901447#.VNjDuiyQiIQ   (IF: 1.447)

141.          2014 / Fontes, T., Pereira, S.R., Fernandes, P., Bandeira, J.M., Coelho, M.C., How to combine different microscopic microsimulation modelling tools to assess the environmental impacts of road traffic? Lessons and directions, Transportation Research Part D: Transport and Environment, Volume 34, January 2015, pp. 293–306 / http://www.sciencedirect.com/science/article/pii/S1361920914001758 (IF: 1.626)

142.          2014 / T. Fontes, S.R. Pereira, Impact assessment of road fleet transitions on emissions: The case study of a medium European size country, Energy Policy, Volume 72, September 2014, pp. 175–185 / http://www.sciencedirect.com/science/article/pii/S030142151400281X (IF: 2.696)

143.          2014 / Fontes, T., Lemos, A., Fernandes P. , Pereira, S.R., Bandeira, J.M., Coelho, M.C. Emissions impact of road traffic incidents using Advanced Traveller Information Systems in a regional scale. Transportation Research Procedia 3 (2014), pp. 41-50 / http://www.sciencedirect.com/science/article/pii/S235214651400252X

144.          2014 / Bandeira J. M., Fontes, T., Pereira, S.R., Fernandes, P.,  Khattak, A. J., Coelho, M.C. Assessing the importance of vehicle type for the implementation of eco-routing systems. Transportation Research Procedia 3 (2014), pp. 800-809 / http://www.sciencedirect.com/science/article/pii/S2352146514002269

145.          2014 / Sérgio Ramos Pereira, Tânia Fontes, Margarida C. Coelho, Can Hydrogen or Natural Gas Be Alternatives for Aviation? – A Life Cycle Assessment, International Journal of Hydrogen Energy 39 (2014), pp. 13266-13275 / http://www.sciencedirect.com/science/article/pii/S0360319914018898 (IF: 2.930)

146.          2014 / Luís Vasconcelos, Ana Bastos Silva, Álvaro Seco, Paulo J. Fernandes, Margarida C. Coelho, Turboroundabouts: Multicriterion Assessment of Intersection Capacity, Safety, and Emissions, Transportation Research Record: Journal of the Transportation Research Board 2402, p. 28-37. / http://trb.metapress.com/content/9113n1kp1vt2331x/?p=bb80321815f94e8ca1b47678820c99e8&pi=3 (IF: 0.556).

147.          2014          Guilhermina Torrão, Margarida C. Coelho & Nagui M. Rouphail, Modeling the Impact of Subject and Opponent Vehicle on Crash Severity, in Two-Vehicle Collisions, Transportation Research Record: Journal of the Transportation Research Board, No. 2432, Washington D.C., pp. 53-64. / http://trb.metapress.com/content/v12n6485830324h6/?p=559c43bdedbc445cac86cfc84ca16e78&pi=6 (IF: 0.556).

148.          2014 / Tânia Fontes, Paulo Fernandes, Hugo Rodrigues, Jorge Bandeira, Sérgio Ramos Pereira, Asad J. Khattak & Margarida C. Coelho, Are HOV/eco-lanes a sustainable option to reducing emissions in a medium-sized European city?, Journal of Transportation Research A: Policy and Practice, Volume 63, May 2014, pp. 93–106 / http://www.sciencedirect.com/science/article/pii/S0965856414000597 (IF: 2.525)

149.          2014 / Katayoun Salamati, Margarida C. Coelho, Paulo J. Fernandes, Nagui M. Rouphail, H.C. Frey & Jorge Bandeira, Emission Estimation at Multilane Roundabouts: Effect of Movement and Approach Lane, Transportation Research Record, No. 2389, Transportation Research Board of the National Academies, Washington, D.C., pp. 12–21 / http://trb.metapress.com/content/l7k711l578347244 (IF: 0.556)

150.          2014 / Fontes, T., Silva L., Silva, M.P., Barros, N., Carvalho, A.C. Can artificial neural networks be used to predict the origin of ozone episodes? Science of Total Environment, Volumes 488-489, pp. 197-207,  http://www.sciencedirect.com/science/article/pii/S0048969714005877 (IF: 3.163)

151.          2014 / Margarida C. Coelho, Tânia Fontes, Jorge M. Bandeira, Sérgio R. Pereira, Oxana Tchepel, Daniela Dias, Elisa Sá, Jorge H. Amorim, Carlos Borrego. Assessment of potential improvements on regional air quality modelling related with implementation of a detailed methodology for traffic emission estimation, Science of the Total Environment, Volumes 470–471, February 2014, pp. 127–137 / http://www.sciencedirect.com/science/article/pii/S0048969713010802 (IF: 3.163)

 

 

National Scientific Papers

 

1.                  Duarte, R.; Ramos, A., 2014, ESTUDO COMPARATIVO DA DISTRIBUIÇÃO DE CARGA ARTICULAÇÃO ANCA INTACTA E COM PRÓTESE TOTAL PRESS-FIT E RESURFACING, Revista Portuguesa de Ortopedia e Traumatologia, Volume 22, Fascículo II, p5 a p18.

2.                   F. Q. Melo, M. Vaz, P. Rebelo, R.A.S. Moreira Vibração de uma viga elástica com grandes amplitudes, #176 9º Congresso Nacional de Mecânica Experimental, CNME2014, Aveiro, 15-17 Out, 2014 (Congresso)

 

 

 

 

International Scientific Presentations

 

1.                  2014 / D. Ramasamy, A.L. Shaula, V.V. Kharton, A.G. Herrero, D.P. Fagg. The Effect of Cobalt Oxide Sintering aid in Ce0.8Tb0.2O2-d Mixed Ionic Electronic Conductor 5th International conference on Advanced Nanomaterials (Aveiro, Portugal, 2-4 July 2014) https://www.dropbox.com/s/eo5rhyl1wg5bgds/ANM2014_AbstractBook.pdf

2.                  2014 / A. Shaula, J. Abrantes, J. Frade and D. Fagg. Complex impedance study of Sr1-yTi1-xFexO3-d materials with low iron content. 5th International conference on Advanced Nanomaterials (Aveiro, Portugal, 2-4 July 2014) / Comunicação em encontro científico internacional / https://www.dropbox.com/s/eo5rhyl1wg5bgds/ANM2014_AbstractBook.pdf

3.                  Juan Liao, Xin Xue, Frederic Barlat, Jose Gracio, Material Modelling and Springback Analysis for Multi-stage Rotary Draw Bending of Thin-walled Tube Using Homogeneous Anisotropic Hardening Model, Procedia Engineering, Volume 81, 2014, Pages 1228–1233, 11th International Conference on Technology of Plasticity, ICTP 2014, 19-24 October 2014, Nagoya Congress Center, Nagoya, Japan.

4.                  X. Xue, J. Liao, G. Vincze, J. J. Gracio. Optimization of an asymmetric thin-walled tube in rotary draw bending process. The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET 2014), Melbourne, Australia. January 6-10, 2014.

5.                  M.C. Butuc, G. Vincze, F. Barlat and J.J. Grácio, Plastic Instability in Complex Strain Paths predicted by the Homogeneous Yield Function-based Anisotropic Hardening Model, Numisheet 2014, Melbourne, Australia, 6-10 January.

6.                  M.C. Butuc, G. Vincze, F. Barlat and J.J. Grácio, Plastic instability of FCC metals predicted by advanced constitutive equations, IDDRG 2014, Paris, France, 1-5 June.

7.                  Xin Xue , Juan Liao, Gabriela Vincze, Jose Grácio, Twist springback of an asymmetric thin-walled tube in mandrel rotary draw bending process, 11th International Conference on Technology of Plasticity, ICTP 2014, 19-24 October 2014, Nagoya Congress Center, Nagoya, Japan.

8.                  Majidi, O., Lee, M.G., Barlat, F., 2014. U-draw bending of DP780 in non-conventional drawing mode using a direct-drive digital servo-press. Procedia Engineering 81, 987–992. doi:10.1016/j.proeng.2014.10.129

9.                  Chung, Y., Ahn, D., Barlat, F., Lee, M.G., 2014. Prediction of ridging by 3-dimensional texture in ferritic stainless steels. Key Engineering Materials 622-623, 72-76. doi:10.4028/www.scientific.net/KEM.622-623.72

10.              Dallinger, F., Roux, E., Hora, P., Barlat, F., van den Boogaard, A.H., 2014. Strain path dependent evolution of yield locus based on HAH model description. Proc. IDDRG 2014 Conference: Innovations for the sheet metal industry, Paris, France, June 1-4, 2014, CETIM, pp. 163-168.

11.              Aretz, H., Barlat, F., 2014. Influence of contact friction on the experimental determination of the balanced biaxial strain-ratio using the disc compression test. Key Engineering Materials 611-612, 529-535. doi:10.4028/www.scientific.net/KEM.611-612.529

12.              Nguyen, N.T., Charkraborti, N., Lee, M.G., Barlat, F., 2014. Evolutionary optimization to determine optimal conditions of variable blank holding force for springback reduction in AHSS-mild steel TWBs. Numisheet 2014, Melbourne, Australia, January 6-10, 2014. AIP Conf. Proc. 1567, 780-783. doi:10.1063/1.4850086

13.              Panich, S., Barlat, F., Uthaisangsuk, V., Suranuntchai, S., Jirathearanat, S., 2014. Forming limit curves and forming limit stress curves for advanced high strength steels. Materials Science Forum 773-774, 109-114.

14.              Kim, J.H., Barlat, F., Pierron, F., 2014. Parameter determination of anisotropic yield criterion. In: Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume 8, Conference Proceedings of the Society for Experimental Mechanics Series 2014, pp. 253-257.

15.              Cardoso, R. P. and Cesar de Sa, J. (2014), Locking and its treatment for nonlinear isogeometric analysis. In: The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, NUMISHEET2014, Melbourne, Australia, 6 -10 January 2014.

16.              Dick, R. E., Cardoso, R. P., Paulino, M. and Yoon, J. (2014), Benchmark 4: Wrinkling during cup drawing. In: The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, NUMISHEET2014, Melbourne, Australia, 6 - 10 January 2014.

17.              Wen, W., Borodachenkova, M., Bastos, A., Barlat, F., Grácio, J. J. Hardening behavior and texture evolution of TWIP steel during strain path change, Proceeding ICOTOM 17, Dresden, Germany 2014.

18.              Bandeiras C., Completo A., Ramos A., 2014. “Compression, shear and bending on tissue-engineered cartilage: a numerical study”. 39ème Congrès de la Société de Biomécanique – Valenciennes, France, 27-29 August. EBook.

 

19.              Bandeiras, C., Completo, A., Ramos, A., Rufino, T., Ribeiro, M., Ferreira, J.P., Mendes, A. 2014. “A model for tissue engineered cartilage in unconfined compression: simulation and validation study”. ANM 2014 - International Conference on Advanced Nano Materials, Aveiro, Portugal, 2-4 July. Ebook.

 

20.              Rufino, T., Ribeiro, M., Ferreira, J.P., Bandeiras, C., Completo, A., Ramos, A., Mendes, A. 2014. “Mechanical stimulation increases the metabolic activity of chondrocytes in 3D agarose constructs”. ANM 2014 - International Conference on Advanced Nano Materials, Aveiro, Portugal, 2-4 July. Ebook.

 

21.              Bandeiras, C., Completo, A., Ramos A., 2014. “Simulation of remodeling of tissue engineered condylar cartilage under static hydrostatic pressure” III International Conference on Biondental Engineering, Porto, Portugal, 22-23 June.

 

22.              Bandeiras, C., Completo, A., Ramos A., 2014. “Impact of strain and frequency on the remodeling of composition and mechanical properties of tissue engineered cartilage”. 12th International Symposium Computer Methods in Biomechanics and Biomedical Engineering 2014, Amsterdam, The Netherlands, 13-15 October. Ebook.

23.              Cortez, S., Bandeiras, C., Completo, A., Alves, J.L. 2014. “The influence of collagen fibre orientation on permeability and solute transport of articular cartilage”. 12th International Symposium Computer Methods in Biomechanics and Biomedical Engineering 2014, Amsterdam, The Netherlands, 13-15 October. Ebook.

 

24.              Bandeiras, C., Completo, A., Ramos A., 2014.”Scaffold geometry influences the mechanical properties of tissue engineered cartilage”. 11th World Congress on Computational Mechanics, 5th European Conference on Computational Mechanics, 6th European Conference on Computational Fluid Dynamics., Barcelona, Spain, July 20 - 25, 2014. Ebook 214.

 

25.              Bandeiras, C., Completo, A., Ramos A., 2014. “Temporal distribution of unconfined compression stimuli and mechanical properties remodeling on tissue engineered cartilage”. 7th World Congress of Biomechanics, Boston, USA, 6-11 July. Ebook.

 

26.              Mesnard M. & Ramos A., Design of a Temporomandibular Joint Prosthesis - From the Biomechanical Characterization to the 1st Prototype / 22nd Congress of the European Association for Cranio-Maxillo-Facial Surgery / 09-2014 - Prague, Rép. Tchèque.

27.              Mesnard M., Ramos A., BALLU A. & PERRY N., Managing the Variability of Biomechanical Characteristics before the Preliminary Design Stage of a Medical Device / CIRP - International Academy for Production Engineering - 64th General Assembly / 08-2014 - Nantes, France.

28.              Mesnard M. & Ramos A., Biomechanical analysis and development of design criteria of a joint prosthesis / Innovation in Product Design and Manufacture - Virtual Concept Workshop / 03-2014 - Medellin, Colombia.

29.              M. Soares dos Santos, J. A. F. Ferreira, D. R. Fernandes, A. Ramos, J. A. O. Simões, AN ELECTRICAL POWER SUPPLY SYSTEM FOR INSTRUMENTED HIP JOINT PROSTHESES, 7th World Congress of Biomechanics, July 6-11, 2014, Boston, MA, USA.

30.              M. Bola, A. Ramos, J. A. Simões, Numerical Characterization of Shoulder Muscle Actions, 7th World Congress of Biomechanics, July 6-11, 2014, Boston, MA, USA.

31.              A. Ramos, M. Mesnard, NUMERICAL STUDY OF THE INFLUENCE OF MOUTH APERTURE IN FOSSA COMPONENT OF TMJ REPLACEMENT, 7th World Congress of Biomechanics, July 6-11, 2014, Boston, MA, USA.

32.              M. Mesnard, A. Ramos, How to manage the variations of biomechanical characteristics when modelling a human joint, 7th World Congress of Biomechanics, July 6-11, 2014, Boston, MA, USA.

33.              Sónia Lucena, Teresa Oliveira, José Potes, Cristina Queiroga, Sarrawat Rehman, António Ramos, Chiara Vitale-Brovarone, Salvatore Borris, Joana Reis, Kenny Dalgarno Development of a sheep vertebroplasty model for bioceramic materials assessment,  E-MRS 2014 SPRING MEETING, Technical sessions: May 26-30, Congress Center - Lille, France

34.              Ramos A, Mesnard M., Models to predict implanted Temporomandibular Joint behavior - Experimental and Numerical Tools, TMJ 2014, Bioengineering conference, 19-21 June, Pittsburg, USA

35.              Miguel, J., Completo, A., Ramos, A., 2014. “A biomechanical analysis of the distal bones in the radiocarpal arthroplasty under a physiological load condition”. 7th World Congress of Biomechanics, Boston, USA, 6-11 July. Ebook

 

36.              Fonseca, F., Completo, A., 2014. “Biomechanical properties of fixation methods” 16th ESSKA-European Society for Sports Traumatology, Knee Surgery and Arthroscopy Congress, 14-17 May 2014, Amsterdam. Ebook.

37.              Valente RAF, Caseiro JF, “On the use of Isogeometric Analysis in the development of locking free NURBS-based formulations for nonlinear structural applications”, 1st International Workshop on Software Solutions for Integrated Computational Materials Engineering, 24-27 Junho, Aachen, Alemanha, 2014 (apresentação por convite)

 

38.              Lamas, B; Abreu, B;  Fonseca, A;  Martins, N; Oliveira, MAS; “Breaching CNT nanofluids termal conductivity modelling uncertainties” THERMAM 2014 - Thermophysical and Mechanical Properties of Advanced Materials, 3rd Rostocker Symposium on Thermophysical Properties for Technical Thermodynamics, 12-15 June 2014, IZMIR, Turquia

 

39.              P. Vasconcelos, A. Gießmann, J.A Oliveira, A. Andrade-Campos, Heat treatments analysis of steel using coupled phase field and finite element methods; Actas electrónicas do ESAFORM 2014 – 17th Conference of the European Scientific Association on Material Forming, 7 a 9 de Maio, Espoo, Finlândia, 2014.

 

40.             Caseiro JF, “On the Assumed Natural Strain Method for isogeometric analysis: NURBS-based solid-shell element for the analysis of thin-shell structures”, 10 Março, Universidade de Pavia, Itália, 2014 (seminário por convite)

 

41.               J. F. Caseiro, R. A. F. Valente, A. Reali, J. Kiendl, F. Auricchio e R. J. Alves de Sousa, Extending the Assumed Natural Strain Method to Isogeometric Analysis: A new NURBS-Based solid-shell element, Isogeometric Analysis 2014, Austin, Texas, Estados Unidos da América, 8-10 Janeiro, 2014

 

42.              B. Coelho, A. Andrade-Campos, On the comparison of distinct numerical methodologies for energy costs minimisation in WSSs using variable-speed pumps, Proceedings of the IWA World Water Congress & Exhibition, Lisbon (21-26 September), 2014

 

43.              J. I. V. de Sena, L. Duchene, A. M. Habraken, Valente, R. J. Alves de Sousa, R. A., Numerical Simulation of a Conical Shape Made by Single Point Incremental Forming Adaptive Remeshing technique with solid-shell Elements, Proceedings of Esaform 2014, May 7 - 9, Espoo – Finland.

 

44.             J. I. V. de Sena, C.F. Guzman, L. Duchene, A. M. Habraken, Valente, R. J. Alves de Sousa, R. A., (2014) “Numerical simulation of a conical shape made by single point incremental forming”, In J.-W. Yoon, T. B. Stoughton, B. Rolfe, J. H. Beynon, and P. Hodgson, editors, AIP Conference Proceedings, Melbourne, Australia, pp. 852-855. DOI: 10.1063/1.4850104

 

45.              J. Caseiro, R. Valente, A. Reali, J. Kiendl, F. Auriccho, R. Alves de Sousa, Extending the Assumed Natural Strain Method to Isogeometric Analysis: A New NURBS-Based Solid-Shell Element, in IGA 2014, Integrating Design and Analysis, January 8-10, 2014, Austin, Texas.

 

46.             B. Coelho, A. Andrade-Campos, The operational cost minimisation in water supply systems using cascade optimisation techniques, Proceedings of the 20th conference of the International federation of Operational research societies (IFORS2014), Barcelona (13-18 July), 2014

 

47.              Isabel Duarte. Aluminium alloy foams: Production, Properties and Applications. Invited Lecture (90 min). Invited expert Researcher in the framework of the project entitled “Centre for Open Innovation and Research of University of Maribor”. Faculty of Mechanical Engineering. University of Maribor. 9th December 2014. Slovenia. Chairperson: Zoran Ren

 

48.             Isabel Duarte, Matej Vesenjak, Lovre Krstulović-Opara. Static and dynamic crush performance of foam filled structures made of aluminium alloys. CellMat 2014. A6-Plastic Deformation and in-Situ Mechanical Characterisation. CD of proceedings. Editors: O. Andersen & M. Scheffler.Cellular Materials. 22-24 October. Dresden. Germany

 

49.             João Torrão, Jorge Ferreira and Ricardo Alves de Sousa (2014). Control and Execution of Incremental Forming using a Stewart Platform. CONTROLO’2014 – Proceedings of the 11th Portuguese Conference on Automatic Control, Lecture Notes in Electrical Engineering, Volume 321, pp 293-302.

 

50.              J.B Sá de Farias, R.N. Bastos, J.A.F. Ferreira and R.J.Alves de Sousa. “Assessing 3 and 5 degrees of freedom toolpath strategy influence on single point incremental”. In Proceedings of  Metal Forming (2014), Palermo (Italy), September 21-24, 2014

 

51.              E-MRS 2014 SPRING MEETING, Technical sessions: May 26-30, Congress Center - Lille, France. Pedro Sá, José Barbosa, Igor Bdikin, Bernardo Almeida, Anabela G. Rolo, Andrei Kholkin, Dmitry Isakov, Ferroelectric properties of Barium Titanate nanofibers. (poster).

 

52.              SAF/IWATMD/PFM, University Park, PA, USA, May 12-16, 2014.

A.V. Bystrova, Yu.D. Dekhtyar, A.I. Popov, I. Bdikin, A. Kholkin, and V.S. Bystrov, Modified Hydroxyapatite Structure and Properties. (poster). ANM2014, 5th International conference on Advanced Nanomaterials, 2-4 July,2014 | Aveiro – Portugal

 

53.              E. Seyedhosseini, I. Bdikin, P. Zelenovskiy, S. Vasiliev, D. Petukhova, А. Turygin, V.Ya. Shur, D. Isakov, and A.L. Kholkin, Domain Structures and Polarization Reversal in β-glycine Crystals. (oral). ANM2014, 5th International conference on Advanced Nanomaterials, 2-4 July,2014 | Aveiro – Portugal

 

54.              Igor Bdikin, Budhendra Singh, Suresh Kumar Jakka, M.P.F.Graca, A.M.Balbashov, J.Gracio, A.L.Kholkin, Nanoindentation induced polar properties in piezoelectric materials. (oral). ANM2014, 5th International conference on Advanced Nanomaterials, 2-4 July,2014 | Aveiro – Portugal

 

55.              Ensieh Hosseini, Igor Bdikin, Vladimir Bystrov, Andrei L. Kholkin, Piezo and Ferroelectric Properties of Glycine Nanocrystals. (poster). ANM2014, 5th International conference on Advanced Nanomaterials, 2-4 July,2014 | Aveiro – Portugal

 

56.              Anna V. Bystrova, Yu. D. Dekhtyar, J. Coutinho, A. I. Popov, I. Bdikin, M.E.Costa, A. Kholkin,V.S. Bystrov, Modified Hydroxyapatite with structural defects and its properties. (poster). ANM2014, 5th International conference on Advanced Nanomaterials, 2-4 July,2014 | Aveiro – Portugal

 

57.              Alejandro Heredia, Budhendra Singh, Igor Bdikin, Mutual Effects of Glycine and Diphenylalanine Tubes in Ferroelectric Composites. (poster). ANM2014, 5th International conference on Advanced Nanomaterials, 2-4 July,2014 | Aveiro – Portugal

 

58.              Svitlana Kopyl, Igor Bdikin and António C.M. Sousa, Magnetic Carbon Nanotubes: Synthesis, Characterization and Properties. (poster). ANM2014, 5th International conference on Advanced Nanomaterials, 2-4 July,2014 | Aveiro – Portugal

 

59.              Reza Zamiri, Avito Rebeloa, Budhendra Singh, Ajay Kaushal, Igor Bdikin, M.F. Ferreira, Enhanced local piezoelectric response in the Erbium-doped ZnO nanostructures prepared by wet chemical synthesis. (poster). ANM2014, 5th International conference on Advanced Nanomaterials, 2-4 July,2014 | Aveiro – Portugal

 

60.              Budhendra Singh, Igor Bdikin, Ajay Kaushal, J. Suresh Kumar, Enhanced redshift of the optical band gap in Ni-doped ZnO nanoparticle synthesized by sonochemical method. (poster). ANM2014, 5th International conference on Advanced Nanomaterials, 2-4 July,2014 | Aveiro – Portugal

 

61.              M.C.Matesanz, M.Vila, M.J.Feito, J.Linares, M.Vallet-Regí, G.Gonçalves, P.A.A.P.Marques, M.T.Portolés. Cell responses to graphene oxide nanosheets. Facultad de Biología de la UCM la Semana Nacional de la Biotecnología, October 2014, Madrid, SP. (1st prize of posters)

 

62.              M Silibin, N Nasani, Al Solnyshkin, G Goncalves, PAAP Marques, J Gracio, B Singh, I Bdikin. Local ferroelectric properties of composite P(VDF-TrFE)-Graphene films. 5th International Conference on Advanced Nanomaterials, 2-4 July 2014, Aveiro, PT

 

63.              Nuno A. F. Almeida, J. Rodrigues, Patrícia Silva, M. J. Soares, T. Monteiro, José Lopes da Silva, P.A.A.P. Marques. Hydrothermal synthesized TiO2:Eu and TiO2:Eu-Graphene Oxide composites for atmosphere luminescent probes. 5th International Conference on Advanced Nanomaterials, 2-4 July 2014, Aveiro, PT

 

64.              Cláudia Amaral, Susana Pinto, PAAP Marques, Romeu Vicente. Effects of carbon nanotubes on energy storage properties of phase change material: Approach to experimental optimization. 5th International Conference on Advanced Nanomaterials, 2-4 July 2014, Aveiro, PT

 

65.              G Gonçalves, PAAP Marques, M Vila. Graphene Oxide: An emerging nanomaterial for cancer therapy. Graphene Week 2014 conference, Chalmers Conference Center, Gothenburg, SE, 23-27 June 2014.

 

66.              Barbara Gabriel, V.F. Neto, “Polymeric flow in microcavities coated with nanocrystalline diamond”, ICPB6 - 6th International Conference on Polymer Behaviour, 22 - 26 September 2014, University of Vienna, Austria (ORAL)

 

67.              Cátia S. C. Santos, J.C. Vasco, A.J. Pontes, A. S. Pouzada, M.S.A. Oliveira, V.F. Neto, “Assessment of polymeric flow in microcavities coated with nanocrystalline diamond”, PMI 2014 - 6nd International Conference on Polymers & Moulds Innovations, 10 - 12 September 2014, University of Minho, Guimarães, Portugal  (ORAL)

 

68.              N. Alberto, R. Nogueira, V. Neto, “Use of fibre Bragg grating sensors for the thermal assessment of the thermoplastic injection moulding process”, PMI 2014 - 6nd International Conference on Polymers & Moulds Innovations, 10 - 12 September 2014, University of Minho, Guimarães, Portugal  (ORAL)

 

69.              Li Qin Zhou, Raul Simões, Qi Hua Fan, Victor Neto, “Sputtered ZnO thin films from novel conductive ZnO:Zn composites”, EVC 2014 – European Vacuum Conference, 8 - 12 September 2014, University of Aveiro, Portugal (ORAL)

 

70.              Cátia S. C. Santos, Barbara Gabriel, V.F. Neto, “Vacuum assisted synthesis of nanomaterials: A review”, EVC 2014 – European Vacuum Conference, 8 - 12 September 2014, University of Aveiro, Portugal (ORAL)

 

71.              Debarati Mukherjee, Luis Rino, Joana Catarina Mendes, Victor F. Neto, “A preliminary study of diamond coatings on commercial titanium dental”, EVC 2014 – European Vacuum Conference, 8 - 12 September 2014, University of Aveiro, Portugal (ORAL)

72.              Raul Simões, V. F. Neto, "Transparency of different diamond films prepared by different techniques ", Diamond 2014 - International Conference on Diamond and Carbon Materials, 7-11 September 2014, Madrid, Spain (POSTER)

 

73.              Barbara Gabriel, Victor Neto, “Research Centres and Industry as stakeholders for innovation using nanotechnology. A social change”, 11th International Conference on Hands-on Science - HSCI2014, 21-25 July 2014, Aveiro, Portugal (ORAL)

 

74.              R. K. Gupta,  J. Hong, M. Dubey, X. Wang, N. Mandel, V. Neto*, J. Gracio, Z. Gu, Q. Fan, "Biochar Nanomaterials Activated by Oxygen Plasma for Energy Storage", 5th International Conference on Advanced Nanomaterials - ANM2014, 2 - 4 July 2014, University of Aveiro, Portugal (POSTER)

 

75.              Cátia S. C. Santos, V.F. Neto, "Nanostructured Coatings in Micromoulding Injection – A Case Study", 5th International Conference on Advanced Nanomaterials - ANM2014, 2 - 4 July 2014, University of Aveiro, Portugal (POSTER)

 

76.              Cátia S. C. Santos, Barbara Gabriel, V.F. Neto, "Industrial Applications of Nanoparticles - A Prospective Overview", 5th International Conference on Advanced Nanomaterials - ANM2014, 2 - 4 July 2014, University of Aveiro, Portugal (ORAL)

 

77.              Raul  Simões, V.F. Neto, “Nanodiamond Coated Glass as a Protective Layer in Solar Cells”, 5th International Conference on Advanced Nanomaterials - ANM2014, 2 - 4 July 2014, University of Aveiro, Portugal (POSTER)

 

78.              Nélia Alberto, César Vigário, Nuno Almeida, Gil Gonçalves, João L. Pinto, Paula Marques, Rogério Nogueira,  Victor Neto, “Characterization of Graphene Oxide Coatings onto Optical Fibers for Sensing Applications”, 5th International Conference on Advanced Nanomaterials - ANM2014, 2 - 4 July 2014, University of Aveiro, Portugal (POSTER)

 

79.              Nélia Alberto, Rogério Nogueira, Victor Neto, “Thermal Monitoring of the Thermoplastic Injection Molding Process with FBGs”, AOP2014, 26 - 30 May 2014, Aveiro, Portugal (POSTER)

 

80.              Nélia J. Alberto, Hypolito J. Kalinowski, Victor F. Neto, Rogério N. Nogueira, “Regeneration of FBGs during the HFCVD diamond-fiber coating process”, AOP2014, 26 - 30 May 2014, Aveiro, Portugal (POSTER)

 

81.              D. Mukherjee, J. Gracio, J.C. Mendes, Selective nano-diamond deposition using soft lithography, ANM 2014 – 5th International Conference on Advanced Nano Materials, Aveiro, Portugal, 2-4 July 2014, P308

 

82.              2014 / Margarida C. Coelho, Predicting Trade-offs between Road Safety, Energy Efficiency and Emissions, AHFE 2014 – 5th International Conference on Applied Human Factors and Ergonomics, Cracow, July 2014 / http://transportes-tema.web.ua.pt/Publications.aspx.

83.              2014 / Margarida C. Coelho, Speed control radars – Influence of the human factor in the impact on road traffic behavior and pollutant emissions, AHFE 2014 – 5th International Conference on Applied Human Factors and Ergonomics, Cracow, July 2014 / http://transportes-tema.web.ua.pt/Publications.aspx.

84.              2014 / Fontes, T., Lemos, A., Fernandes P. , Pereira, S.R., Bandeira, J.M., Coelho, M.C. Emissions impact of road traffic incidents using Advanced Traveller Information Systems in a regional scale. 17th Euro Working Group on Transportation (EWGT 2014), Sevilla, July 2014 / http://transportes-tema.web.ua.pt/Publications.aspx.

85.              2014 / Bandeira J. M., Fontes, T., Pereira, S.R., Fernandes, P.,  Khattak, A. J., Coelho, M.C. Assessing the importance of vehicle type for the implementation of eco-routing systems. 17th Euro Working Group on Transportation (EWGT 2014), Sevilla, July 2014 / http://transportes-tema.web.ua.pt/Publications.aspx.

86.              2014 / T. Fontes, J.M. Bandeira, S.R. Pereira, P. Fernandes, M.C. Coelho, Urban road transportation planning: the trade-off between noise and atmospheric emissions, 2014 Transportation Land Use and Air Quality Conference, Charlotte, March 2014 / http://transportes-tema.web.ua.pt/Publications.aspx.

87.              2014 / Daniela Dias, Jorge H. Amorim, Carlos Borrego, Tânia Fontes, Paulo Fernandes, Sérgio R. Pereira, Jorge M. Bandeira, Margarida C. Coelho, Oxana Tchepel. Impact of Road Transport on Urban Air Quality: GIS and GPS as a Support for a Modelling Framework, GIS Ostrava 2014 – Geoinformatics for Intelligent Transportation, Ostrava, January 2014 / http://transportes-tema.web.ua.pt/Publications.aspx.

88.              2014 / Luís Vasconcelos, Ana Bastos Silva, Álvaro Seco, Paulo J. Fernandes, Margarida C. Coelho, Turboroundabouts: A Multi-criteria Assessment on Intersection Capacity, Safety and Emissions, 93rd Transportation Research Board Annual Meeting, Washington D.C., January 2014 / http://transportes-tema.web.ua.pt/Publications.aspx.

89.              2014 / Tânia Fontes, Sérgio Ramos Pereira, Jorge Bandeira & Margarida C. Coelho, Fuel & Toll Pricing: Assessment of the Effectiveness in Emissions Control, 93rd Transportation Research Board Annual Meeting, Washington D.C., January 2014 / http://transportes-tema.web.ua.pt/Publications.aspx.

90.              2014 / Guilhermina Torrão, Margarida C. Coelho & Nagui M. Rouphail, Modeling the Impact of Subject and Opponent Vehicle on Crash Severity, in Two-Vehicle Collisions, 93rd Transportation Research Board Annual Meeting, Washington D.C., January 2014 / http://transportes-tema.web.ua.pt/Publications.aspx.

 

National Scientific Presentations

 

 

1.                  Effect of Moisture Content on Curing Kinetics of Agglomerate Cork. L. Moreira, V. A. F. Costa, F. Neto da Silva. Jornadas científicas da cortiça e suas aplicações, Fundação Cupertino Miranda, Porto, Portugal, 24 de Outubro de 2014.

 

2.                  Medição das Propriedades Mecânicas de Aglomerado de Cortiça usando um Pêndulo Composto. Francisco Q. de Melo, Carla M. V. Lopes e Fernando Neto da Silva Jornadas científicas da cortiça e suas aplicações, Fundação Cupertino Miranda, Porto, Portugal, 24 de Outubro de 2014.

 

3.                  Sousa, J. A., Pereira, A. B., Morais, A. B. Estudo da delaminagem sob fadiga em modo II de laminados carbono/epóxido. 9º Congresso Nacional de Mecânica Experimental, Universidade de Aveiro, 15-17 outubro 2014.

4.                  Castro, A., Flores, P., Completo, A., Alves, J., 2013. The role of poroelasticity on the biomechanics of the intervertebral disc: A finite element study. 5º Congresso Nacional de Biomecânica, IDMEC, Espinho, 8 a 9 de fevereiro, Livro de atas pp. 7-8 (ISBN978-989-96276-3-5)

 

5.                  Bandeiras, C., Completo, A., Ramos, A., Rufino, T., Ribeiro, M., Ferreira, J.P., Mendes, A. 2014. “Previsão do comportamento de tecidos cartilagíneos em biorreator em resposta a estímulos mecânicos”. 9º Congresso Nacional de Mecânica Experimental, Aveiro, 15-17 de Out. Ebook 100-108.

 

6.                  Chan, A., Completo, A., Gamelas, J., Folgado, J., Fernandes, P. 2014. “Biomechanical analysis of metaphyseal sleeves used for large tibial bone defects”. 9º Congresso Nacional de Mecânica Experimental, Aveiro, 15-17 de Out. Ebook 102.

7.                  J.A. Dias-de-Oliveira; Utilização da impressão 3D no Ensino – conteúdos educativos; Conferência BEEINSCHOOL – 3D printing for better Education, Lisboa Design Show, 9 de Outubro, FIL, Lisboa, Portugal, 2014

 

8.                  Isabel Duarte. Caso de estudo: Espumas de alumínio e suas aplicações. Workshop: "Alumínio, um material com futuro"e Engenheiros da Região Sul. Organizado pelo Conselho Regional Sul do Colégio de Engenharia de Materiais  e a Associação Portuguesa do Alumínio. Auditório da Ordem dos Engenheiros. Lisboa. 21 de março 2014, Lisboa, Portugal. Palestra Convidada. http://www.ordemengenheiros.pt/fotos/dossier_artigo/espumasdealuminio_isabelduarte_1820245559533541a1354bb.pdf

 

9.                  Isabel Duarte. PalestraUma viagem ao Mundo das Espumas” apresentada na: (i) Edição de 2014 da Academia de Verão. Público-alvo: alunos do 10º, 11º e 12º anos; 11 de Julho de 2014; (ii) Semana Aberta da Ciência e Tecnologia 2014 (24 - 28 de Novembro 2014). 27 de Novembro de 2014. (iii) Colaboração Campus Júnior. Dia das Competições Nacionais de Ciência. 28 de Abril 2014.

 

10.               Isabel Duarte. Materiais Celulares” no âmbito das disciplinas: (i)Tecnologias Avançadas da Produção. Aula: 16 de Dezembro de 2014. Responsável da disciplina: Victor Neto. (ii) Disciplina do 5º ano “Estruturas Compósitas e Celulares”. Aulas: 3-12-2013 e 10-12-2013. Responsável da disciplina: Alfredo Morais.

 

11.              B. Coelho, A. Andrade-Campos, On the comparison of numerical methodologies for control optimisation of variable-speed pumps, Poster presentation in the IWA World Water Congress & Exhibition, Lisbon (21-26 September), 2014.

 

12.              B. Coelho, A. Andrade-Campos, Improving water supply systems efficiency using optimisation techniques, Poster presentation in the Research Day 2014, University of Aveiro, Portugal, 19th June, 2014.

 

13.              Victor Neto, “Current and potential aplications of nanoengenering in polymers”, XXX Plastics Seminar of the Portuguese Association of Plastic Industry, 24 - 25 October 2014, Grande Hotel do Luso, Luso, Portugal (INVITED TALK)

 

14.              N. Alberto, R. Nogueira, V. Neto, “Thermal monitoring of the plastic injection molding process with optical fiber Bragg gratings”, CNME 2014 - Experimental Mechanics National Congress, 15 - 17 October 2014, University of Aveiro, Portugal (ORAL)

 

15.              C.S. Santos, M.S.A Oliveira, T. Zhiltsova, V.F. Neto, “Influence of nanodiamond coatings in the polymeric flow in microinjection”, CNME 2014 - Experimental Mechanics National Congress, 15 - 17 October 2014, University of Aveiro, Portugal (ORAL)

 

16.              Raul Simões; V.F. Neto, “Application of nanocrystalline diamond films as protective coating in photovoltaic solar cells”, CNME 2014 - Experimental Mechanics National Congress, 15 - 17 October 2014, University of Aveiro, Portugal (ORAL)

 

17.              B. Mestre, V.F.S. Neto, “PVD coatings on microcavities for injection molding”, CNME 2014 - Experimental Mechanics National Congress, 15 - 17 October 2014, University of Aveiro, Portugal (ORAL)

18.              2014 / Luís Vasconcelos, Ana Bastos Silva, Álvaro Maia Seco, Sílvia Santos, Paulo Fernandes, Margarida C. Coelho, Turbo Roundabouts: Multicriteria Assessment on Intersection Capacity, Safety, and Emissions, 11.º Encontro do Grupo de Estudos de Transportes, Covilhã, January 2014 / http://transportes-tema.web.ua.pt/Publications.aspx.

19.              2014 / Jorge M. Bandeira, Margarida C. Coelho, Asad Khattak, Road Traffic Information Platform for Energy and Emissions Savings, 11.º Encontro do Grupo de Estudos de Transportes, Covilhã, January 2014 / http://transportes-tema.web.ua.pt/Publications.aspx.

20.              2014 / Margarida C. Coelho, Tânia Fontes, Sérgio Pereira, Jorge Bandeira, Oxana Tchepel, Daniela Dias, Elisa Sá, Jorge H. Amorim, Carlos Borrego, SMARTDECISION: Sistema inteligente de suporte à decisão de percursos para uma melhor qualidade do ar em áreas urbanas. 11.º Encontro do Grupo de Estudos de Transportes, Covilhã, January 2014  / http://transportes-tema.web.ua.pt/Publications.aspx.

21.              Victor Neto, “Advanced coating systems towards the analysis of polymer flow within microcavities”, Department of Physics Alumni Research Conference, January 6th 2014, University of Aveiro, Portugal (ORAL)

 
last updated 11/03/2015
This web site uses cookies without storing personal information that allows the identification of its users. By navigating in this web site you are consenting to the use of these cookies.more information
For this page to function properly you must enable JavaScript execution. If this is not possible some features may be limited.